缝工的用英语怎么说,缝工的的英文翻译


词语导航

基本信息

词语:缝工的

繁体:縫工的

拼音:féng gōng de

英语翻译

sartorial

分词翻译

缝的英语翻译:

seam; sew; slot; stitch
【化】 opening
【医】 crevice; nesis; raphe; rhaphe; seam; sutura; suturae; suturation
suture; suture joints; suturing

工的英语翻译:

labour; man-day; project; skill; work; worker

翻译例句

1. 其名称源自形容词“裁缝的”,原因是裁缝工作时常常采取盘腿坐姿。

Its name is a derivation of the adjective "sartorial," a reference to what was the traditional cross-legged position of tailors (or "sartors") at work.

2. 如果你擅长针线工作,你在应聘裁缝工作时和你应聘动物医院时,你会强调你工作经历中不同的部分。WwW.WentIyi.Com

If you are good with needle and thread, you will emphasize different parts of your work history if you are applying for a job as a tailor than you would for an emergency veterinary clinic.

3. 此外,这些类能与旧代码和新的泛型代码一起无缝工作(下个月,我们会说明如何做到这一点)。

What"s more, these classes work seamlessly with both legacy code and new generic code (next month, we"ll explain how that"s possible).

4. 计算结果表明,基于钢桥面铺装层带裂缝工作的事实,应用断裂力学方法预测钢桥面铺装层疲劳寿命是可行的。

The result indicates that fracture mechanics can be employed to forecast the fatigue life of the pavement on orthotropic steel bridge decks.

5. 希望本研究能够促进聚氨酯弹性嵌缝料在高等级水泥混凝土路面接缝工程中的应用。

We hope the achievement of this study can promote the application of this material at the high-level concrete pavement joint projects.

6. 包装部:车缝部的辅助部门,协助完成车间生产袋子的非车缝工作,如包装,剪线,翻袋等等。

Packing section: auxiliary section of sewing section. Assist to finish non-sewing work in producing bags, such as packing, cut threads, turn over bags, etc.

7. 并介绍施工中采用的ZY及超长结构不设缝工艺和复合塑料防水板工艺。

Two techniques during the construction are introduced including ZY over-long structure without joint and complex plastic sheet.

8. 文章从织物组织、原料配合、拼块形状及排列形式等方面对具有仿绗线、仿拼缝工艺效果的大提花织物的设计技法作了一些探讨和研究。

In this article is discussed the design skill of quilted and patchwork-like jacquard fabric from view point of fabric weave, yarn match and shape and arrangement of patchwork.

9. 无缝工艺将引发中国针织产业最具前景的结构性调整。

The seamless-knitting technology will give rise to the most prospective structure adjustment in Chinese knitting industry.

10. 带裂缝工作阶段的短期刚度和挠度分析。

The analysis on short-term stiffness and short-term deflection at inelastic stage with cracks.

11. 侧送型送料器多用于包缝工作,置于缝纫机的右侧,把困条送至包缝器。

It is mainly used for binding, mounted on the table at the right hand side of sewing machine and feed tape into the binder.

12. 至于鞋匠、工匠、裁缝工场和带喷涂仓的画家工作室则布置在建筑东翼的上面。

Further workshops for shoemakers, artisans and tailors and a painter"s studio with spray cabin have been located in the part of the building above the east wing.

13. 破得厉害的衣服应当找有经验的女缝工缝补。

Badly torn garments should be mended by an experienced seamstress.

14. 由于材料本身性能和施工等方面的缘故,一般混凝土结构在使用荷载下都是带裂缝工作的。

Due to characteristics of concrete material and influence of other factors such as construction and service, concrete structure is usually used under service load with multiple-crack.

15. 如果这个回火焊逢工艺被用作控制热影响区的最大硬度,那么,在回火焊缝工艺中焊缝的排列顺序的任何改变,都将符合新的标准。

If a temper bead technique is used to control the maximum hardness of the HAZ then any change in the bead sequence or placement of the temper bead shall require a new qualification.

16. 本公司是一家由外商独资,厂房面积共6000平方米,主要经营加工鞋面、各种无车缝工艺大型高频机的鞋材加工企业。

Ltd. is located in Shoes capital of China, Jinjiang City. Our company is a solely foreign owned enterprise with factory building covering 6000 square meters.

17. 最后对割缝增产的机理及磨料射流割缝工艺参数的选择进行了分析。

Finally, mechanism of slotting simulation and selection of technical parameters for abrasive jet slotting are analyzed.

18. 最后对割缝增产的机理及磨料射流割缝工艺参数的选择进行了分析。

Finally, mechanism of slotting simulation and selection of technical parameters for abrasive jet slotting are analyzed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!