固体聚合用英语怎么说,固体聚合的英文翻译


词语导航

基本信息

词语:固体聚合

繁体:固體聚合

拼音:gù tǐ jù hé

英语翻译

【化】 solid polymerization

分词翻译

固体的英语翻译:

solid; solid body
【医】 solid; stereo-

聚合的英语翻译:

aggregation; converge; group; polymerization
【化】 polymerization
【医】 polymerism; polymerization; polymerize

翻译例句

1. 质子交换膜燃料电池采用全氟磺酸固体聚合物膜为电解质。

Proton exchange membrane fuel cells use a perfluorosulfonic solid polymer film as electrolyte.

2. 对阳极剥离型固体聚合物电解质CO2电化学传感器进行了研究。

A novel kind of solid polymer electrolyte electrochemical CO2 sensor by anodic stripping is studied.

3. 有必要探索由工业废铁粉经固相反应直接制取固体聚合硫酸铁的工艺。

It is necessary to research a new method of SPFS preparation by solid reaction process with industrial scrap iron powder.

4. 利用固体聚合物电解质(SPE)复合电极,将牛儿醇选择氧化为牛儿醛。

Solid Polymer Electrolyte (SPE) composite electrodes were utilized for the selective oxidation of geraniol alcohol to correspondent aldehyde.

5. 质子交换膜燃料电池采用固体聚合物膜为电解质,简化了电池的水和电解质管理;

Proton exchange membrane fuel cells use a perfluorosulfonic solid polymer film as electrolyte that simplifies management of water and electrolyte.

6. 水的生成与排出之间的平衡对于固体聚合物电解质燃料电池的成功运行特别重要。

The proper balance between water production and removal is particularly important for successfully operating solid-polymer-electrolyte fuel cells.

7. 具有要增湿的固体聚合物薄膜的燃料电池,燃料电池系统,以及用于燃料电池的增湿方法。

Fuel cell with solid polymer membrane to be moisturized, fuel cell system, and moisturizing method for fuel cell.

8. 本实验采用溶液浇铸法制备了PVA -KOH - H_2O基系列碱性固体聚合物电解质。

Alkaline solid polymer electrolyte films, which composed of PVA-KOH-H2O series, were synthesized by a solution cast technique.

9. 用于燃料电池的增强电解质膜,其制备方法,用于燃料电池的膜电极组件以及包含该组件的固体聚合物燃料电池。

Reinforced electrolyte membrane for fuel cell, method for producing the same, membrane-electrode assembly for fuel cell and solid polymer fuel cell comprising the same.

10. 为了找到合适的材料,Kiser博士建立了一个聚合混合物“图书馆”以寻找一种具有室温下是液体但体温下是固体的特有性质物质。

To find an appropriate material, Dr Kiser assembled a “library” of polymer mixtures and searched for one with the peculiar property of being liquid at room temperature, but solid at body temperature.

11. 然而,温度不是可以使聚合物从液体转变成固体并转变回来的唯一原因。

Temperature, however, is not the only thing that can cause this polymer to shift from liquid to solid and back.

12. 这是固体,是原子的聚合物。

This is solid state up here, aggregates of atoms.

13. 使用喷墨打印机的喷头将红外吸收墨水铺在聚合物乳胶粉层上,在红外线的热度下乳胶粉会被熔结成固体形状。

It USES inkjet print-heads to deposit infra-red-absorbing ink on layers of polymer powder which are fused into solid shapes with infra-red heating.

14. 原子聚合起来,形成气体、液体和固体。

Atoms join together to form gases, liquids and solids.

15. 一类固体或半固体的天然的或合成的有机材料,一般为无清晰熔点的高分子量材料,多数树脂为聚合物。

Any type of solid or semi solid organic material of natural or synthetic origin, generally of high molecular weight with no defined melting point. Most resins are polymers.

16. 这类聚合物能以各种形式存在,如固体、溶液或吸附于载体表面。

These polymers may be in various forms, such as in solution, on surface, or as solids.wWw.wENtiYi.cOm

17. 综述了聚合物固体电解质基体的设计原理、分类和研究进展,并对今后在聚合物基体设计方面的研究前景作了展望。

The design principle, the categories and the development of the solid polymer electrolyte matrix are reviewed here. And the study trends of the design polymer matrix are also prospected.

18. 介绍了聚合物锂离子蓄电池的主要性能特点,采用的聚合物固体电解质体系和市场前景。

The main performance, characteristics and the market prospect of polymer lithium ion batteries are introduced as well as the solid polymer electrolyte it adopted.

19. 介绍了用于聚合物锂二次电池的正极材料及固体聚电解质的一些最近报道。

This paper introduces some recent reports on cathode materials and solid polyelectrolyte used in polymer lithium secondary batteries.

20. 概述了聚合物刷子的最新进展情况,并着重介绍了固定于固体基体表面的线型聚合物刷子。

The recent development of polymer brushes with an emphasis on linear polymer brushes immobilized on the surface of solid substrate was reviewed.

21. 为改善流体的流动在流体中所使用的添加剂。减阻剂常由聚合物或树脂材料制成,这些材料在固体颗粒上形成光滑的表面。

An additive used in a fluid to improve its flow. Friction reducer are often made of polymer or resin material that forms a slick surface on solids.

22. 本实验采用环氧树脂、有机仲胺、聚酰胺和封闭异氰酸酯为主要原料,合成了固体分在70%的阳离子型环氧聚合物树脂;

An epoxy resin, an organic secondary amine, a polyamide and a blocked isocyanate are selected as main materials to synthesize polymer resin with solid content of 70%.

23. 固体钛催化剂组分、其制备方法,含有该组分的烯烃聚合催化剂,以及烯烃聚合方法。

Solid titanium catalyst component, process for preparing same, olefin polymerization catalyst containing same and olefine polymerization process.

24. 综述了聚合物固体在粉碎过程中形态和结构的变化及机械力化学效应。

The recent studies on the structural and morphological development of polymer solids during pulverization were reviewed.

25. 通常聚合物会被添加来增加固体截留(物质),溢流被再循环,浓缩污泥被抽取以用来进一步脱水和处置。

Polymer is normally added to enhance solids capture, overflow is recycled, and thickened sludge withdrawn for further dewatering and disposal.

26. 以聚丙烯酸钾为分散剂,悬浮聚合成固体丙烯酸树脂,并讨论了固体丙烯酸树脂的性能及合成过程中的影响因素。

Solid acrylic resin is synthesized by suspension polymerization with potassium polyacrylate dispersing agent. The factors influencing on the performances and preparation process are discussed.

27. 针对热塑性聚合物在锥形量热仪中燃烧测试时的熔融行为,提出了有限厚度的聚合物固体一维不稳态燃烧微分模型。

Based on the study of melting behavior of thermoplastic polymers tested in the cone calorimeter, a differential numerical model for one-dimensional unsteady burning of polymers was put forward.

28. 该反应器较好的解决了本体聚合反应中的传热,高粘性物料的出料和固体产物的出料等问题。

That reactor resolved the problem of transfering heat, taking out highly viscous material and solid outcome in bulk polymerization.

29. 该反应器较好的解决了本体聚合反应中的传热,高粘性物料的出料和固体产物的出料等问题。

That reactor resolved the problem of transfering heat, taking out highly viscous material and solid outcome in bulk polymerization.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!