
词语导航
基本信息
词语:致热的
繁体:致熱的
拼音:zhì rè de
英语翻译
【医】 febricant; febrifacient; febrific; pyrectic; pyretogenic; pyretogenouspyrogenic; pyrogenous
分词翻译
致的英语翻译:
deliver; devote; extend; cause; delicate; fine; incur; send热的英语翻译:
ardent; caloric; craze; eager; fever; heat; hot; warm【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-
翻译例句
1. 结合节流过程,从实验角度进一步分析了致冷和致热的物理原因。
Furthermore, the physical reasons of cooling and heating are analyzed on the basis of the Joule-Thomson experiment.
2. 微波加快化学反应速度除了微波对反应物的加热以外还有非致热的作用。
The acceleration of chemical reaction with the radiation of microwave is caused by not only the dielectric heating, but also the athermal action.
3. 目的研究内毒素对机体致热的规律,掌握不同剂量内毒素致热的热型和热限。
OBJECTIVE to understand fever pattern and limits, induced by endotoxin of different doses and study the fever regularity.
4. 动物们一致认为,没有热,他们的痛苦将永远没有尽头;现在最重要的事就是弄明白热是怎么消失的。
All the animals quickly agreed that the most important thing to do was to find out what had become of the heat, for without heat their sufferings would never end.wwW.wEnTIYi.coM
5. 人作为热感受主体,其自身热感觉标准不论是在室内还是室外都是一致的。
As a subject of thermal perception, people have a conformable standard of thermal sense for either indoor environment or outdoor.
6. 论述了风能致热系统的工作原理。
This paper reported the fundamental principles of wind turbine heating system.
7. 热致相分离法是一种制备聚合物微孔材料的有效方法。
Thermally induced phase separation (TIPS) process is an effective way of making microporous materials.
8. 主要涉及的内容包含每个设备部件的应力、疲劳、热棘轮、断裂力学分析和内部构件流致振动分析以及试验验证等。
The design mainly involves the analysis of the stress, fatigue, thermal ratchet and fracture mechanics, the analysis of flow-induced vibration of the internals and the test verification.
9. 通过对喷头温度和成形室温度的控制,实现了对材料的相变和热致相分离过程的控制。
Material phase change and thermally induced phase separation of materials are controlled by controlling the spray head and working chamber temperatures.
10. 目的探讨无热和微热功率的X波段脉冲微波孕期辐射致仔鼠脑功能发育障碍的神经电生理机制。
Objective To discuss the neuroelectrophysiological mechanism of damage of brain function development in offsprings of pregnant rats treated with X-band of microwave pulse.
11. 在无外加强制作用下实现里克管脉动工况数值模拟,与里克管作为自激热声装置的实际情况一致。
Numerical simulation results of Rijke tubes, pulsating without forced triggering, agree with actual conditions of Rijke tubes acting as self-excited thermal-sonic devices.
12. 在专案会议的第二次会议,首先,这里有两个主要问题,一个是致热原性的准备工作及可用性,它们的不稳定性。
At the second of these AD hoc conferences, as at the first, there were two chief problems the pyrogenicity of the preparations then available, and their instability.
13. 质量损失速率、各点温度以及产物一氧化碳浓度变化曲线均与热释放速率曲线的变化趋势保持一致。
The varying tendencies of mass loss rate, temperatures of each point, and CO concentration were all consistent with heat release rate.
14. 实验表明,产物的乙酰基含量受合成温度和反应时间影响,其热致液晶的相转变温度和温域随乙酰基含量变化。
The experimental results indicated that reaction temperature and time were influence on acetyl content of APC products. Liquid crystalline phase transition changed with acetyl content .
15. 用差示扫描量热法分析了6种作物幼苗线粒体极性脂和磷脂酰甘油(PG)的热致相变。
The thermal response of seedling mitochondria polar lipids and phosphatidylglycerols (PG) from 6 species of crops was investigated by differential scanning calorimetry.
16. 试验结果表明:电阻率曲线和水化热曲线变化趋势近似一致,可作为研究水化的一种新方法。
The result showed: resistivity curve and heat of hydration curve variation tendencies were approximate and unanimous, can be regarded as a kind of new method to study hydration.
17. 本课题针对在KX3132G型六轴数控滚齿机床加工过程中,工作台热致变形产生的X轴方向上的误差进行测量与补偿。
This subject is about thermal deformation error detection and compensation of an YKX3132G six axes CNC gear-hobber machine"s worktable in X axis direction.
18. 计算结果表明,脂肪酮燃烧热和生成热计算值与实验值的一致性令人满意。
The results calculated show that the predicted values of heat of combustion and heat of formation agree satisfactorily with the experimental values.
19. 本文研究了向列相液晶中热致相位光栅产生的简并四波混频过程。
The degenerate four-wave mixing process due to thermal phase grating in nematic liquid crystals is studied.
20. 特别地,热疗过程中组织的温升与热损伤均会引起血液灌注的变化,但涉及热致血液灌注变化的定量描述非常少见。
Particularly, both the rise of temperature and the thermal damage may cause the change of blood perfusion during in thermal therapy, meanwhile the quantified describe of the change was less seen.
21. 热函的顺序与稳定常数的顺序一致。
The sequence of enthalpy is consistent with that of stability constants.
22. 结果:影响图像质量的主要因素来自热鼓组件,热鼓表面致损原因是高温显像的同时产生气雾及结晶物。
Results: The main factors influencing image quality were hot drum components. The chief cause of impairment of drum surface was high temperature.
23. 本文中探讨了MBBA液晶中,由热致位相光栅产生的简并四波混频效应。
Degenerate four-wave mixing effect due to thermally induced index grating is studied in liquid crystal MBBA.
24. 综述了由增强性的热致液晶高聚物和热塑料聚合物基体组成的原位复合材料及其制备、构和性能。
In-situ composites, consisting of reinforcing thermotropic liquid crystal polymers and thermoplastic matrix, are reviewed together with their preparation, structure and properties.
25. 接头延伸率的改善同热影响区冷变形程度的减弱及焊缝强度、应力水平同母材趋于一致有很大关系。
Improvement of elongation of joint is related to weaker cool deformation degree of heat affect zone (HAZ) and uniformity of strength and stress level between weld and base metal.
26. 所有的共聚物均为向列型热致液晶高分子和具有较宽的液晶态温度范围;
The results show that the monomer has thermotropic, all the copolymers have nematic thermotropic liquid polymers and liquid crystal phase with broad temperature ranges.
27. 所以,TC既具有热致液晶的特性,又具有溶致液晶的特性。
It is shown that TC has the characteristic of thermotropic and lyotropic liquid crystals.
28. 指出了卡诺热泵的最佳泵热率与致热系数间的关系是没有实际意义的。
It points out that the relation between optimal heating rate and coefficient of performance of a Carnot heat pump is useless.
29. 评价了热致液晶高聚物作为高性能成型材料的特点。
Characteristics of thermotropic liquid crystal polymers used as high-performance moulded products are commented.
30. 评价了热致液晶高聚物作为高性能成型材料的特点。
Characteristics of thermotropic liquid crystal polymers used as high-performance moulded products are commented.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
