词语导航
基本信息
词语：冷却通道
繁体：冷卻通道
拼音：lěng què tōng dào
英语翻译
【化】 cooling ductwww.wEntiyI.Com
分词翻译
冷却的英语翻译：
cool; cooling; refrigeration
【计】 chilling; cooling
【化】 cooling
【医】 cooling; refrigeration
通道的英语翻译：
byway; channel; dypass; gangway; gate; passage
【计】 C; CH; path way
【化】 gangway; passage
【医】 passage
翻译例句
1. 成功制造出带冷却通道的火箭发动机推力室身部样件。
A sample of rocket engine thrust chamber with cooling channels was successfully manufactured by APEF.
2. 冷却通道与光滑的内护套之间用弹性元件紧紧地密封起来。
The cooling channels are sealed most effectively against the smooth inner jacket by elastic elements.
3. 分析了这种新型树状分形冷却通道结构的几何特征和阻力特性。
Secondly, the geometric characteristics and the feature with respect to pressure drop of the new cooling structure were analyzed.
4. 因此对等离子体阳极冷却通道内冷却水流场的研究也因此而具有重要的意义。
So it is significance to investigate the cooling water flow field in the cooling channels of plasma anode.
5. 经过两年多的实际生产过程应用，验证了所开发的斜航线冷却通道加工方法的正确性和可行性。
The two-year manufacture practice has confirmed the validity and feasibility of developed loxodrome coolant channel milling method.
6. 间隙部分限定冷却通道的至少一部分，并至少由彼此分离的在顶板一侧上的一个边缘和橱柜形成。
The gap portion defines at least a portion of the cooling passage, and is formed by at least an edge on one side of the top plate and the cabinet separated from each other.
7. 对推力室冷却通道内的人为粗糙度强化换热机理进行了分析，讨论了影响人为粗糙度强化换热的因素。
The mechanism and influence factors of artificial roughness (ar) on enhanced heat transfer in chamber cooling channels have been analyzed.
8. 计算结果表明：增加通道深宽比对推力室壁面能够起到强化传热的作用，但同时也增加了冷却通道的进出口压差。
The simulation results show that the heat transfer of rocket chamber will be enhanced when increasing the aspect ratio, but the pressure drop will increase simultaneously.
9. 在任意曲线坐标系下对带有横向波纹隔热屏、外冷却通道和尾喷口的涡喷加力燃烧室的三维热态流场进行数值模拟。
The flow field calculation and buckling analysis were conducted for the afterburner with a heat shield, flame stabilizer and jet nozzle.
10. 本实验选取航空发动机涡轮叶片中段内部冷却通道为研究对象，对不同肋间距的横肋变截面U型通道的换热特性进行了研究。
The experiment has studied the heat transfer characteristic inside U shaped variable cross-section channels with different rib pitches, The channel is the middle part of a gas turbine blade.
11. 本文在涡轮叶片新型超级冷却技术机理研究的基础上，设计了旋转条件下带冷却通道的新型超级冷却与涡轮叶片粗糙肋强化冷却对比实验。
A new turbine blade"s cooling technique, which was based on the theory of thermally driven, was studied further. Two kinds of experimental models with internal cooling tunnels were designed.
12. 本文对涡轮叶片尾缘中具有束腰结构扰流柱的冷却通道的传热和流动阻力特性进行了实验研究，重点研究了雷诺数、扰流柱的束腰比以及不同组合的影响。
The heat transfer and characteristics of the fluid flow in the duct with waist-shaped pin - fin arrays for the trailing edge of the turbine blade were experimentally investigated.
13. 去年，苹果公司发布了一款个人电脑，它是由液体冷却的，液体通过处理器里的小通道输送。
Last year, Apple launched a personal computer that is cooled by liquid that is pumped through little channels in the processor.
14. 这是因为这些狗狗的鼻骨通道不够长，不能完全冷却空气。
This occurs because the nasal passages are not long enough to allow proper cooling of the air.
15. 但是对于污水或生活污水应用领域，冷却套通道由于淤积固体颗粒、油脂、腐蚀等等却极易发生堵塞。
For dirty water or sanitary sewage applications, clogging of the cooling jacket passages can easily occur due to a build-up of solids, grease, corrosion and other matter.
16. 在所有的通道里布置上冷却管常常是最好的方案。
Piping all of the channels in series is often the best solution.
17. 重要的是要知道，冷却剂是否在每条通道中流动。
It is important to know if the coolant is flowing in EACH channel.
18. 彼此平行的电路总意味着一些通道得到的冷却剂较少。
Circuits that are in parallel with others almost always mean that some channels get little coolant.
19. 务必避免通道中有冷却点存在，否则会使一些高沸点流出物在中途冷凝而影响质谱定量结果。
It is certain to avoid cooling point in the channel, in case some outflow with high boiling point condensate in halfway to affect quantitative results.
20. 叶片内部通道冷却技术在航空发动机叶片的设计中占有重要的位置。
The cooling technique of the blade inner passage plays a significant role in the design of blades for gas turbine.
21. 依据热泳基本原理，设计了一种新型湍流方环形双壁冷却式通道。
A kind of new turbulent flow in annular square channel with two cooled wall was designed on basic thermophoresis principle.
22. 介绍了一种新型的冷却系统—微通道制冷系统。
This paper introduces a new kind of cooling system-Microchannel cooling system.
23. 将退火带钢在冷却段冷却到指定温度，经密封通道进入锌锅。
The annealed strip is cooled to the temperature required by galvanizing process in the cooling zone and then goes into zinc pot through sealed channel.
24. 用扩散冷却辐射状电极列阵构成多通道板条放电。
Multiple slab discharges are established in a diffusion cooled radial electrode array.
25. 当你通过你的鼻腔呼吸时，冷空气进入了你的鼻腔通道，这冷却了静脉和流经静脉的血液。
When you breathe through your nose, you bring cool air into your nasal passages, which cools the veins and the blood flowing through them.
26. 本文通过数值模拟的方法同时考虑了耦合传热和冷却流通道流动对气膜冷却的影响。
Numerical simulations were used to assess the effect of a conjugate heat transfer and internal coolant flow on film cooling.
27. 通过分析，对微通道热沉材料、冷却液、微通道热沉的结构参数以及热沉与激光器列阵条的封装等进行了优化设计。
Based on the analysis, the heat sink materials, cooling liquid, the heatsink structure, and the bonding of laser bar are optimized in order to increase the transfer efficiency.
28. 计算结果表明，在船体的水平加速度较大时，通道出口冷却剂的温度与流场的变化很大，但持续时间较短。
The result shows that the coolant temperature and velocity fields in the channel vary significantly when the horizontal acceleration is big, but the variation time is short.
29. 计算结果表明，在船体的水平加速度较大时，通道出口冷却剂的温度与流场的变化很大，但持续时间较短。
The result shows that the coolant temperature and velocity fields in the channel vary significantly when the horizontal acceleration is big, but the variation time is short.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！