
词语导航
基本信息
词语:工业控制器
繁体:工業控制器
拼音:gōng yè kòng zhì qì
英语翻译
【计】 ICU
分词翻译
工业控制的英语翻译:
【计】 industrial computer; industrial control
器的英语翻译:
implement; organ; utensil; ware
【医】 apparatus; appliance; crgan; device; organa; organon; organum; vessel
翻译例句
1. 本课题的成果可以为其它高性能工业控制器的研发提供借鉴和参考。
The results of this research provide a reference for the development of other high performance industrial controller.
2. 一体化工控机是一种基于ARM 9嵌入式微处理器的通用工业控制器。
Integral industry controller is a universal industry controller based on ARM9 embedded micro-processor.
3. 基本实现了用于风力发电机组控制的嵌入式工业控制器的软件运行环境。
Thus, the software environment of the embedded industry controller which will be used in control of wind power generator has been achieved.
4. 可编程序控制器是以微处理器为基础,综合了计算机技术与自动化技术而开发的新一代工业控制器。
Programmable logical controller is a new kind of industrial controller which is developed on the bases of micro-processor and synthesizes computer and automation technology.
5. 该计划设计用于评定工业控制器的整体安全性,并对其安全性尽可能提供最完整,精确可信赖的信息。
The program is designed to assess the overall security of industrial controllers and provide the most complete, accurate and trustworthy information possible on their security.
6. 诸如信息家电、传感器、通信产品、工业控制器、掌上电脑(PDA)等各种各样的嵌入式系统,早已融入了人们的生活和生产。
The various embedded equipments , such as information wiring, sensor, communication production, industry controller and PDA etc, have entered people"s life.
7. 在分析ARM内核处理器的基础上,自主开发以ATMEL公司AT91M40800芯片为核心的嵌入式工业控制器的硬件平台。
The hardware flat of the embedded industry controller, which is centered on the ATMEL co. AT91M40800 is designed after analyze the ARM7 frame and the ARM7TDMI kernel.
8. 该系统由工业PC,DMC300运动控制器,放电状态检查卡,A/D 卡,I/O 卡和脉冲电源组成。
The system is composed of industrial PC, DMC300 motion controller, discharge status checking card, A/D card, I/O card and pulse power.
9. 介绍MODBUS协议是应用于电子控制器上的一种通用语言,它已经成为一通用工业标准。
As a general language applied in electronic control devices, MODBUS protocol is a general industrial standard already.
10. PID控制器在当前的工业过程控制中仍有着广泛的应用,但其控制参数整定一直是难点问题之一。
PID controller is widely used in the industry control process, but the parameters tuning is still a problem that people concerned.
11. 可编程逻辑控制器简称为PLC,它是以单片机为核心的工业控制专用机。
Programmable logic controller is short for PLC. It is a special purpose industry control machine, that kernel is single chip microcomputer.
12. 通过分析典型大时变时滞工业过程的特性,提出了一种新的数字PI I鲁棒调节控制器的设计方法。
A new design method of digital PII robust adjusting controller for a general process control system with large time varying time delay is developed by studying its properties.
13. 常规的PID控制器由于结构简单、实现容易,在工业控制中被广泛应用。wWw.wENTIYi.cOm
A normal PID controller is used in industry, due to its simple structure and being realized easily.
14. 接口信号电源控制器与计算机的853数码允许控制器真正应用定制任何工业加热。
Interfacing the 853 digital signal power controller with a computer allows the controller to be truly customized for any industrial heating application.
15. 改进管理的加工业务通过三阶段使用- 853数字晶闸管功率控制器,可提供实时信息的工艺参数。
Improved management of processing operations through the use of the Three-Phase 853 Digital SCR Power Controller, which provides real-time information on process parameters.
16. 采用单一传感器的单输入单输出回路控制器在工业控制领域应用非常广泛。
Single input and single output loop controller using one sensor is widely applied in the industrial control field.
17. 介绍了利用可编程控制器对继电器控制式工业洗衣机进行改造的过程,实现了系统的高稳定性和可靠性。
The original relay control system of industrial washing machine is innovated and replaced by programmable controller, good stability and reliability of the system is achieved.
18. 瓦特隆是最大的定制设计和制造工业电暖炉,传感器,控制器和软件的制造商,生产设施与办事处遍布世界各地。
Watlow is the largest custom designer and manufacturer of industrial electric heaters, sensors, controllers and software; with offices and manufacturing facilities around the world.
19. 论文的最后给出了一个工业回转窑烧结温度专家控制器的设计。
Finally, an expert controller"s design of sintering temperature of industrial rotary kiln is discussed.
20. 该算法直接利用对象辨识给出的离散模型,导出离散的内模控制器,直接用于工业生产的计算机控制。
The algorithm makes use of discrete model given by plant identification directly, deduces discrete internal model controller, and is used in computer control of industry manufacture directly.
21. 本文介绍了用PLC快速构造工业机器人控制器的方法。这个方法具有减少硬件和软件研制难度的优点。
A method of rapidly constructing industrial robot controller by using PLC is introduced in this paper the method has the advantages of reducing the hardware and software research difficulties.
22. 利用可编程器件FPGA实现VGA彩色显示控制器在工业现场中有很多的应用。
This paper introduces the implementation of VGA controller based on FPGA, which is widely applied in industry.
23. 本文介绍了一种使用DSP和视频处理芯片SAA7111AHZ实现工业用实时视频控制器的方法。
This paper presents a new method used to implement industrial real-time video controller with DSP and SAA7111AHZ.
24. 针对目前我国机载航空电子设备特别是重心控制设备的落后现状,设计一套基于工业控制计算机和可编程逻辑控制器的飞机重心自动控制系统。
This paper develops a set of barycentre of plane automat Ed control system based on industrial personal computer and programmable logic controller aiming at the defect of avionics in our country.
25. 可编程控制器在工业生产自动化过程中,显示出极大的优越性。
In the procedure of industrial manufacture automatization, programmable controller displays infinite advantage.
26. 在工业控制网络中嵌入式控制器是一种基本的接入设备。
Embedded controller is a basic access equipment in industry control network.
27. 今天的可编程控制器正在成为工业控制领域的主流控制设备,在世界各地发挥着越来越大的作用。
The programmable controller of today is becoming an industry control the essential control equipments of the realm, developing a more and more big function in the world-wide locations.
28. PID控制器在工业领域应用最为广泛。
The PID controller is most commonly used for industrial applications.
29. 经过优化的模糊控制器实施了对工业电阻炉的炉温控制。
The ameliorated fuzzy logic controller is implemented in the temperature control of industrial stove.
30. 经过优化的模糊控制器实施了对工业电阻炉的炉温控制。
The ameliorated fuzzy logic controller is implemented in the temperature control of industrial stove.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
