备用程序用英语怎么说,备用程序的英文翻译


词语导航

基本信息

词语:备用程序

繁体:備用程序

拼音:bèi yòng chéng xù

英语翻译

【电】 fallback procedure

分词翻译

备用的英语翻译:

【计】 preemergency; stand-by; stand-by application
【经】 stand by

程序的英语翻译:

formality; ground rule; procedure; proceeding; process; program
【计】 P; problem determination aid; PROC; program; related channel program
【化】 sequence
【经】 program; sequence

翻译例句

1. 在复制了滞留的数据之后,即可在主系统上启动应用程序,将备用数据发送到主系统。

When the stranded data is replicated, the standby data can be sent to the primary by starting the apply program on the primary system.

2. 而微软这次的Menlo项目则将兼收这两种系统的优点,在其中寻找一个最适合的平衡点,将移动设备用UI和桌面级质量的程序等优势融合在一起。

Menlo may strike a balance between the two by allowing a mobile UI but desktop-quality apps.

3. 两个站点均运行日志捕捉和应用程序,但在这个经过简化的场景中,数据仅进行单向复制,即从主站点复制到备用站点。

Running at both sites are log-capture and apply programs, but in this simplified scenario, data is only replicating one way — from primary to standby.

4. 要避免这种中断,可以在该集群内的另一个队列管理器上定义该队列,这样,当您迁移一个队列管理器时,应用程序就可以使用备用队列。

You can avoid these outages by defining the queue on other queue managers in the cluster, so that whilst migrating one queue manager, applications can use the alternate queues.

5. 复制将在更新后的应用程序到达备用系统时立即开始排队更改后的数据,以备恢复主站点。

Replication will begin queuing changed data for return of the primary site as soon as the updated apps hit the standby system.

6. 然后,DB2驱动程序将使用该备用服务器信息连接到正确的 DB2 服务器。

The DB2 driver will then use the alternate server information to connect to the right DB2 server.

7. 不过,备用服务器信息将仅存储在JDBC驱动程序端的内存中。

However, the alternate server information will only be stored in memory on the JDBC driver side.

8. 随后,应用程序就知道要转换到备用服务器。

The application then knows to switch to the secondary server.

9. 在11.1中,备用服务器只允许应用程序读取数据。

In 11.1, the secondary servers only allowed applications to read data.

10. 在应用程序重新尝试连接之后,它应获得一个到备用数据库的新连接。

Once the application retries, it should obtain a new connection to the standby database.

11. 设置了一个故障转移连接,用于将更新的应用程序自动从主站点切换到备用站点。

A fail-over connection is set up for automatic switchover of updating apps from primary to standby.

12. 应用程序可移回主系统,但最好等到应用程序首先完成备用系统的积压工作再移动。

Apps can be moved back to the primary, but it is best to wait until the apply program gets through the standby"s backlog first.

13. 在首次成功连接到DB 2数据库之后,DB2将使用备用服务器信息更新jdbc驱动程序。

After the first successful connect to the DB2 database, DB2 will update the JDBC driver with the alternate server information.

14. 典型示例是灾难恢复测试,其中涉及故障转移到热备用系统、测试应用程序,然后退回到主系统。

The classic example is a disaster recovery test, which involves failing over to a warm standby system, testing the applications, and then failing back to the primary systems.

15. 在首次成功连接到DB 2数据库之后,DB 2还将使用备用服务器信息更新jdbc驱动程序。

After the first successful connect to the DB2 database, DB2 will also update the JDBC driver with the alternate server information.

16. 单元素模式可以确保应用程序通常只使用类的单个实例,但是仍然允许根据需要创建备用实例。

The singleton pattern ensures that only a single instance of a class is normally used by an application, but still allows alternate instances to be created as required.

17. 在主站点发生中断时,应用程序将自动切换到备用站点,但如果您愿意,也可采用手动流程。

When an outage occurs at the primary site, the apps switch automatically to the standby site although a manual process is available if preferred.

18. 当某个活动队列管理器失败或变得不可用时,JMS应用程序会自动重新连接到备用网关队列管理器。

Automatic reconnect for JMS applications to a standby gateway queue manager when an active queue manager fails or becomes unavailable.

19. 在主数据库遭遇中断的应用程序不会将该问题暴露给终端用户,而是切换至备用服务器并重新发出连接。

Applications that encounter an outage at the primary database don"t expose this problem to the end-user; rather, the application will switch to a cataloged secondary server and issue a reconnect.

20. 对于1 -safe设置,事务在主服务器上提交后,控制权立即回到应用程序。复制到备用服务器的操作是异步进行的。

With the 1-safe setting, control returns to the application immediately after a transaction is committed on the primary server; replication to secondary server is done asynchronously.

21. 在执行故障转移(failover)操作之后,AutomaticClientReroute这个DB 2特性立即把客户机应用程序从主数据库重定向到备用数据库。

Automatic client Reroute is a DB2 feature that redirects client applications from the primary database to the standby database immediately after a failover operation is performed.wwW.WEntIyi.cOm

22. 我前面承诺过在这个应用程序里会用到少许的Linq代码,因此我准备用Linq来生成一个报告。

I promised there would be a little Linq code in this application, so I"m going to use Linq to generate a report for me.

23. 对于2 -safe设置,只有当事务在主服务器和备用服务器上都提交之后,控制权才回到应用程序。

With the 2-safe setting, control returns to the application only after the transaction is committed on both the primary and secondary servers.

24. WebSphereMQ触发机制通常是基于监控和采样启动应用程序的推荐备用方案,尽管如前所述,该特性并不适合所有环境。

WebSphere MQ triggering is usually the recommended alternative to starting applications based on monitoring and sampling, though as discussed, it is not suitable for all environments.

25. 如果您想对这项工作进行负载均衡,或者为连接db2的应用程序提供备用路径,那么Balance实用程序可以满足您的要求。

If you wish to load balance this work or provide an alternate path for connecting applications, then the balance utility may suit your needs.

26. 有助于为爬网程序优化站点的整个结构,通过提供备用的We b页面组,从而使爬网程序能够快速地访问大量的嵌入式页面并针对这些页面建立索引。

Helps to optimize the entire structure of the site for a crawler by providing an alternate set of Web pages so that crawlers can quickly access and index a large number of embedded pages.

27. 当设备用户安装或删除应用程序时,codemodulesize属性将被更改。

When the device owner installs or deletes an application, the CodeModuleSize property is modified.

28. Web应用程序对Web服务应用程序(在其中被称为备用请求)发出调用。

The Web application makes a call to the Web services application (in what is referred to as a secondary request).

29. Web应用程序对Web服务应用程序(在其中被称为备用请求)发出调用。

The Web application makes a call to the Web services application (in what is referred to as a secondary request).

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!