
词语导航
基本信息
词语:有限形变
繁体:有限形變
拼音:yǒu xiàn xíng biàn
英语翻译
【化】 limited deformation
分词翻译
有限的英语翻译:
【化】 limited
形变的英语翻译:
【化】 deformation
翻译例句
1. 拓展了结构分析有限条法,基于固体力学有限形变理论的更新拉格朗日法(U 。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
2. 结果表明,若仅是为了测定点的垂直位移的高程速率,增加重力测量数据后对形变分析的精度增益十分有限。
Itturns out that the accuracy increase is quite limited by using gravity observation to analyse vertical deformation, if the aim is only to determine point vertical displacement and its velocity.
3. 本文用有限单元法按平面形变情况分析了五座锚定板挡土结构,发现分析结果与现场实测数据相当接近。
Five of these anchor slab structures were analyzed by finite element method in plane strain case, and the results of analysis are fairly close to the data obtained from field observations.
4. 应用有限元方法计算静水压力变化下几种橡胶吸声结构的形变和吸声性能。
We applied the finite element method to study the variation of sound absorption structure and performance of rubber material under variable hydraulic pressure.
5. 文摘:研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法,并实现了计算程序。
Abstract: the method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
6. 本文是在激光全息无损检测(简称HNDT)高聚物研究中,利用有限元计算方法,对其叠层粘接缺陷在真空负压载荷下形变量进行计算。
The finite element method is used in the study of HNDT for bonding defects of polymeric substances under vacuum-pressure difference.
7. 应用有限元方法计算静水压力变化下几种橡胶吸声结构的形变和吸声性能。
The results show that the variation of static hydraulic pressure does not significantly affect the deformation and sound absorption performance of the structure with compound cavum.
8. 用有限元方法分析了原型装置真空靶室的真空形变。
The vacuum shape change of vacuum target chamber in prototype facility has been analyzed using finite element method.
9. 研究了基于形变理论的金属板料成形有限元分析的理论和方法,并实现了计算程序。
The theory and method of finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
10. 基于线性硬化材料形变理论,本文提出了一种计算结构极限载荷的有限元简化算法。
Based on the deformation theory of linear hardening materials, a simplified finite element analysis method is proposed to calculate the limit load of structures.
11. 重点介绍了共混型热塑性弹性体形变机理的几种模型,包括不均匀变形、有限元模型、微孔模型等。
The deformation mechanism of thermoplastic elastomer, such as inhomogeneous deformation, finite element method and microcellular model, was discussed on emphases.
12. 根据有限元分析的结果,将临界荷载转换为临界弯矩,求出了梭形变截面工字形简支钢梁的变截面系数。
According to the results of finite element analysis, the critical load has converted to the critical moment, and the tapered coefficient of tapered simply-supported I-beams has been calculated too.
13. 反向模拟结合了塑性形变理论和有限元技术,直接由工件反算出毛坯。
Raverse analysis, based on the plasticity theory of deformation and FEM, however, can calculate the blank contour directly from a given part.
14. 应用有限元分析软件,实现了对一人字形变电构架的高等分析,论述了高等分析的过程。
Finite element analysis software is used to realize the advanced analysis of character shaped power-transmission frame.
15. 依据理想形变理论,研究开发了冲压成形过程模拟的有限元逆算法,并考虑了成形中的压边力,拉延筋等工艺条件,实现了计算机程序。
Based on ideal deformation theory, the authors developed a finite element inverse approach for sheet metal forming process simulation, and the computer program was implemented.
16. 理想形变假设认为变形是在整体塑性功取得相对极值的条件下得到的,给出了理想形变的数学公式和有限元表达。Www.wEnTIYI.cOM
The mathematics formula and FE expression of ideal forming obtained when the global plastic work has its relative extreme value is provided.
17. 结合几个光学工程的设计实例,概括了有限元法在光学系统结构应力分析、形变分析和动态特性分析等方面的应用。
Some examples on optical engineering are provided to illustrate its different applications on stress analysis, strain analysis and dynamic analysis etc.
18. 在本文的数值计算中,采用了有限伸展非线性弹簧模型(FENE)珠-簧链来模拟聚合物分子链,通过计算得到了FENE链在不同初始条件下的迁移运动及其构形变化。
In this paper, FENE bead-spring chain was used to model the polymer molecular. The migration motion and the configuration change of the FENE chain were simulated for different initial conditions.
19. 研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法 ,并实现了计算程序。
The residual stress around a coldworked hole is computed with elastoplastic finite element methods of both flow theory and deformation theory.
20. 用ANSYS建立有限元模型,分析由温度场引起的光学镜面形变。
An finite element model is established by ANSYS, the deformation of optical mirrors caused by temperature field is analyzed.
21. 针对增量有限元求解用时过多的问题 ,采用形变理论并利用理想形变的假设 ,导出用于板料成形设计的一步法 。
Based on the assumption of ideal forming theory and plain stress, the FE equations for axisymetric multi-step deep drawing inverse simulation are formulated with linear membrane element and .
22. 机械制造;板料成形;理想形变理论;有限元;
Sheet metal forming; Ideal forming theory; Finite element;
23. 应用有限元方法计算静水压力变化下几种橡胶吸声结构的形变和吸声性能。
Study on sound absorption and insulation of gypsum board structure and its application;
24. 应用有限元方法计算静水压力变化下几种橡胶吸声结构的形变和吸声性能。
Study on sound absorption and insulation of gypsum board structure and its application;
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
