修正齿轮用英语怎么说,修正齿轮的英文翻译


词语导航

基本信息

词语:修正齿轮

繁体:修正齒輪

拼音:xiū zhèng chǐ lún

英语翻译

【化】 corrected gear

分词翻译

修的英语翻译:

build; cobble; compile; decorate; mend; repair; trim

正齿轮的英语翻译:

【机】 spur gear

翻译例句

1. 本文推导了采用修正齿轮时三轴双公用齿轮机构的计算公式。并讨论了双公用齿轮机构优化设计的目标函数和约束条件。

The formulas for calculating 3-axis, double composite gear with addendum modification are derived. Then in this paper the object functions -and restrained conditions for optimum design are discussed.

2. 修正:字符的面部表情可以使头齿轮变形。

FIxed: Character"s facial expressions can distort up head gear.

3. 应用奥贝球铁(adi)代替合金钢制造传动齿轮并进行齿形修正,显著降低噪声水平。

The gears of austempered ductile iron (ADI) and the gear profile modification technique can effectively reduce transmitting gear"s noise.

4. 摆线齿轮具有许多优点,但是在实际应用中很少采用纯摆线齿轮,而大都采用修正摆线齿轮。

Although the cycloidal gear has much merits the pure cycloidal gear is less used in practice and the modified one is widely employed.

5. 在获得齿轮内啮合传动的齿侧间隙计算公式以后,结合齿对刚度的计算公式,推导出齿轮内啮合传动的加载重合度及载荷修正系数。

After getting the formula about the normal backlash and the stiffness of the tooth pairs of the gear, the contact ratio and the load correction factor could be obtained.

6. 结合机床调整参数、齿轮啮合原理,建立了螺旋锥齿轮齿面误差修正模型。

The error correction model of tooth surface was established by machine tool adjustment parameters and meshing principle.

7. 螺旋锥齿轮误差修正试验研究。

Experimental study on the error correction of spiral bevel gear.

8. 文中的数学模型亦可用于零前角及正前角齿轮滚刀重磨后的齿形误差计算及修正。wWw.wENtiYI.COm

The mathematical model presented in this paper can also be used in the regrinding of gear hobs with zero rake Angle and positive rake Angle for error calculation and revision.

9. 在定量分析了两者对齿轮精度的综合影响之后,运用反补偿法预先修正齿形凹模,并进行了齿模电极的设计。

Quantitatively analyzing the effect of two to the profile of tooth, the inversing compensation method is then put forward to modify the die cavity and the electrode is designed.

10. 该方法已应用于东风汽车变速器齿轮齿形、齿向预修正的标准中。

This method has been applied successfully to drawing up and carrying out the premodifying standard of tooth profile and axial profile of the transmission gear of Dong Feng Motor Corporatio…

11. 实验验证了本文齿面误差修正模型及提出的TSVD法求解的正确性,提高螺旋锥齿轮齿面加工质量。

The error correction model of tooth surface and solving method using TSVD were verified experimentally, and the tooth surface machining quality of spiral bevel gear was improved.

12. 介绍了使用坐标法测量弧齿锥齿轮,并进行数据处理,以便对齿轮的加工参数进行修正的思路和方法。

This paper introduce a method of measuring spiral gear in coordinate system and deal with the data. The result of measurement can right guidance the machine"s parameter.

13. 介绍了使用坐标法测量弧齿锥齿轮,并进行数据处理,以便对齿轮的加工参数进行修正的思路和方法。

This paper introduce a method of measuring spiral gear in coordinate system and deal with the data. The result of measurement can right guidance the machine"s parameter.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!