正交应力用英语怎么说，正交应力的英文翻译

词语导航

基本信息

词语：正交应力

繁体：正交應力

拼音：zhèng jiāo yīng lì

英语翻译

【机】 normal stress

分词翻译

正交的英语翻译：

【计】 quadrature
【医】 orthogonality

应力的英语翻译：

stress
【化】 stress
【医】 stress

翻译例句

1. 通过对多工况下正交异性板测试结果进行分析，说明桥面板的实际应力情况。

Through the analysis of testing results of orthotropic steel deck under more loading cases, actual stress in deck is presented.

2. 本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。

This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.

3. 在优化设计中，用正交法分析了结构形式和构件变化对应力变化的影响，得出了合理的结构形式和构件尺寸。

In the optimum design, effects of variety of structure type and structural components on stress are analysed, so that reasonable structure type and component dimensions may be obtained.

4. 给出一种解析方法求解在两种热载荷冲击作用下，正交各向异性圆柱体的动应力和磁场矢量扰动的集中效应。

The analytical expressions for the dynamic stresses and perturbation of magnetic field vector are obtained by means of a finite integral transform and Laplace transform.

5. 结果表明：四边铰支的正交异性层合板，当其长厚比小于30时，横向剪切变形对其位移和应力的影响是不容忽略的。

The results showed that the effects of traverse shear on displacement and strees are not ignorable, as the length thick ratio of laminate is less than 30.

6. 阐述了利用正交偶极声波测井资料估算地层应力场的方法及应用实例。

Described are an effective method and practical applications for determining the formation stress field using borehole cross-dipole acoustic logging data.WWW.wENTIyi.com

7. 确定了膜片的主振方向和受应力最大的点，为正交试验优化提供了计算依据。

So find out the point whose stress is the maximal and Y is the direction of primary vibration.

8. 针对均布载荷作用下正交各向异性梁在两端固支条件下的平面应力问题，求解了应力和位移的解析解。

For the plane stress problem of fixed end orthotropic beams subjected to uniform load, the analytical solutions of stress and displacement were resolved.

9. 在此基础上，采用正交设计方法和神经网络进行了岩体地应力场三维变形反演分析，获得了岩体地应力场沿深度的分布规律。

Then a three-dimensional deformation inversion analysis is conducted by orthogonal design method and neural network to acquire the distribution rule of rock body ground stress field at various depths.

10. 薄壁钢扁平箱梁正交异性板钢桥面系第二体系应力的计算方法主要有P -E法、等效格子梁法和有限元法等。

There are mainly three methods in the second system stress analysis of the orthotropic steel deck, P-E method, the equivalent girder beam method and the FEM.

11. 本文主要研究了正交面齿轮的齿面生成、正交面齿轮传动的弯曲应力和接触应力的有限元分析。

In this thesis the generation of orthogonal - aligned - shaft face gear, finite element analysis (fea) of the bend stress and contact stress of the fg drive are studied.

12. 运用非线性有限元分析技术，对由多层正交各向异性复合材料组成的某型空气弹簧进行了应力和模态分析。

The Nonlinear Finite Element Analysis was applied to study the stress and modal of an air spring, which is composed of composites with multiple orthotropic materials.

13. 正交各向异性和各向同性材料的应力强度因子均为本文的特例。

The stress intensity factors of both orthotropic and isotropic materials can be obtained from the present results.

14. 研究了在均匀径向压力作用下圆柱正交异性复合厚壁圆筒的弹-塑性应力场和位移场。

The elastic-plastic stress and displacement fields of cylindrically orthotropic composite thick-walled tube under uniform radial pressure are studied.

15. 索网架结构将预应力技术与网架技术融为一体，由正交正放预应力索桁架组成。

Spatial cable truss structures are composed of orthogonal prestressed cable trusses which combines prestress technology with space grid structures.

16. 以正交各向异性无限大板孔边应力场解析解为基础，导出了释放应变矩阵计算表达式，并用一个算例验证了该计算式的正确性。

Based on the analytical solution to stress field around a hole in a stressed orthotropic infinite width plate, a set of equations was derived to calculate the relieved strain matrix.

17. 文章对含i型裂纹的正交各向异性功能梯度材料板沿其板厚的弹性常数表达式呈指数函数变化时的应力-应变场进行分析。

In this article, the fracture analysis on mode I crack of orthotropic functionally gradient materials is studied, under which the elastic constants changed exponentially along thickness of the plate.

18. 对正交接管焊接接头的温度场和应力场进行了数值模拟。

Temperature and stress fields of multi-pass welding of orthogonal nozzles were simulated.

19. 对受平面应力场的作用的正交异性板的表面应力，应变进行了实测研究。并对测试误差进行了分析。

The surface strain of the orthogonal plate is measured under the action of the planar stress field, and the error is analyzed.

20. 推导了具有工程背景的弱正交异性材料的超声波斜入射应力-声关系。

The stress acoustic relationship for off axis ultrasonic wave is derived in slightly orthotropic material.

21. 文章给出了正交异性材料线性无量纲屈服准则的一般形式和平面应力状态下的特殊形式。

The yield locus which liner dimensionless yield criterion can express the yield character of orthotropic materials better in the sense of physical.

22. 用近似解析方法推导出拉伸正交各向异性有限宽板偏心圆孔的应力集中系数的显式表达式，除了比较极端的情况外，该式的精度较好。

Using an approximate analytical method, the explicit expression of stress concentration factors is derived for an eccentric circular hole in a tension orthotropic finite-width strip.

23. 根据正交切削特点建立了有限元模型，应用弹塑性力学讨论了切削变形区的弹、塑性阶段的应力、应变状态。

Establish finite element model, and use elastic - plastic mechanics to discuss stress-stain state of elastic and plastic deformation in cutting zone.

24. 在实例计算中，求解了正交各向异性厚壁圆筒在不同的扭转载荷作用下，两种厚壁结构的剪应力响应历程和分布规律。

As numerical examples, the response histories and shear stress distributions of two kind of orthotropic thick_walled cylinder under different torsion loads are investigated.

25. 本文采用正交设计的方法，对粉煤灰在高强预应力混凝土轨枕中的应用进行了试验研究。

This paper studied the application of fly ash on concrete sleeper with the method of ortho design.

26. 在高低周复合疲劳研究中采用了正交试验设计的方法，并以此为基础综合研究了低周应力、高低周应力比、高周循环次数和高周循环频率对复合疲劳寿命的影响及其机理。

Based on the orthogonal test design, this paper studied the effect of low cycle stress, high-low cycle stress ratio , high cycle number and high cycle frequency on complex fatigue life.

27. 当上下半平面材料参数相同时，可获得受弯曲载荷正交异性复合材料板裂纹尖端应力场，并利用有限元算例分析验证了理论结果的正确性。

When the upper and the lower half-planes are of the same parameters, the stress field of crack of orthotropic composite materials can be obtained. The derived equation is verified with FEM analysis.

28. 抛弃任何有关位移或应力模式的人为假设，在轴对称情况下导出正交异性体的状态方程。

Discarding any assumptions about displacement models and stress distribution, the state equation is established for the axially symmetric problem of orthotropy.

29. 运用有限元方法对正交接管结构在常规焊接和在线焊接条件下的温度场和残余应力场进行了数值模拟。

Temperature field and residual stress field of orthogonal structure under normal welding and in-service welding condition were simulated by FEM.

30. 运用有限元方法对正交接管结构在常规焊接和在线焊接条件下的温度场和残余应力场进行了数值模拟。

Temperature field and residual stress field of orthogonal structure under normal welding and in-service welding condition were simulated by FEM.