横向进给用英语怎么说，横向进给的英文翻译

词语导航

基本信息

词语：横向进给

繁体：橫向進給

拼音：héng xiàng jìn gěi

英语翻译

【机】 crossfeed; surfacing feed

分词翻译

横向的英语翻译：

crosswise
【计】 landscape; landscape orientation

进的英语翻译：

advance; come into; enter; move forward; receive; resent; score a goal
【经】 index numbers of value of imports or exports

给的英语翻译：

allow; give; grant; let; tip
【医】 administer

翻译例句

1. 介绍数控短电弧加工机床的总体结构及其横向进给机构的设计。

The whole framework of the short arc machining tool and it′s landscape framework design are introduced.

2. 与一般采用纵向进给的车削作业相反，那些侧表面通过采用横向进给产生。

Those side surfaces are generated through the use of the cross feed, contrary to turning operations, where the usual longitudinal feed is used.

3. 所有液压设备都要进行调节，并在规定的的速度下进行横向进给和提升运动操作。

All equipment should be adjusted to operate at the required speed and with the specified traverse and lift motion for all hydraulic equipment.

4. 在完全密封、无尘的管道内，将精细分类、易流动的材料从横向进给点输送到卸载点。

It is designed to transfer finely divided, flowable bulk materials from infeed points to discharge points through a totally enclosed, dust tight pipeline.wWw.WenTiYi.cOm

5. 本文论述垂直和横向进给量的公制与英制共用机构，自动快速移动和自动微量进给机构。

This article describes the vertical and cross feed mechanism for both metric and inch system. It is able to perfom automatic, rapid travelling and micro feed.

6. 它主要包括纵向进给机构，横向进给机构的设计，及伺服电机，滚珠丝杠的选择等任务。

It includes vertical feed, horizontal feed mechanism design, and servo motor, ball screw options, and other tasks.

7. 砂轮作旋转主运动，工作台作纵向往复运动，砂轮架作间歇的竖直切入运动和横向进给运动。

Grinding wheel for the rotating main movement, workbench as a vertical reciprocating motion, grinding wheel rack for intermittent movement into the vertical and horizontal feed movement.

8. 在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。

During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.

9. 横向方法：这种方法中砂轮与工件均旋转且采用线性纵向进给以保证能磨削整个长度。

The transverse method, in which both the grinding wheel and the workpiece rotate and longitudinal linear feed is applied to enable grinding of the whole length.

10. 刀具还可以设置一种边切进给率，以使用于横向的刀具移动。

The tool can have an additional "side-increment" feedrate, which is applied to step-over moves.

11. 轴向进给通过大拖板或复式刀架手动或自动提供，然而切削深度则由横向滑板控制。

The axial feed is provided by the carriage or the compound rest, either manually or automatically, whereas the depth of cut is controlled by the cross slide.

12. 轴向进给通过大拖板或复式刀架手动或自动提供，然而切削深度则由横向滑板控制。

The axial feed is provided by the carriage or the compound rest, either manually or automatically, whereas the depth of cut is controlled by the cross slide.