程序回路用英语怎么说,程序回路的英文翻译


词语导航

基本信息

词语:程序回路

繁体:程序回路

拼音:chéng xù huí lù

英语翻译

【电】 program circuit

分词翻译

程序的英语翻译:

formality; ground rule; procedure; proceeding; process; program
【计】 P; problem determination aid; PROC; program; related channel program
【化】 sequence
【经】 program; sequence

回路的英语翻译:

loop; return circuit
【计】 return circuit
【化】 circuit; loop
【医】 circuit

翻译例句

1. ESB然后在实际服务提供程序之间来回路由消息。

The ESB then routes messages to and from the actual service provider.

2. 本文提出从程序特征及生产条件出发选用流体逻辑回路设计方法。

This paper puts forward a method of designing fluid logic circuit according to program characteristics and productive conditions.

3. 利用可编程序控制器实现仪表回路的PID调节控制。

PID regulation in instrumentation circuit is realized by using program logic controller.

4. 该系列软件的功能昱准控制阀回路定制功能,这样可以调整到应用程序。

The Sentronic series software features control loop customization so the valve can be tuned to the application.

5. 电机场路结构设计、控制器主回路换流模式设计、TMS320F 240最小系统设计、程序设计充分考虑了故障应急状态下系统正常运行必要条件。

Designs on motor field and structure, controller main circuit current commuting mode design, TMS320F240 least system and system program consider system normal operation under fault condition fully.

6. 本文介绍了KLG - 50型空气等离子弧切割机的主回路,控制电路和程序控制电路的工作原理及调试结果。

The principle and adjustment result re of the main circuit, control circuit and program control circuit of our KLG-50 plasma arc cutting machine are introduced in this paper.

7. 介绍了一种DCS开放式组态软件,并详细叙述了面向对象程序设计方法和控制回路识别技术。

The paper introduces an open configuration software of distributed control systems (DCS), especially describes the object oriented programming design and the techniques of control loop identification.

8. 因此,本组态软件提供的这样一个平台,让控制工程师能集中精力于控制回路的构成,而不必拘泥于一些具体而烦琐的程序操作。

So the configuration software offer a flat that control engineers can attend to control loop, not to give their attention to the complicated program.

9. 就三种回收方案中,对液压回收方案的液压回路进行了设计,并用MATLAB程序对活塞回收过程进行了动态仿真。

Among three projects, the hydraulic pressure loop is designed and the dynamic simulation for piston reclaiming process is performed with MATLAB program.

10. 通过修改PLC程序,利用液压差动回路实现轻压下,提高了铸坯质量。

After the modification at PLC program, the soft reduction is achieved via hydraulic differential circuit and the billet quality is improved.

11. 因此,本组态软件提供的这样一个平台,让控制工程师能集中精力于控制回路及逻辑保护(包含电气逻辑)的构成,而不必拘泥于一些具体而烦琐的程序操作。

So the configuration software offer a flat that control engineer can attend to the structure of control loop and logic protect(include Electric logic), not but to handle complicated program.

12. 机械的部件以这样的方式动作形成一条多样化的电子回路- - -以电力执行实际加密程序的字母。

The mechanical parts act in such a way as to form a varying electrical circuit - the actual encipherment of a letter is performed electrically.

13. 设计了气动控制回路和PLC电气控制程序;

The pneumatic circuit and the PLC-based control system are designed.

14. 叙述了STB—4201四回路可编程序调节器在醋酸氧化塔的应用,结合具体工艺,进行了组态编程,应用效果良好。Www.WeNTiyI.cOM

The application of STB-4201 four loop programmable controller in HAC reactor, is recounted with process configuration and programming. Safisfactory results are obtained.

15. SCAS是中国核动力研究设计院编制的反应堆二回路蒸汽活化产物源项程序。

SCAS is the source term code to calculate steam activation products in secondary loop of reactor, which is developed by Nuclear Power Institute of China.

16. 该程序对工况复杂的多回路远程巨型控制系统有广泛的应用价值。

The program is extensive applied value in much branching remote great control system with complicated working condition.

17. 提出一种以pic单片机为控制核心的三相异步电动机软起动控制器,阐述了该控制器的工作原理、回路结构图和软件程序结构。

A soft starting controller of the asynchronous mot or based upon PIC microprocessor is proposed and the operational principle of the controller, functional block diagram and flow chart are given.

18. 还给出了起、停车时两回路的液压控制程序框图,并对系统采用电液比例控制技术等相关问题进行分析、研究。

And to give the two hydraulic control flow diagrams, and research on the electro-hydraulic proportional control technology used by the system.

19. 控制回路参数可优化的使用数据采集软件(DAS)和PC机连接的应用程序。

Control loop parameters can be optimized for an application using Data Acquisition Software (DaS) and a PC connection.

20. 控制回路参数可优化使用DAS的应用程序。

Control loop parameters can be optimized for an application using DaS.

21. 控制回路参数可优化使用DAS的应用程序。

Control loop parameters can be optimized for an application using DaS.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!