热应力用英语怎么说,热应力的英文翻译


词语导航

基本信息

词语:热应力

繁体:熱應力

拼音:rè yīng lì

英语翻译

【化】 heat stress; thermal load; thermal stress

相关词条

1.thermalstress  2.thermalload  3.temperaturestress  4.temperaturestresses  

分词翻译

热的英语翻译:

ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-

应力的英语翻译:

stress
【化】 stress
【医】 stress

翻译例句

1. 分析了热应力的概念及其评价指标。

The concept of heat stress and its evaluating index are analyzed.

2. 最大热应力出现在制动过程中;

The maximal thermal stress appears during the brake process.

3. 它们能很好地耐受重负荷和热应力。

These withstand heavy loads and thermal stresses well.

4. 研究了塑性变形对残余热应力的影响;

The effect of plasticity deformation on residual thermal stress was investigated.

5. 制程电镀管控是否有热应力切片试验?

Are thermal stressed cross-sections performed as an in-process plating control?

6. 而其热应力分布问题是其中的主要因素。

And the distribution of thermal stress is one of the primary factors.

7. 在热应力测试之前是否确认锡炉的温度?

Is the temperature verified on the solder pot before coupons are thermal stressed?

8. 主屏体被若干伸缩缝隔断以消除热应力。

A main screen self secluded hot stress by extend slits.

9. 汽缸的热应力,对汽轮机的运行安全很重要。

Thermal stresses in a turbine casing are important for safety operation.

10. 这种不均匀冷热过程,会使工件中产生热应力。

This uneven hot and cold process, the workpiece will produce thermal stress.

11. 探讨了增强模型、热应力损毁机理和性能测试。

Physicalmodels, thermal stress induced failure mechanisms and property studies are discussed.

12. 阐述了改善界面热应力和界面缺陷的工艺措施;

This includes some processing measurements for improving interfacial stress and defects.

13. 温度和热应力是罩式退火过程中的两个重要参数。

The temperature and thermal stresses are important parameters in the process of bell type annealing.

14. 同时,钎缝圆角几何形状对这一热应力分布有重要影响。

Meanwhile, the fillet geometry has played an important role on this thermal stress distribution.

15. 涂层成分的梯度化,可有效地缓和制备过程中的热应力。

The gradient distribution of coatings" composition can effectively reduce thermal stress during fabrication process.

16. 一种疲劳失效类型,循环应力是由于交变热应力引起的。

Thermal fatigue. A type of fatigue failure wherein the cyclic stresses are introduced by fluctuating thermal stresses.

17. 梯度热障涂层是一种新型耐热材料,可充分缓和热应力。

Gradient thermal barrier coatings, a new type heat resisting material, can sufficiently release heat stresses.

18. 更早的研究已经证实热应力会增加肉变得“苍白、松软、干瘪”的风险。

Prior studies have demonstrated that heat stress can increase the risks of what"s known as "pale, soft, exudative" (PSE) meat.

19. 本文采用有限元法分析了板上芯片(COB)的热应力分布。

The finite element method was used for analysis of heat stress in chip on board(COB).

20. 本文采用有限元法分析了板上芯片(COB)的热应力分布。

The finite element method was used for analysis of heat stress in chip on board (COB).

21. 位错的形成与离子注入引进的损伤和淬火过程中的热应力有关。

The ion-implantation damage defects and thermal stress during quenching step are responsible for the formation of dislocations.

22. 然后,根据温度场的分布结果计算出模块内部热应力场的分布状态。

The thermal stress distribution can be obtained from the calculated result of temperature field in the packaging.

23. 对于不规则热应力作用下的身管弯曲重点分析了身管壁厚差的作用。

For irregularly hot stress acting tube curve, it stressfully analyzes effect of body tube wall thickness difference.

24. 本研究用热弹塑性方法分析铸造应力框自凝固到冷却过程动态热应力。

In this research work, the thermal elastic-plastic method is used to analyze the dynamic thermal stress in the stress-frame specimen during its solidification and cooling process.WWw.wENtiYi.cOm

25. 为此,本文提出开发汽轮机转子热应力与疲劳寿命损耗在线监测系统。

So, online monitor system of steam turbine rotorthermal stress and fatigue life need to be developed.

26. 因此,从热应力能引起裂纹产生角度看,铜冷却壁性能优于铸铁冷却壁。

Therefor, the property of the copper staves is better than that of the staves of cast iron.

27. 铸件-铸型之间的相互作用对铸件凝固过程中热应力的分布有很大的影响。

The interaction between casting and mold has a significant effect on the distribution of thermal stress during solidification.

28. 本文的结论对于减小冷却管热应力,防止凝汽器密封破坏,具有参考价值。

This conclusion is some value to decrease thermal stress of cooling tubes and protect the sealing.

29. 研究了梯度材料在承受热冲击载荷作用时的动态热应力响应分析模型问题。

The dynamic thermal stresses responses analysis model problems of metal-ceramic functionally graded materials (FGMs) under thermal shock load are studied.

30. 阀座碟簧提供了连续的机械压力,保证热应力变化时球体与阀座始终密合。

The valve saucer reed offers the continuous mechanical pressure, guarantee the spheroid and valve seat are closely fitted all the time when the hot stress changes.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!