局部过热用英语怎么说,局部过热的英文翻译


词语导航

基本信息

词语:局部过热

繁体:局部過熱

拼音:jú bù guò rè

英语翻译

【化】 local overheating

分词翻译

局部的英语翻译:

part
【计】 L; LOC
【医】 mero-; topo-

过热的英语翻译:

【化】 hyperthermia; superheating

翻译例句

1. 该模型的建立对研究大型水轮发电机端部区域局部过热具有重要意义。

The model has great significance in studying the local over-heating in the end region of large hydrogenerators.

2. 指出冷轧工作辊早期失效主要形式为剥落,其原因为局部过热和过载。

It is indicated that the early main failure forms of cold work roll is spalling caused by local overheat and overload.

3. 当丹尼决定进入高中的校长拖累,他被迫寻求他父亲的帮助下局部过热。

When Danny decides to enter the NHRA High School Drags, he"s forced to seek his father"s help in taking down the local hot shot.

4. 不要把瓶子放在微波炉里,它会导致奶的局部过热而可能烫伤你的宝宝。

Don"t put the bottle in the microwave; it can create hot spots that could burn your baby"s mouth.

5. 分析了防热结构的局部过热现象,提出了一种局部防热结构设计分析方法。Www.weNtIYi.COM

The design analysis, tests and flight results of a local thermal-protection structure are introduced.

6. 直流偏磁会导致变压器噪音增大、振动加剧,可能引起变压器局部过热甚至损坏。

DC biasing can cause transformers noise increasing, vibration intensified, local overheating and even damaged.

7. 对回收式返回器的分析结果表明,表面的突起物是防热结构局部过热的重要起因。

An analysis of returned overheated structure is conducted. The results showed that outstanding objects are one of the most important causes leading structure to local overheating.

8. 分析了因变压器套管穿芯引线设计及安装不合理导致的导电回路局部过热性故障,提出了防范措施。

The conductive loop partial overheat fault caused by improper design and installation of the through lead wire in transformer bushing is analyzed. The preventive measures are presented.

9. 红外瞄准镜环境温度冲击和不合理的温度变化将会诱发一系列的控制电路问题,如呈现局部过热,引起芯片结区烧毁;

Infrared Sight and unreasonable impact on the ambient temperature the temperature change will induce a series of control circuits such as rendering local overheating causing chip junction area burned;

10. 为解决企业信息分布式存储中因局部访问过热而导致的一系列问题,提出了新型的分布式存储热点处理策略。

In order to deal with the local hotspot caused by extreme access in enterprise information distributed storage, a novel distributed storage hotspot treatment strategy was presented.

11. 高负荷运行下的焦化加热炉,由于局部炉管过热引起管内结焦是一个普遍性的问题。

Under the heavy duty operation, the internal coking of tube caused by local tube over heating is an universal problems for delayed coking furnace.

12. 这些现象主要包括辊身所产生的局部缺陷,以及过热导致的划伤、热裂,和轧制宽度内两边缘的压力裂纹。

These are local indentations on the roll barrel combined with heat-induced bruises, firecracks and pressure cracks within or outside the rolling width.

13. 这种不均衡引致了金融支持的不均衡,致使局部“过热”地区偏向“泡沫”化,并在整体上掩盖了局部泡沫的存在。

This imbalance led to the financial support of non-balanced, with the result that "overheating" regional bias "bubble", as well as a whole to cover up the existence of local bubbles.

14. 严重的碳化物带状偏析,使拉刀产生局部淬火过热和回火不足,造成内应力急剧增高,最终导致拉刀断裂。

It was found that the broach was locally overheated due to band segregation of carbide, and under-tempered. These factors caused fracture of broach as a result of high internal stress.

15. 高负荷运行下的焦化加热炉,由局部炉管过热引起管内结焦是一个普遍性的问题。

Under the condition of operating the high load furnace, coking inside the tube caused by local over temperature is a universal fault.

16. 高负荷运行下的焦化加热炉,由局部炉管过热引起管内结焦是一个普遍性的问题。

Under the condition of operating the high load furnace, coking inside the tube caused by local over temperature is a universal fault.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!