等参有限元用英语怎么说,等参有限元的英文翻译


词语导航

基本信息

词语:等参有限元

繁体:等參有限元

拼音:děng cān yǒu xiàn yuán

英语翻译

【计】 isoparametric finite element

分词翻译

等的英语翻译:

class; grade; rank; wait; when
【机】 iso-

参的英语翻译:

join; refer

有限元的英语翻译:

【计】 finite element

翻译例句

1. 本文根据几何非线性有限元理论,提出张力膜结构初始形态分析的8结点曲面四边形等参单元。

Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.

2. 由于等参元不存在逆变换的显式,所以在有限元分析的列式中都回避等参元逆变换。

There is no explicit formulation of inverse mapping about the isoparametric element, so inverse mapping is avoided in finite element analysis.

3. 针对功能梯度材料这种新型材料,提出了采用等参梯度元建立有限元模型的方法。

By comparing the numerical solutions with the analytical solutions, it is proved that the isoparametric graded finite elements are useful.

4. 根据几何非线性有限元理论,提出张力膜结构初始形态分析的8结点曲面四边形等参单元。

Based on geometrical nonlinear finite element theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.

5. 采用非线性等参元三维有限元算法(FEM)成功地模拟了形状复杂的零件淬火过程中瞬态温度场、相变、应力和应变,获得直观的立体图象。

Three dimensional nonlinear and isoparameter FEM has been successfully used to simulate the transient temperature field, phase transformation, stress and strain of complex components during quenching.

6. 针对功能梯度材料这种新型材料,提出了采用等参梯度元建立有限元模型的方法。

Functional graded material is a new material. Isoparametric graded finite elements are used for building the corresponding model for functional graded material in this paper.

7. 本文根据几何非线性有限元理论,提出张力膜结构初始形态分析的8结点曲面四边形等参单元。

Based on geometrical nonlinear finite element theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.

8. 采用八节点的等参单元在空间上进行离散,建立了便于敏度分析的非线性正演和反演的有限元模型,可直接求导进行敏度分析。

The eight-point finite element is used for the discretization in the space system. The finite element model is given, facilitating to sensitivity analysis for non-linear direct and inverse problems.

9. 本文对土体采用邓肯-张非线性弹性模型编制了四节点等参元有限元程序ddkepl。

In this paper, four-nodal isoparametric element program DDKEPL by using Duncan"s nonlinear-elastic model for soil is presented.

10. 根据几何非线性有限元理论,提出张力膜结构初始形态分析的8结点曲面四边形等参单元。WWW.WeNTIYi.COm

Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.

11. 根据几何非线性有限元理论,提出张力膜结构初始形态分析的8结点曲面四边形等参单元。

Based on geometrical nonlinear finite element theory, a curved quadrilateral isoperimetric element with8 nodes for initial form analysis of tensile membrane structures is presented.

12. 利用组合杂交有限元法得到了一个四节点轴对称元,并采用协调等参双线性位移来逼近及分片常数应力模式。

A 4-node axisymmetric solid element is derived by combined hybrid methods. Compatible isoparametric bilinear displacement approximations and the constant stress mode are employed.

13. 本文根据几何非线性有限元理论,采用8结点曲面四边形等参单元,编制了用于张力膜结构内力分析的有限元程序。

Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.

14. 本文根据几何非线性有限元理论,采用8结点曲面四边形等参单元,编制了用于张力膜结构内力分析的有限元程序。

The internal forces in tensile membrane structures were analyzed using geometrical nonlinear finite element theory using curved quadrilateral isoperimetric 8 node elements.

15. 本文以双标量位法计算三维恒定磁场为理论基础,引入等参元有限元法。

In this paper, the isoparametric elements method based on the theoretical foundation of using two scalar potentials to calculate 3d magnetostatic field is introduced.

16. 方法有限元分析中采用了1223个节点、764个八节点六面体等参元和3564个自由度。

Methods 1223 nodes, 764 8-node hexahedron isoparametric elements and 3564 freedom degrees were used in FEM analysis.

17. 方法有限元分析中采用了1223个节点、764个八节点六面体等参元和3564个自由度。

Methods 1223 nodes, 764 8-node hexahedron isoparametric elements and 3564 freedom degrees were used in FEM analysis.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!