空蚀用英语怎么说,空蚀的英文翻译


词语导航

基本信息

词语:空蚀

繁体:空蝕

拼音:kōng shí

英语翻译

【化】 cavitation; cavitation damage; cavitation erosion; impingement attack

分词翻译

空的英语翻译:

empty; hollow; air; for nothing; vacancy
【计】 empty; null
【医】 keno-
【经】 for nothing

蚀的英语翻译:

corrode; erode; lose

翻译例句

1. 明流反弧段是容易发生空蚀的部位。

The place downstream of bucket in an open channel is easily subject to cavitation damages.

2. 漩涡空化一直是空化空蚀研究中的一个重要问题。

Vortex cavitation has been an important problem in cavitation researches.

3. 在深井中,边界条件发生了变化,可以推测空蚀存在。

In deep silo, that the cavitation corrosion exists could be deduced as the boundary conditions changed.

4. 磨损、空蚀是农机具及泵装置使用中安全可靠性的主要问题。

Wear and cavitations are major problems affecting safe operation in using agricultural machinery and pump.

5. 然而,在全尺寸的水轮机上直接用肉眼观察空蚀几乎是不可能的。

However, it is impossible to obverse the whole size turbine directly by naked eyes.

6. 通过设置掺气设施,大多数龙抬头泄洪洞都较好地防止了空蚀破坏。

The cavitation damage is prevented effectively in many spillway dragon-raise-head tunnels by aeration facility.

7. 介绍新型旋转水流式空蚀试验装置的原理及使用该装置的试验成果。

The theory and experimental results of a new rotating-flow test device for cavitation damage are introduced.wwW.wentiyi.com

8. 试验和理论分析表明,水流的初生空化和空蚀可以利用常压水洞来模拟。

Experiment and theory analysis shows that the inception cavitation and developed cavitation can be simulated by hydraulic tunnel device in laboratory.

9. 公伯峡旋流泄洪洞的这些关键部位的空化空蚀特性尚需进一步观测和检验。

The key parts of the cavitation characteristics of Gongboxia rotary flow tunnel still need further observation and testing.

10. 本文简要地介绍了应用离子束注入技术改善水力机械金属材料的抗空蚀能力。

To improve the cavitation resistance of metal materials for hydraulic machinery the use of an ion - beam implantation technique is briefly presented in this paper.

11. 空蚀是水轮机运行中最为常见的故障之一,严重时,它直接危及到机组的安全运行。

Cavitation is one of the most common faults of hydropower units, and serious cavitation will endanger units "operation directly.

12. 迄今为止,凡在清水条件下水轮机安装高程都是以限制空蚀条件的空化数来确定的。

UP to now, the setting height of the turbine in clear water has been determined by the cavitation number which limits the cavitation conditions.

13. 高水头、大流量泄洪洞内高速水流问题主要问题之一是水流空化引起过流表面空蚀。

One of the main problems of spillway tunnel with large discharge and high velocity flow is the cavitation damage.

14. 满拉水电站水比机组经常处在低负荷下运行,存在着局部空蚀破坏和运行不稳定两大问题。

The hydraulic turbine unit frequently operates under the low water head, exists the questions of unstable operation and cavitation in Mania hydropower station.

15. 基于两相流体动力学的理论,建立空蚀射流切割装置中短管内的压力变化梯度的基本方程式;

Based on the theory of two-phase flow, the equation of the pressure gradient is found for the short pipe in cavitation jet cutting set.

16. 同时,该式亦可用于对台阶溢流坝坝面最大流速进行估计,以便判别坝面出现空蚀破坏的可能性。

The calculations are also useful to estimate the maximum velocity of overflow surface that can be use to judge the possibilities of cavitation damage at the stepped overflow surface.

17. 泄洪洞抗冲耐磨混凝土施工及质量控制的成功,为减小泄洪洞过流面空蚀和抗冲耐磨提供了保障。

The successful concrete construction and quality control provides guarantees on reducing surface cavitation and increasing abrasion-resistance capacity.

18. 最后,结合工程实例的实验结果,说明了发生空蚀破坏的主要原因是不平整度以及体型的不合理。

Finally, the main reasons which are the surface irregularities and the reasonability of construction shape are shown by the experiment results of engineering example.

19. 并对激光熔覆层结构及性能作了较详细的介绍,阐述了熔覆层的抗空蚀性、耐磨蚀性和耐腐蚀性等。

The effects of cavitation erosion resistance, abra - sion resistance and corrosion resistance of the cladding layer are reviewed.

20. 小湾水电站泄洪洞在泄洪时具有高水头、高流速、泄量大的特点,对混凝土冲刷力强,容易产生空蚀破坏。

As the high head, high velocity and large flow of flood discharge, the concrete of spillway tunnel in Xiaowan Hydropower Station is easy to be damaged by cavitation.

21. 某些水泵使用1000小时左右即出现严重的空蚀,船舶螺旋桨在使用一段时间后也因空蚀而效率大大降低。

Some pumps used for 1000 hours, the ship propeller in the use of time is also greatly reduced because of the efficiency of air piping.

22. 综述了国内外不锈钢抗空蚀激光表面熔覆技术的研究现状,介绍了该技术的特点,设备和抗空蚀熔覆粉末体系。

The anti-cavitation laser cladding technique for the surface of stainless steel is reviewed. The equipments, deposition process and laser cladding powder are introduced.

23. 对柱塞泵设计过程中的空蚀特性,提出一种通过分析减压槽出口处的射流方向来评价高压轴向柱塞空蚀特性的方法;

The method to estimate cavitation characteristic by analyzing impingement angle at the groove on porting plate of an axial plunger pump is put forward during design process period.

24. 由于各种原因产生的高频和低频的压力脉动会使尾水管内部产生严重的空蚀破坏或者诱发水轮机叶片产生振动等问题。

Pressure fluctuations with high or low frequency can lead to acute cavitation damage in draft tubes or vibration of the vane of turbine.

25. 无水氨汽提塔喷嘴在高速蒸汽产生的空蚀和介质的活化腐蚀联合作用下腐蚀严重,通过材质、结构优化取得了良好的效果。

By the joint action of cavitation corrosion produced in the high speed stream and medium activation corrosion, the spray nozzles of anhydrous ammonia stripper corrode seriously.

26. 无水氨汽提塔喷嘴在高速蒸汽产生的空蚀和介质的活化腐蚀联合作用下腐蚀严重,通过材质、结构优化取得了良好的效果。

By the joint action of cavitation corrosion produced in the high speed stream and medium activation corrosion, the spray nozzles of anhydrous ammonia stripper corrode seriously.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!