
词语导航
基本信息
词语:头锥
繁体:頭錐
拼音:tóu zhuī
英语翻译
【医】 cephalic cone
相关词条
1.nosecone 2.firsthandtap 3.nose-cone分词翻译
头的英语翻译:WWW.WeNTiYI.cOm
beginning or end; cobbra; conk; crumpet; end; first; garret; hair; headleading; nob; noddle; pate; sconce; side; top; twopenny
【医】 capita; caput; cephal-; cephalo-; head; kephal-; kephalo-
锥的英语翻译:
awl; prick; wimble【医】 cone; drill
翻译例句
1. 本文给出了绕弯曲头锥理想气体超音速流动差分数值计算方法。
This paper presents a numerical calculation with finite difference method for supersonic flow of ideal gas over bent cones.
2. 最后利用基于物理的能量曲面造型方法构造与弹身和长边条面G-1连续的头锥过渡面。
Then the forward 3-sided surface is generated based on energy minimization and is G-1 continuous contact with the missile"s body and the long fringe surface.
3. 采用二维轴对称弹塑性有限元法对比分析了不同外模模角和游动芯头锥角的配合对拉拔铜管的影响。
This paper focuses on the comparison of the matching of dies and floating plugs with different Angle with the aid of 2d axisymmetric elastic-plastic FEM and the influence of drawing copper tubes.
4. 中国商用飞机有限公司,该大型喷气式客机制造商,周五表示:由成都飞机工业公司制造的飞机的头锥部分,将于明年进行装备和测试。
The nose, made by Chengdu Aircraft Industry Co, will be equipped and tested next year, Commercial Aircraft Corp of China, the jumbo jet maker, said Friday.
5. 一种锥型,通常是圆头引导器形状的器件,一般出现在套管柱的最下端。
A tapered, often bullet-nosed piece of equipment often found on the bottom of a casing string.
6. s头管-标准大柄接受器和锥设计,传统反应特点,用于SL 4747和SL 4762。
Leadpipe - features Remington large shank receiver and longer taper designed for traditional response characteristics. For SL4747 and SL4762.
7. 本文给出钝头细长锥无粘、平衡和非平衡高超声速绕流流场的数值分析。
This paper presents a numerical analysis of inviscid equilibrium and nonequilibrium hypersonic flow past blunt-nosed slender cones.
8. 该方程适用于滚子为柱型或锥型凸轮为槽定位或脊定位、单头或多头、左旋或右旋、上转或下转的情况。
The equations is used whether roller is column or cone, cam is in spine or groove location, left or right helical, single head or many heads and how it is turning.
9. 本机组有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件组成。
The unit is composed of hydraulic and double conic placing, hydraulic spading and drawing, straightening, shearing, end stopping, coiling, feeding, dropping cart, ect.
10. 本文着重介绍了分片制造的圆筒、锥筒和封头的制造工艺。本文还介绍了其预装方法以及为了防止制件在运输中变形和合理包装方法。
This paper describes the shell manufacture of petal-pieces of circle shell, conical shell and head. The preassemble method and reasonable packing is also described.
11. 利用一个标准锥,即可实现光笔测头的现场标定。
Simply with a standard cone, the probe tip center can be calibrated.
12. 给出了锥球头铣刀上新的刃口设计方法,并给出锥面和球面上连续的新设计方法对应的刃口曲线求解模型;
The paper introduces a new designing method of cutting edge of conical ball nosed milling cutter and the defining model of the cutting edge corresponding to the new designing method;
13. 给出了锥球头铣刀上新的刃口设计方法,并给出锥面和球面上连续的新设计方法对应的刃口曲线求解模型;
The paper introduces a new designing method of cutting edge of conical ball nosed milling cutter and the defining model of the cutting edge corresponding to the new designing method;
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
