容错设计用英语怎么说,容错设计的英文翻译


词语导航

基本信息

词语:容错设计

繁体:容錯設計

拼音:róng cuò shè jì

英语翻译

【计】 fault-tolerant design

分词翻译

容错的英语翻译:

【计】 fault toleranceWWW.wENtIyI.coM

设计的英语翻译:

design; devise; contrive; project; engineer; frame; plan; programming; scheme
【化】 design
【医】 project
【经】 projection

翻译例句

1. 容错设计针对可靠性设计。

Fault tolerance countermeasures are designed to combat design reliability.

2. 容错设计是提高计算机系统可靠性的有效手段。

Fault-tolerant design is an effective method to improve the reliability of computer systems.

3. 本文介绍智能热值测量系统中测控软件的容错设计,从而提高了系统的容错性。

This paper introduces the to tolerance design for the measuring and control software of the intelligent calorific value measuring system.

4. 介绍了先进飞机供电系统及其控制系统的组成,并对数据通信总线的容错设计进行论述。

Advanced aircraft power system and its control system was introduced and fault tolerant design of data bus was discussed.

5. 它们对于计算机网络中网络服务器、主机和通信节点机的容错设计都具有良好的参考价值。

These typical computer systems are valuable for the fault tolerant design of network servers, host computers, and communication node computers for computer networks.

6. 本文介绍了某型无人驾驶飞机系列MCS - 51单片机控制系统的软件容错设计方法与实现。

This paper presents a fault-tolerant software design method and its application to the micro-controller system (MCS-51) of a type of Pilotless aircraft.

7. 系统分析了容错设计的需求,提出了铁路计轴计算机系统的可靠性要求,对容错类型进行了定位。

The paper makes an analysis of the needs of the fault-tolerance design, suggesting the reliability requirements in the railway axis-counting computer and positioned the fault-tolerance category.

8. 同时针对软件的可靠性问题,论文提出了具体措施来实现软件的避错、容错设计,保证其高可靠性。

At the same time, for software reliability problems, the paper puts forward specific measures to achieve fault-avoidance and fault-tolerant design, ensuring high reliability.

9. 本文主要研究了利用中间件TUXEDO技术以及该技术在联机事务处理应用软件中的容错设计方法。

This paper introduces how to apply middleware of TUXEDO, and illustrates fault tolerant design in online transaction processing software using it.

10. 较全面地分析了网络系统中的容错设计的问题,提出了一系列有效提高系统容错能力的硬件措施与软件措施。

The faulttolerance design in network system is analyzed thoroughly, and a series of efficient measures for promoting the faulttolerance ability in hardware and software are presented.

11. 本设计基本实现了所要达到的目标,结构比较简单,基本的容错设计也大概地实现,其效果还是满足要求的。

This design is realized the goal. It is not complex, every functions link compact, the essential tolerant designs is realized, and this system basically met needs.

12. 分布式异构三取二安全控制单元以传统三取二安全计算机为基础,采用容错设计,具有高安全性,高可靠性的特点。

Distributed heterogeneous TMR (Triple Modular Redundancy) safety control unit, which is based on traditional TMR safety computer, has the character of high security and high reliability.

13. 容错设计和负载平衡算法的研究保证了实时分布式系统的高可靠性? 高可用性以及实时性的要求,具有广泛的应用前景?。

The design of Fault tolerance and the study of load balance guarantees the system"s high-reliability, high-usability and real time"s requirement, and has extensive application prospect.

14. 阀值错误严重级别——定义错误严重级别阈值,并在服务编排中根据这些阈值设计容错级别。

Threshold error severity levels - Identify threshold error severity levels and design fault tolerance levels in service orchestration around these thresholds.

15. 它专门设计用于改善服务器选择、负载优化和容错。

It is designed to improve server selection, load optimization, and fault tolerance.

16. RAID的容错功能设计用于避免由偶发的驱动器故障所产生的负面影响。

The fault-tolerant features of RAID are designed to protect you from the negative impacts of a spontaneous complete drive failure.

17. 设计合理的容错机制以维持流程中的ACID(原子性、一致性、隔离性和持久性)特性是设计soa解决方案的一大挑战。

Designing appropriate fault tolerant mechanisms to maintaining ACID (Atomicity, Consistency, Isolation and Durability) properties in process flows poses a big challenge in designing SOA solutions.

18. 因为Internet最初的设计就能够支持一个高水平的容错,企业可以使用云消除单点故障。

Because the Internet was originally designed to enable a high degree of fault tolerance, companies can eliminate single points of failure by using the cloud.

19. 我们的目标是设计一个分布式系统,具有之前提到的特性(容错、高可用性、可恢复性等),那样就意味着我们必须针对故障的情况进行设计。

Our goal is to design a distributed system with the characteristics listed above (fault-tolerant, highly available, recoverable, etc.), which means we must design for failure.

20. 不可预期的设计问题会不断出现,因为软件的容错能力很低—比物理系统低很多。

Unexpected design issues arise constantly because software has low failure tolerances - much lower than physical systems.

21. 它是特别为构建跨网络部署的容错、实时系统而设计的。

It was designed especially for building fault-tolerant, real-time systems that can be deployed across a network.

22. 管理树是一些管理者和工作者的分层排布代码。它使得设计和编写容错软件成为可能。

The supervision tree is a hierarchical arrangement of code into supervisors and workers, making it possible to design and program fault-tolerant software.

23. 文中用作者提出的通用前馈网络和排序学习算法,提出了一种设计具有期望容错域的前向掩蔽联想记忆模型的方法。

A design method of ahead masking associative memory model with expecting fault-tolerant field is proposed by use of the general feed-forward network and sequential learning algorithm given by authors.

24. 提出了一种新的冗余容错电路设计方法。

A new design method of redundant fault-tolerant circuits was proposed.

25. 对于工作在恶劣环境下的机器人,容错是一个重要的设计准则。

Fault tolerance is an important design criterion for robots working in harsh environment.

26. 覆盖率是容错系统设计和评估中的重要概念。

Coverage is an important concept in fault tolerant systems design and evaluation.

27. 对具有不确定参数的连续控制系统,针对传感器失效,研究了鲁棒容错控制器的设计问题。

A design method of robust fault tolerance for uncertain linear systems with sensor failures is discussed in this paper.

28. 在可靠性设计中采用容错技术、避错技术与诊断技术相结合、硬件措施与软件措施相结合的方法。

In the design of reliability, the method, that fault tolerance techniques are combined with fault avoidance and diagnosis ones, and hardware measures are combined with software ones, is adopted.

29. 保证管道运行工况平稳,给出了执行器故障时容错控制器的设计方法。

When actuator is in trouble, we give a design method of fault tolerant controller for pipeline"s normally running.

30. 保证管道运行工况平稳,给出了执行器故障时容错控制器的设计方法。

When actuator is in trouble, we give a design method of fault tolerant controller for pipeline"s normally running.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!