焊接热循环用英语怎么说,焊接热循环的英文翻译


词语导航

基本信息

词语:焊接热循环

繁体:焊接熱循環

拼音:hàn jiē rè xún huán

英语翻译

【化】 weld thermal cycle

分词翻译

焊接的英语翻译:

seal; solder; weld
【医】 solder; soldering

热循环的英语翻译:

【机】 heat cycle; thermal cycle

翻译例句

1. 焊接热循环对焊接接头的性能影响至关重要。Www.WeNtIyI.COm

Thermal cycle is an important parameter to influence the mechanical properties of the welded joint.

2. 焊接热循环的峰值温度随焊接速度的增大而降低。

The peak temperature of the thermal cycle reduces with the increase of welding speed.

3. 本文是自然科学基金项目“焊接热循环的计算机动态测试与计算”的一个子课题。

This dissertation is one of the sub-problems of "Computer Dynamic Test and Calculation of Welding Heat-cycle", which is a project on natural science fund.

4. 分析了在不同焊接热循环条件下相应的部分易淬火钢焊缝及热影响区的显微组织。

The microstructures of weld metal and HAZ under different thermal cycle are analyzed correspondingly.

5. 采用热模拟技术研究了X80管线钢在不同焊接热循环条件下晶粒及第二相粒子的变化。

Thermal simulating technology was adopted to study grain size and the precipitates distribution of CGHAZ for X80 pipeline steel with different welding condition.

6. 通过钨极氩弧焊试验,对焊接热影响区温度场进行分析和研究,建立了焊接热循环曲线。

The temperature field in welding HAZ was studied and analyzed. Welding heat curve was set up by argon-shielded tungsten arc welding experiment.

7. 结果表明:在不同的焊接热循环条件下,焊接粗晶区组织主要是板条贝氏体和粒状贝氏体。

The result show that the microstructure formed after thermal cycle was mainly lath bainite and granular bainite in CGHAZ .

8. 采用焊接热模拟试验和冲击试验,研究了X80管线钢焊接热循环对粗晶区组织性能的影响。

The influence of welding thermal cycle on structure and properties in grain-coarsening region of X80 pipeline steel was investigated by weld thermal simulation technique and the charpy test.

9. 采用tig焊接方法焊接AZ 91 d镁合金,考察了焊接热循环对镁合金的硬度的影响。

AZ91D magnesium alloy was welded using TIG method, and the influence of welding thermal cycling on the hardness of AZ91D alloy was studied.

10. 采用计算机软、硬件技术和数据处理方法,研究和开发了一种新型焊接热循环测试与分析系统。

A new type of computer-aided testing and analyzing system for welding thermal cycle is presented in this paper. The system adopts computer technology and data processing methods.

11. 对采用硅酸铝保温的淬硬倾向大的低合金高强度钢的焊接区域不同部位的焊接热循环进行了研究。

The investigation into the thermal cycles at different zones of a weld on HSLA steel with hardened tendency with aluminium silicate as thermal insulator are carried out completely.

12. 采用模拟焊接热循环的方法,研究了二次热循环对X80级管线钢焊接热影响区组织和性能的影响。

Welding thermal simulation technique is adopted to study the influences of twice thermal cycle on the structure and properties of X80 pipeline steel.

13. 为了验证薄板焊接温度场数值模拟的正确性,应用虚拟仪器技术设计了一套焊接热循环动态检测系统。

The software for welding heat cycle was developed successfully, based on some classical mathematic models and measured data and programmed appropriately by LabVIEW7.

14. 采用焊道错位叠加方法,再现了螺旋管双面埋弧焊制管过程中内、外焊焊接热影响区(HAZ)的焊接热循环。

In this paper the HAZ weld thermal cycles of the welding by both sides submerged arc welded steel pipe were reproduced by the dislocation overlap weld method.

15. 实验表明,焊缝几何尺寸和焊接热循环的计算值和实测值吻合良好,这一方法可用于焊缝几何尺寸的预测和控制。

The experiments show that the predicted weld dimensions are in agreement with the measured ones, and the geometry sizes of the weld can be predicted and controlled by this way.

16. 采用模拟时的焊接工艺参数进行钨极氩弧焊平板对接焊,测定焊接热循环曲线和焊缝截面尺寸,对模拟结果加以验证。

The welding thermal cycle and section dimensions of the welding seam were measured in the condition of the simulated welding process parameters for checking simulation results.

17. 采用焊接热模拟试验方法研究了在焊接热循环和应力-应变循环同时作用下,2090铝锂合金焊接热影响区显微组织和力学性能的变化特征。

The variation of microstructure and mechanical properties of the welding heat-affected zone of 2090 Al-Li alloy were investigated by means of the welding thermal, simulated and strain cycles test.

18. 采用热模拟技术研究了二次热循环对X80级管线钢焊接粗晶区性能的影响。

To study quadratic heat circulation to the effect of welding wide crystal area performance of X80 pipeline steel by adopting thermal simulation technology.

19. 作为非接触测温的红外测温技术,能够真实地反映出焊件在焊接工艺中的温度随时间变化的热循环过程。

The infrared measuring temperature technique as non-contact measuring temperature method can reflect the heat cycle process of the temperature change along with time of the weldment.

20. 应用有限元方法建立了白口铸铁焊接接头焊补温度场的数学模型,对白口铸铁焊补温度场和热循环进行了分析。

Using the finite element method, a mathematical model of temperature field for weld-repaired zone of white cast iron is constructed, and temperature field and heat cycle are analyzed.

21. 本文还研究了焊接工艺参数和二次热循环峰值温度对实验钢x 80组织性能的影响规律。

The influences of welding process parameter and twice thermal cycle on the microstructure and properties of X80 pipeline steel are also investigated in this paper.

22. 采用焊接热模拟、电化学测试、扫描电镜、X射线衍射等方法研究了热循环对喷瓷管道瓷层耐蚀性的影响。

The influence of thermal cycles on the enamel coating corrosion resistance was investigated by Weld Thermal Simulation, Electro chemical Technique, SEM and XRD.

23. 本文给出了各自的焊接温度场演变历程和各焊缝及其附近热循环曲线,并定量分析了其焊接温度场分布规律。

In this paper, their temperature evolutions and thermal cycles nearby welding beads were given, and the temperature field distributions were quantificationally analyzed.

24. 采用真空热循环试验装置,模拟近地轨道空间环境,研究了LF 6铝合金焊接接头拉伸性能和微观组织,分析讨论了真空热循环对焊接接头的影响规律。

The tensile properties and microstructure of LF6 aluminum alloy weld joint under simulating near earth space environment are studied by means of vacuum thermal cycling system.

25. 结果表明,一定时间的热循环会造成LF6铝合金焊接接头断裂机理的改变,由未经热循环时的纯剪切型断裂,逐渐过渡成微孔聚集型断裂。

The results show a certain time thermal cycle can cause the fracture mechanism change. It varies from original pure shear fracture to microvoid coalescence fracture gradually.

26. 结果表明,一定时间的热循环会造成LF6铝合金焊接接头断裂机理的改变,由未经热循环时的纯剪切型断裂,逐渐过渡成微孔聚集型断裂。

The results show a certain time thermal cycle can cause the fracture mechanism change. It varies from original pure shear fracture to microvoid coalescence fracture gradually.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!