短裂纹用英语怎么说,短裂纹的英文翻译


词语导航

基本信息

词语:短裂纹

繁体:短裂紋

拼音:duǎn liè wén

英语翻译

【化】 short crack

分词翻译

短的英语翻译:

brief; fault; lack; owe; short; weak point
【医】 brachy-; brevi-

裂纹的英语翻译:

crackle; flaw
【化】 cracking; flaw; tear
【医】 fissura; fissure

翻译例句

1. 建立了概率模型表达短裂纹的扩展。

A probabilistic model is developed in this article to express the propagation of short cracks.

2. 充氢条件下,大大加速短裂纹疲劳扩展。

Short fatigue crack propagation is much accelerated by filled hydrogen.

3. 两种短裂纹长大到一定深度时均停止扩展。

The two types of short cracks stop propagating on reaching some depth.

4. 短裂纹阶段,疲劳裂纹以角裂纹的形式向内扩展;

In the steady propagating stage, the fatigue crack extended in a toughness tearing way of crystal penetrating.

5. 依据分析给出化学短裂纹扩展速率与裂纹尺寸之间的关系。

Based on the analysis, the relation between the short crack propagation rate and crack size has been put forward.WwW.WENtiYi.COM

6. 本文对孔边三维短裂纹扩展特性进行试验研究和理论分析。

In this paper, the behaviour of small crack growth originating at the edge of a hole was studied experimentally and theoretically.

7. 本文对采用喷丸处理改善结构钢的短裂纹断裂性能进行了探讨。

This method is also proved to be reasonable based on experimental data of fatigue short crack at notch.

8. 本文对采用喷丸处理改善结构钢的短裂纹断裂性能进行了探讨。

In this paper, an attempt has been made to improve the short-crack fracture characteristics of structural steel by the application of shot peening.

9. 同时,显露出强的短裂纹效应,系因裂纹闭合效应的尾迹依赖性。

On the other hand, the stronger short crack effect is exhibited, which is attributed the dependent mentality of closure effect on crack wake.

10. 试验和分析结果表明,短裂纹扩展的偏折强烈,裂纹闭合效应较小。

The results turn out to be that the short cracks exhibit severe crack deflection and week crack closure effect.

11. 预测和实测寿命对比表明,基于短裂纹扩展特性的预测能力有显著改善。

As compared with the experimental life it shows that the predicting ability based on the growth characteristics of short fatigue crack was improved obviously.

12. 通过扭转疲劳试验和塑料复型膜技术研究了中碳钢试样的疲劳短裂纹特性。

The initiation stage and short crack behaviour in torsional fatigue of medium carbon steel was investigated by using a replication technique.

13. 常规无损检测方法难以对构件内部短裂纹的启裂和扩展过程进行有效的监测。

Regular NDT (Nondestructive Testing) methods cannot monitor the initiation and expansion process of short cracks inside components effectively.

14. 短裂纹扩展研究:微观组织结构对疲劳短裂纹扩展的影响程度取决于裂纹的长度。

Short cracks propagation research: the degree of Microscopic structure influence to the fatigue crack propagation depends on crack length.

15. 采用复型方法对中碳结构钢单边钝缺口试样的非穿透和穿透疲劳短裂纹的演化过程进行了研究。

The transformation behavior of vanadium middle carbon steel during continuous cooling was investigated by means of THERMECMASTOR-Z thermomechanical simulator.

16. 为得到宽范围内的疲劳短裂纹扩展数据,分别对不同试样缺口尺寸和不同载荷条件进行了疲劳试验。

To obtain data of the fatigue short cracks progression in large extent, specimens with different circle indentation gauge were tested and different load condition was applied.

17. 第一部分阐述了短裂纹研究的理论和实际意义,给出了目前对短裂纹的两种定义和短裂纹形成原因的三种解释。

In the first part, the theoretical and practical significances were represented, two kinds of definition for short cracks and three sorts of explanation for its initiation were given.

18. 木文研究了间接直流电位法(IDC法)和交流电位法(AC法)用于监测疲劳短裂纹扩展速率的有关技术问题。

The technique of measurement of growth, rate of fatigue short crack with indirect KC (IDC) potential system and AC potential system was investigated.

19. 通过短裂纹群模拟及像素合并处理方式,在进行低分辨率CT图像的演化分析时,检测到短裂纹扩展引起的异常。

Short cracks were simulated and pixels were merged, evolvements of low resolution CT images were analyzed, abnormity induced by propagation of cracks was detected.

20. 结果表明,疲劳损伤会引起材料力学性能产生一定程度的退化,这一退化现象与试样表面短裂纹的演化过程密切相关。

The results showed that fatigue damage could lead up to the degeneration of the mechanical properties to a certain extent.

21. 对两种晶粒尺寸的中碳钢光滑试样进行了旋转弯曲疲劳试验;应用复型技术监测了短裂纹形成与扩展过程,研究了晶粒尺寸对短裂纹行为的影响。

The process of crack initiation and propagation was observed through replication, and the effect of grain size on the behaviour of short fatigue cracks was studied.

22. 通过扫描电镜、透射电镜、光学金相等手段对LY12CZ铝合金疲劳短裂纹的微观机制进行了分析研究,结果表明,材料的微观组织对短裂纹扩展行为有很大影响。

The micro-mechanism of short crack and the influence of micro-structures on short crack propagation have been investigated by OM, SEM and TEM for a LY12CZ Aluminium alloy.

23. 非集结部分出现部分微裂纹愈合,密度反向变化,有助于解释一些前兆记录在短临阶段记录中出现反向的现象。

The part out of nucleation where some microcracks heal and the density change reversibly may be helpful to interpret the phenomenon that some precursors records appear reverse change.

24. 电镜分析指出,复相组织疲劳性能高的原因是复相组织中的下贝氏体回火后析出短杆状碳化物,能有效地阻止疲劳裂纹的萌生及扩展。

TEM analysis reveals that the precipitation of short-bar-shaped carbides in lower-bainite can prevent effectively from initiation and propagation of fatigue cracks.

25. 根据表面裂纹扩展规律及工程实际,给出了管状杆件表面的实际短、长裂纹范围。

According to the propagation rules of the surface cracks and the engineering practices, have been given the practical range of permissible short and long cracks on the tube surfaces.

26. 介绍了减速机机壳裂纹的电弧冷焊法,采用“短段、断续、分散焊”的工艺,有效地解决了这一难题。

Reducer chassis craze repairing method which adopts short craze welding, interrupted welding and dispersed welding is introduced and effectively solves this difficult subject.

27. 沿海岸线设置的球员可以发挥出左 ,并以此作为短的4杆 ,或在有利条件,有在从发球绿色裂纹。

Set along the coastline, the golfer can play out left and treat it as a short par four or in favorable conditions, have a crack at the green from the tee.

28. 沿海岸线设置的球员可以发挥出左 ,并以此作为短的4杆 ,或在有利条件,有在从发球绿色裂纹。

Set along the coastline, the golfer can play out left and treat it as a short par four or in favorable conditions, have a crack at the green from the tee.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!