变形铸件用英语怎么说,变形铸件的英文翻译


词语导航

基本信息

词语:变形铸件

繁体:變形鑄件

拼音:biàn xíng zhù jiàn

英语翻译

【机】 strained castings

分词翻译

变形的英语翻译:

transmute; distort; metamorphose; distortion; metamorphism; transfiguration
transformation; transmutation
【化】 anamorphosis; deformation; distortion; transform
【医】 allaxis; deformation; deformity; distortion; dysmorphia; dysmorphosis
malformation; metallaxis; metamorphosis; transformation

铸件的英语翻译:

cast
【电】 casting

翻译例句

1. 压铸模具的型芯变形失效很容易造成铸件的成批量报废。

During die casting, core deformation resulting in batches rejected castings is very easy.

2. 实践证明:该法铸造成本较低、操作简单,且铸件壁厚均匀、变形量小、铸造缺陷较少。

It is practically verified that this method exhibited less expense, easy operation, cast wall with uniform thickness, deformation decrease and cast defects reduction.

3. 该铸件容易变形和产生表面缩凹、部缩孔。

The casting is easy to suffer from deformation, surface sink and internal shrinkage.

4. 计算结果与实验结果一致,为预测铸件变形、优化铸造工艺提供了经济、有效的方法。

The consistency between the numerical and experimental results proves the proposed method to be economical and effective to predict the casting deformation and finally optimize the foundry technology.

5. 采用高淬透性钢进行空冷淬火是一种减少铸件热处理变形和开裂的有效措施。

It"s a feasible practice to quench in air for castings made of steels with higher hardenability to reduce or avoid its deformation and crack during heat treatment process.

6. 根据铸件结构特征和不同区域拘束度的不同,设置不同的反变形系数,对原始模型进行反变形处理。

Different anti-deformation coefficients were set on the original mode, according to casting structural features and binding in different regions.

7. 对倾斜浇注工艺特点、冒口设计、倾斜高度和防止铸件变形等作了详细介绍并举出应用实例。

Technique character, riser design, tilting height and deformation avoiding of casting in tilting pouring casting process for cast steel has been introduced with examples.

8. 综合考虑凝固、冷却、打箱、切除浇注系统和热处理影响建立数值模型,准确预测铸件在整个热加工工序中的变形。

Numerical model was established after considering solidification, shake out, clearing getting system and heat treatment to predict the casting deformation during hot working processes.

9. 设计了铸件变形强化测试装置,测定了几种不同材质的铸件抗变形能力。

In this paper, an apparatus for distortion intensive measurement of casting is designed to test the distortion resistance of several kind of casting materials.

10. 牵引梁为薄壁、内空箱体整体铸造构件,铸件容易出现搓扭和弯曲无规律性变形。

F draft sill is an integrated casting component with thin wall and inner empty box, and irregular deformations like torsion and bending occur easily.

11. 以杆状铸件变形实验结果为依据,分析了铸造变形机制;

Based on the experimental result of bar shape casting, the deformation mechanic of castings was analyzed.

12. 介绍了防止熔模铸件变形的几种措施。

Some countermeasures of preventing the deformation of castings in investment casting were expounded.wwW.WeNTIyI.cOm

13. 其一是在模具上安装顶杆提前回位拉杆,铸件变形的情况得到了改善,铸件抱死在静模的现象也减少。

Advanced preset pull rod for pressure rod was assembled on the mould to improve the deformation of the housing and reduce the housing soldering the static container.

14. 一方面,基于叶片收缩变形位移场的有限元仿真结果,更为准确地计算铸件不同部位的收缩率;

On the one hand, casting shrinkages at different positions of the blade are considered as nonlinear thermo-mechanical casting deformations that are calculated with accuracy by finite element analysis.

15. 缸盖铸件在冷却过程中由于收缩不均匀产生变形,导致气道位置偏差。

Due uneven contraction, the cylinder head castings often deform and cause deviation of the ports position.

16. 同时在铸造过程中,必须采取措施解决镶铸管因受热膨胀而产生弯曲变形、被液态金属熔穿和减少铸件的热应力等问题。

Meantime, in the course of casting, we shall take measures to solve the problems such as the bending and deformation due to the heating expansion of embedded steel pipes...

17. 分析了薄壁壳体零件压铸的工艺性,采用顶板推出机构,解决了薄壁压铸件成型推出变形问题。

This paper analyses die casting process for shell part of thin wall, and a die-casting mould adopt pusher mechanism to solve the deforming problem of thin wall die-casting.

18. 为了保证精铸件的成形精度,制造所用的模具型腔必须对铸件的收缩变形进行补偿。

In order to ensure the forming accuracy of castings, it is necessary to consider the compensation for the shrinkages in the mould cavity for turbine blades brought by the solidification process.

19. 文中还分析了覆膜砂在常温和高温下的变形—断裂机理,指出其热稳定性是影响壳型铸件尺寸精度的首要因素。

The mechanisms of their deformation-crack phenomena at ambient and high temperatures are discussed and it is pointed out that the thermal stability of resin-coated sand…

20. 文中还分析了覆膜砂在常温和高温下的变形—断裂机理,指出其热稳定性是影响壳型铸件尺寸精度的首要因素。

The mechanisms of their deformation-crack phenomena at ambient and high temperatures are discussed and it is pointed out that the thermal stability of resin-coated sand…

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!