
词语导航
基本信息
词语:退火状态
繁体:退火狀態
拼音:tuì huǒ zhuàng tài
英语翻译
【化】 annealed condition
分词翻译
退火的英语翻译:
anneal
【计】 annealing
【化】 anneal(ing)
【医】 anneal; annealing
状态的英语翻译:
state; condition; fettle; position; predicament; status
【计】 behaviour; S; ST; state; status; transient regime
【医】 asiminine asis; condition; etat; sirupus ferri jodati; state; status
【经】 state
翻译例句
1. 退火状态ARCAP合金的伸长率高达45%,这使得可以深冲。
In annealed temper ARCAP alloys have an elongation up to 45% which allows deep drawing.
2. 结果表明:位错密度随变形量的增加而提高,退火状态时位错密度较低。
The results show that the increase of dislocation density is accompanied by the increase of deformation amount. The dislocation density has lower value when the steel is annealed.
3. 结果表明,该钢退火状态存在四种类型碳化物,淬火组织以板条马氏作为主。
The results show that there are four kinds of carbides in annealed state of the steel, and major portion of quenched martensite is lath-like martensite.
4. 高于此点,由于超过共析点钢完全由珠光体和退火状态的渗碳体组成,硬度增加并不多。
Above this point the hardness can be increased only slightly, because steels above the eutectoid point are made up entirely of pearlite and cementite in the annealed state.
5. 由于超过共析点钢完全由珠光体和退火状态的渗碳体组成,因此高于此点硬度增加并不多。
Above this point the hardness can be increased only slightly, because steels above the eutectoid point are made up entirely of pearlite and cementite in the annealed state.
6. 结果表明,退火状态的钛合金较固熔时效态的试样应力难于松弛,但这种差异随温度的升高而减小。
The result shows that the stress is more difficult to relax in ti alloy under annealing than in solution and aging, but this difference decreases, depending on the temperature increase.
7. 本文开发了一个用于连续退火炉计算机优化控制的离散状态空间模型。
We develop a fringing state space model used in the continuous annealing furnace computer optimization control.
8. 引入有限状态自动机模型和模拟退火算法来对该问题进行求解。
The model of finite state automaton and the algorithm of simulated annealing are introduced to solve this problem.
9. 文中根据混合离散变量的特点,提出了几种邻域状态的产生函数和迭代方案,给出了适宜的模拟退火过程的冷却进度表。
According to the property of mixed-discrete variable problem, an adjacent producing function states is proposed, and a suitable annealing schedule to this optimzation is given.
10. SOI衬底顶层硅呈现高阻状态,合适温度的退火可以明显降低SOI衬底顶层硅电阻率,也可部分减少外延高阻过渡层厚度。
The annealing at the proper temperature may decrease the resistivity of SOI substrate obviously and also improve the resistivity of epitaxial transitional layer partly.
11. 退火后薄膜中的晶粒尺寸和密度都有所提高,退火温度升高或退火时间延长都有助于结晶状态的改善。
High anneal temperature and long anneal time do good on increasing the size and density of silicon nano-crystals.
12. 镁基复合材料的阻尼性能与其状态关系密切,退火处理和热循环处理提高了复合材料的阻尼性能。www.wENTiYI.cOM
And it was also found the annealing treatment and the heat recycling treatment could improve the damping capacity of magnesium matrix composite.
13. 镁基复合材料的阻尼性能与其状态关系密切,退火处理和热循环处理提高了复合材料的阻尼性能。
And it was also found the annealing treatment and the heat recycling treatment could improve the damping capacity of magnesium matrix composite.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
