螺旋面用英语怎么说，螺旋面的英文翻译

词语导航

基本信息

词语：螺旋面

繁体：螺旋面

拼音：luó xuán miàn

英语翻译

helicoid

相关词条

1.helicoidalsurface  2.skewhelicoid  3.spiralsurface  4.helicalsurface  5.helicalconvolute  6.helicoidal  

分词翻译

螺旋的英语翻译：

helix; screw; spiral; spire; volution
【化】 helix
【医】 coil; coiling; helico-; screw; spiral; spiro-; tirefond

面的英语翻译：

face; surface; cover; directly; range; scale; side
【医】 face; facies; facio-; prosopo-; surface

翻译例句

1. 本机床是一种采用螺旋面原理磨削钻头的机床。

This machine adopts the principle of spiral face grinding, sharpening drills.

2. 论述螺旋面外铣、旋风铣两种情况刀具设计问题。

The problem of the design of the knife in milling helical face in and out is emphasized.

3. 意大利面、螺旋面、面条和千层面都是意大利面食。

Spaghetti, fusilli, noodles and lasagne sheets are all forms of pasta.

4. 给出螺旋面钻尖刃磨机床的基本结构及其工作原理。

Basic structure and operation principle of the parallel grinder for helical drill point grinding is presented.

5. 螺旋面大多数是用球头铣刀、侧铣刀、盘形刀具成形加工出来的。

The helicoidal surfaces are produced mostly by form cutting with forming cutters of end mill type, side mill type or disc type.

6. 本文详细研究了不同旋向楔横轧成形螺旋面在不同坐标下的方程。

The equations of different helix in cross wedge rolling in different coordinates were studied in this paper.

7. 分析螺旋面斜向扭转振动传动的原理和螺旋面上物料运动的规律。

This paper analyzed the movement theory of lean rotate Vibration of helical surface and the motion law of materials movement.

8. 圆柱螺旋面螺杆加工技术在水力、石油机械生产中占有重要地位。

Cylinder helical screw rod manufacturing technology plays an important role in the hydraulic and petroleum machinery.

9. 基于非共轴螺旋面钻尖的刃磨原理，建立了刃磨参数的数学模型。

Mathematical model for hyperboloid grinding of twist drill and relationships between drill design and grinding parameters are introduced.

10. 该程序一经调用，只要给出几个相关的参数，即可绘出变螺距螺旋面展开图。

Once the program is loaded, only a few parameters are given, the development drawings of variable pitch helical blade will be obtained.

11. 直线或螺旋面刀片，安装在搅拌器转轴上，通过剪切动作，能够彻底混合材料；

Straight or helical faced blades, mounted on agitator shaft, thoroughly mix material with shearing action;

12. 本文介绍由斜螺旋面和单叶双曲面组成的犁面在犁面主参数确定后的工程作图法。

It"s introduced in this paper how to draw the engineering drawing of the plow surface formed by a combination of a oblique helicoid and a hyperboloid of one sheet.

13. 针对不锈钢螺旋板的左旋螺旋面结构特点，分析了成形工艺，并介绍了成形模具结构。

According the laevorotatory helicoid structure characteristic of the stainless steel spiral plate, analyzed the forming process, and introduced forming die structure.

14. 弧面分度凸轮轮廓面为一空间不可展开螺旋面，传统的加工工艺很难满足其精度要求。

Since the profile of the globoidal indexing cam is a spiral surface, traditional machining technology couldn"t meet it"s accuracy demands.

15. 除选定滑动面为对数螺旋面—对数螺旋面—平面的形式外，没有其他任何的简化或假定。

Except that the selected sliding surface is formed by logarithmic helicoidal surface-logarithmic helicoidal surface-plane, no other simplifications or assumptions are made.

16. 在球坐标系中，建立了球形滚刀的各个螺旋面方程，推导了侧后角公式，并给出了计算实例。

The helical surface equations of the spherical hob are set up in spherical coordinates. The formulas of the side clearance angle and numerical examples are given.

17. 该谐振腔由一螺旋面反射镜和一球面反射镜构成，可充分提取激活区的能量并输出单束激光。

This resonator is composed of a helical reflecting mirror and a spherical reflecting mirror. The single laser beam can be effectively extracted.

18. 分析了微型螺旋面叶轮的结构和工艺特点，介绍了应用高精度万能铣床和特殊刀具加工该种叶轮的方法。

This paper analyzes the structure and characteristic of mini spiral face impeller, and introduces a new method by the use of milling machine and special cutting tool.

19. 本文利用螺旋面理论。结合计算几何知识，根据-麻花钻实物求出了加工该工件用的二次圆盘刀具截形。

On the basis of helicoid theory and computational geometry, the sectional contours of a sample twist drill were found for producing similar twis1t drills.

20. 以螺杆压缩机转子为例，介绍了未知螺旋面端截面轮廓及其啮合的共轭齿形求法，给出了实用计算公式。

Takes the screw type compressor rotor as an example, a calculating method of unknown section profile of spiral surface and its conjugate shape is introduced and practical formulas are given.

21. 给出了定子螺旋面和转子蜗杆齿廓曲面方程以及行星轮轮齿滚珠与定子螺旋面及转子蜗杆之间的接触线方程。

The curved surface equations of the teeth profile on the stator helical surface and the rotor worm are given.

22. 当垂直刀架下降时，由于摩擦力阻碍其下降，使丝杆的上螺旋面螺母的下螺旋面相接触，丝杆螺母的间隙在下面。

When the vertical turret decline, due to friction hinder its decline, the screw on helical screw nut under the physiognomy contact screw nut in the space below.

23. 以圆矢量函数为工具，推出了误差条件下的渐开螺旋面方程，并以啮合线为媒介，建立了测量蜗杆误差补偿的数学模型。wwW.wENtiYI.coM

With the tool of circle vector function, the involute helix profile with error is given, and with the media of engagement line, the error compensation mathematical model is established.

24. 常见的共轭曲面包括齿轮的齿面、空间凸轮的工作面和螺旋面等，其中螺旋面被广泛应用于螺纹、蜗杆、螺杆泵及金属切削刀具等领域。

The common conjugate surface includes tooth surface of gear, working surface of solid CAM, helicoidal surfaces existing in spiral burr, worm, chip flute of cutters, and so on.

25. 常见的共轭曲面包括齿轮的齿面、空间凸轮的工作面和螺旋面等，其中螺旋面被广泛应用于螺纹、蜗杆、螺杆泵及金属切削刀具等领域。

The common conjugate surface includes tooth surface of gear, working surface of solid CAM, helicoidal surfaces existing in spiral burr, worm, chip flute of cutters, and so on.