
词语导航
基本信息
词语:合金法
繁体:合金法
拼音:hé jīn fǎ
英语翻译
【医】 alloyage
分词翻译
合金的英语翻译:
alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy
法的英语翻译:
dharma; divisor; follow; law; standard
【医】 method
【经】 law
翻译例句
1. 用微分热分析-液淬法研究几种常用合金元素对奥氏体枝晶形成与长大形态的影响。
The effect of some common alloying elements on austenite dendrites forming had been analyzed by differential thermal-liquid quenching analysis.
2. 铝合金棒材经这一方法处理后,可呈现出良好的超塑性能。
After treatment in this way, the aluminium alloy bars present a good superplasticity.
3. 研究了用针铁矿法从铬铁合金硫酸浸出溶液中除铁并回收铬。
Remove of iron from sulfuric acid leaching solution of ferrochromium alloy by goethite is researched.
4. 研究了氧化-还原法直接再生回收高密度合金切屑粉末的工艺技术。
The processes of directly recycling high density alloy by oxidation-reduction technique are investigated in details.
5. 研究方法和主要成果如下:使用电阻炉熔炼a356铝合金,并采用斜坡冷却法进行半固态熔体的制备。
Research method and main results is as following: Using electrical resistance furnace and cooling slope to melt A356 aluminum alloy and gain the semi-solid slurry.
6. 某发动机用GH4169合金涡轮轴转动锻件由轴部和盘部两部分组成,考虑采用两步锻造法进行生产。
A two-step forging approach was taken in the production of GH4169 turboshaft of an engine, which was an integration of a disk and a shaft.
7. 本文叙述了利用基本参数法校正源激发合金元素荧光分析的基体效应的基本原理、基体效应的修正方法。
The fundamental parameter method of X-ray fluorescence analysis has many advantages, such as no concentration range limitation of elements, dispensability of standard samples and so on.
8. 基于改进Q参数法,对杂质泵合金白口铸铁件的冒口尺寸进行设计求解,所得结果用于生产中,铸件健全。
Based on the modified version of Q-method, a new riser design for the alloy white iron castings of slurry pump was made.
9. 利用浸渍法在2024铝合金表面上获得了金黄色的稀土转化膜,确定了成膜的最佳工艺条件。
A golden conversion film was obtained on the surface of aluminum alloy 2024 by immersion process. The suitable conditions of technology were established.
10. 采用电化学腐蚀法对6种牙科合金进行了实验研究。
The electrochemical corrosion method was taken to study 6 kinds of dental alloys.
11. 本文介绍了湖南铁合金厂从炉外法冶炼金属铬收尘灰中回收氧化铬、再制取金属铬的工艺及试验情况。
Process and tests on recovering chrome oxide in metal chrome dust by metallothermic reduction and then producing metal chrome in Hunan Ferroalloy Works are introduced.
12. 采用高温熔盐灼烧法研究t 2钛合金高温腐蚀动力学及腐蚀行为。
High temperature corrosion kinetics and corrosion behavior of T2 Titanium alloy were studied by oxidizing in melting salt.
13. 采用液相电解甲醇法,首次在钦合金表面沉积得到DLC膜。
A new method is developed to deposit DLC film on surface of ti alloy by liquid-deposition.
14. 用分光光度法可以测定低合金钢中的铌。
Niobium in the low alloy steel was determined by spectrophotometry.
15. 在铜合金所有的强化方式中,合金化法是一种重要的手段,特别适合于大规模工业生产。
Among all the strengthening method, alloying method is an important way, especially suitable to cosmically industry production.
16. 分析了影响合金优质量的各种因素,以及存在的基本问题,并讨论了用消失模法实现表面合金化的优点。
The factors to influence the quality of surface alloying and existing problems are analyzed, and the advantages of surface alloying of EPC castings are discussed.
17. 采用悬浮浇注法研究了ZL 201合金的遗传现象及其组织性能的影响。
The effect of heredity phenomenon on the structure properties of ZL201 alloys is investigated by floating casting.
18. 介绍了硅钙合金生产新工艺。实践表明,采用碳硅热法冶炼硅钙合金可降低电耗,延长冶炼周期,有显著的经济效益。
It introduces a new technology of producing Ca-Si alloy. The experiment showed that this process can gain better results, long smelts campaign, low power consumption and high productivity.
19. 用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
20. 利用浸渍法在LY 12铝合金表面获得了金黄色的铈转化膜,确定了常温稀土(铈)化学转化膜成膜工艺。
A golden yellow coating was obtained by immersion process on LY12 aluminum alloy surface. The process of cerium conversion coating at normal temperature was developed.
21. 因此,确定电解浸蚀法作为铜铬稀土合金定量金相分析的试样制备方法是切实可行的。
Consequently, it is feasible to determine electro-etching method as the sample preparation method about quantitative metallographic analysis in CuCrRE alloy.
22. 研究了真空蒸馏法分离废杂锌锡合金回收锌锡金属的工艺。
This paper discuss the technology of separating zinc-tin alloy to recover zinc and tin by vacuum distillation.
23. 综述了阴极改进法的原理、方法在各种合金系统中的实际应用以及阴极改进合金在酸性介质中的腐蚀行为。WWw.WeNTIYi.cOm
The mechanisms and application of cathode improvement technique in various alloy systems and corrosion behavior of cathode improvement alloy in acidic media were described.
24. 表面处理。铝和阳极氧化的铝合金。总反射率的测定。光电反射计法。
Surface treatments. Anodized aluminium and aluminium alloys. Measurement of total reflectivity using a photoelectric reflectometer.
25. 介绍采用热化学共渗法对硬质合金拉丝模芯进行超硬化处理,以提高其表面硬度的方法。
The article introduces the method of superhardening treating hard alloy drawing die core with thermochemistry copermeation method so as to improve its surface hardness.
26. 对电溶法处理废硬质合金的原理进行了分析,对电溶法处理钴含量低于8%的废硬质合金进行了工艺研究。
The technique of processing of cemented carbide scrapes is analysed, and the processing of Co(by electrochemical method is studied in the experiment.
27. 本文利用需用系数法计算了一个硬质合金车间的计算负荷。
In this article, the calculating power load was acquired by using the demanding coefficient method.
28. 本文利用需用系数法计算了一个硬质合金车间的计算负荷。
In this article, the calculating power load was acquired by using the demanding coefficient method.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
