部件规格用英语怎么说,部件规格的英文翻译


词语导航

基本信息

词语:部件规格

繁体:部件規格

拼音:bù jiàn guī gé

英语翻译

【化】 component specification

分词翻译

部件的英语翻译:

assembly; components; parts; subassembly; unit
【计】 E; packing unit; U
【化】 element
【经】 part; parts

规格的英语翻译:

norms; spec.; specification; specs; standard; standards
【计】 etalon
【化】 specification
【医】 norm; qualification; specification; standard

翻译例句

1. 棉纺织的纤维检验是确定纺纱机工艺部件规格、结构以及纺纱工艺设计的依据,对成纱的产品质量影响较大。

The proof test of cotton fibre is the foundation for determining the specifications and the structure of spinning machine"s components, and is also the base of spin technics designing.

2. 如果被集成的部件不能被移动,则很难升级产品规格,而且高度集成的主板经常需要非标准机箱。

If the integrated parts can not be mobile, it will be difficult to upgrade product specifications, and highly integrated motherboard often requires non-standard chassis.

3. 同样道理,并不是所有用户都需要的部件,如网络设备或SCSI,则通常按照基本规格留在主板上,以降低成本。

Similarly, not all users need the parts, such as network devices or SCSI, is usually to remain in accordance with the basic specifications of the motherboard in order to reduce costs.

4. 因此,为了便于更换,系统中那些规格变化较快的部件——RAM、CPU和图形设备——往往依然安装在插座或插槽上。

Therefore, in order to facilitate the replacement of the system specification changes in those parts faster - RAM, CPU and graphics equipment - often still installed in the socket or slot.

5. 几乎任何厂商都可以将一堆更加强大或者高规格的部件组成一部平板,但是如果你不找到一种取悦普通消费者的方式,集世界之力也救不了你。

Almost any company could put together a more powerful or spec-heavy tablet, but all the horsepower in the world can"t help you if you don"t find a way to delight the average consumer.

6. 我确实也考虑过,也查看过这种配置的规格,零部件,和成本等等,但是我很快得出结论这种配置不行。

I did actually consider it, in as much as reviewing the specifications, the components, the cost, and so on, but I quickly came to the conclusion that is simply wasn"t adequate.

7. 所有部件都按照规格予以加工的。

All the parts were machined to the specification.

8. 过去经常有人援引机器部件的数据和规格来说明这家工厂产品的优劣。

Data and specifications for the machine parts were often cited to demonstrate the merits and demerits of the factory"s products.WWW.WEntiYI.Com

9. 乐普科保留采用相同或更高规格的部件替代已使用部件的权利。

LPKF reserves the right to substitute the components used with components of an equal or higher specification.

10. 我们传送带式零件清洗机具有灵活的设计和高规格部件,能够长期使用。

Our conveyor belt parts washers have flexible designs and heavy duty components for enduring service to your facility.

11. 产品的线圈为易损部件,可以单独订货,按照表4写明线圈电压规格代号及数量。

The coil is vulnerable component, can separate order, table 4 states coil voltage specifications code and the number.

12. 用符合合同规定规格、质量和性能的部件替换有瑕疵部件,并承担买方所蒙受的一切直接损失和费用。

Replaces defective components with those of components which conform to this Contract in the aspects of specification, quality and performance and bears all direct loss and expenses incurred to Buyer.

13. 乙方接受甲方在具体技术要求、数量和规格上的修改,特殊要求的部件,甲方以书面文件(图纸)为准;

Party B to accept the specific technical requirements, quantity and specifications on changes to the special requirements of the components, Party A written document (drawings) shall prevail;

14. 该系统应是一套功能完全可正常运转的完整设备,甚至包括规格没有提到的每个详细构件或特殊部件和特殊之处。

The system should be a set of complete equipments which can work normally, even including every minute component or special part and particular part.

15. 它是指通过标准化的工业流程,修复现有零部件(旧件),令其达到特定技术规格或标准。

It is restored from an existing part (CORE), using standardized industrial processes in line with specific technical specifications.

16. 普通的布局绘图以及根据顾客提出的技术规格绘制电机及部件产品的3d&2D模型。

Creating general arrangement drawings and 3D&2D models of motor&actuator products based on customers" written technical specifications.

17. 机械加工各种规格磨盘零部件,欢迎来图来样。

Machining precision metal parts for abrasive discs, according to supplied drawings or samples.

18. 主要生产大理石挂件,不锈钢冲压件,以及各种标准﹑规格﹑材质的平垫圈﹑弹簧垫圈﹑冲压件﹑螺栓﹑螺母等机械零部件。

We mainly produce the marble accessories, stainless steel stampings, and flat washers, spring washers, stampings, bolts, nuts and mechanical parts in all kinds of standard, specification and material.

19. 传统的浮点乘加部件采用“乘法-加法-规格化-舍入”的结构。

The structure of traditional FMAF is "multiply - add - normalize - round".

20. 操动机构结构简单、动作可靠,不同规格产品的零部件通用性强。

The operating mechanism has a simple structure with reliable operation. Parts of products with different specifications can have the strong popularity.

21. 是各类高档大规格数控镗铣床的理想配套功能部件,主轴垂直安装,直接与机床床身连接作机床工作台使用,即用作主机的第四回转轴。

SKT16 series NC rotary table, suitable for vertical use, is a perfect accessory for NC miller and machining center as an additional axis of main machine.

22. 我厂设备先进,技术力量雄厚。主要生产各种规格工业羊毛毡、民用羊毛毡、毡制零部件及皮毛制品。

Many kinds of felts including of industrial woolen felt, and civil woolen felt and products of woolen felt are made by advanced equipments and with process technology.

23. 我厂设备先进,技术力量雄厚。主要生产各种规格工业羊毛毡、民用羊毛毡、毡制零部件及皮毛制品。

Many kinds of felts including of industrial woolen felt, and civil woolen felt and products of woolen felt are made by advanced equipments and with process technology.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!