粗轧机用英语怎么说,粗轧机的英文翻译


词语导航

基本信息

词语:粗轧机

繁体:粗軋機

拼音:cū yà jī

英语翻译

【机】 cogging mill; roughing-cown rolls; roughing-down mill

相关词条

1.bigmillroughingmill  2.strandofrolls  3.breakingdownmill  4.roughermill  5.roughmill  6.shapingmill  

分词翻译

粗的英语翻译:

careless; coarseness; grossly; thick; wide
【医】 pachy-

轧的英语翻译:

make friends; roll; roll steel
【机】 stranding

机的英语翻译:

chance; crucial point; engine; machine; occasion; organic; pivot; plane
flexible
【医】 machine

翻译例句

1. 该系统可充分满足粗轧机压下电机的控制要求。wWW.weNtIyi.COM

The system can meet the control requirement of screwdown motor of roughing mill.

2. 介绍二辊粗轧机的设备组成、结构特点及计算。

The article describes the constitution, structure and calculation of two-h rough rolling mill.

3. 探讨了由初轧至连轧粗轧机组实现直轧的可能性。

The possibility of direct rolling from blooming to rough mill of the FCHSM is also discussed.

4. 分析了粗轧机主传动扭振模型及动态特性计算方法。

The analytic model and dynamic response solution for torsional vibration of main driving system on rougher of rolling mill were studied.

5. 紧凑式连轧机是一种大压下轧制、近距离布置的粗轧机组。

The compact mill is a train of roughing machine with deep pressing and near arrangement.

6. 以某棒材粗轧机组力矩均衡分配为目标,对各孔型尺寸进行了优化设计。

Aimed at a uniform distribution of driving torques, an optimization design of pass parameters is carried out for primary bar rolling mills.

7. 针对带钢热连轧双机架粗轧机组的特点,应用综合等负荷函数法进行负荷分配。

An aggregate equal load function was developed and applied to the load distribution on a double-stand mill during hot strip rough rolling.

8. 结合宝钢2050热轧粗轧机组实际轧制工艺,建立带钢非对称轧制有限元模型。

An asymmetrical rolling model is established based on the actual technologies of the 2050mm roughing trains mill of Baosteel.

9. 本发明用无孔 型平轧辊代替现有技术的粗轧孔型轧辊实现高速线材粗轧机组无槽轧制。

The invention adopts a pass-free flat roller to replace a rough rolling pass roller of the prior art and realizes non-groove rolling of the high speed wire rod roughing mill group.

10. 根据粗轧机组自身的轧制特点,采用内外两层循环迭代的算法来分配粗轧机组的轧制规程。

Based on the features of rough mill, two-lever interative algorithm is used to calculate the pass schedule of rough rolling.

11. 热轧带钢在经过粗轧机组轧制后,头尾会出现舌头形、鱼尾形等缺陷,且头尾温度往往偏低。

Generally speaking, the head and tail of the hot strip will bring out tongue type and fish tail type bug and its temperature will be usually lower when it passes through the roughing mill.

12. 在唐钢高速线材轧机中,成功地实现了粗轧机和中轧机的微张力自动控制,取得了良好效果。

The Low tension control is successfully accomplished in the roughing and intermediate mill of the high speed wire rod mill at Tangshan Iron and Steel co., and a good effect is obtained.

13. 对上海宝钢2 0 50型热轧机生产线上的E2R2机组中的E2粗轧机进行结构强度评价。

The evaluation for the structure strength of the E2 rougher among E2R2 mills was carried out in Shanghai Baosteel 2050 hot rolling lines.

14. 本文介绍了国外开发的新型板坯调宽压力机的结构特点、主要参数及在热轧带钢轧机粗轧机组的应用。

Structure features, major design parameters and application of the new slab sizing press developed abroad to the hot strip roughing train are reviewed in this paper.

15. 通过AWC自动宽度控制和SSC短行程控制技术的应用实例,探讨粗轧机改造及实现宽度控制的措施。

According to auto-width control(AWC) and short-stroke control(SSC) practice to process, the methods of innovating rough-rolling mill and controlling width of rolling plate are discussed in this paper.

16. 利用BP神经网络,以某热轧厂粗轧机组数据库中的数据为训练样本,采用两种训练方案,对粗轧过程轧制力进行预测。

Based on the measured data from a hot strip mill, the rolling force in roughing was predicted by means of BP neural networks which adopted two kinds of training methods.

17. 以紧凑式轧机作为高速线材粗轧机组时,由于粗轧中各机架咬入和稳态轧制的张力不同,致使坯料出口头尾尺寸波动较大。

When taking compact mill as rough stands of high speed wire mill, the tensile force for biting and stable rolling are different, resulting in the dimension variation at end and middle part of product.

18. 首次对高速无扭线材轧机粗轧机组压力进行测试并取得成功,为优化工艺规程、优化孔型设计及设备全过程的经济管理与改进提供了可靠的依据。

The rolling pressure on high speed untwist wire rod mill was measured firstly and succeeded internationally for optimizing technology, pass design, and management of the plant.

19. 双机架炉卷热轧机是典型的往复式轧机,它的两个机架实现粗轧和精轧,轧制压力大,板型精度高。

Two-Stand Hot reversing mill is a reversing mill, two stand roll can realize roughing phase and finishing phase, large-scale rolling force, good shape.

20. 它适用于生产棒材的粗轧和中轧机组。

It applies to the roughing and intermediate trains of producing bar and rod products.

21. 詹仁杭,轧立式轧机减速机螺旋伞齿轮断齿原因分析湘钢一高速线材粗中轧立式机架减速机齿轮箱,第一级传动螺旋伞齿轮轮齿断裂。

A high speed line material vertical rolling mill framework moderating machine gearbox of Hunan steel Co. , Ltd, the gear teeth of the first transmission spiral bevel wheel were broken.

22. 短行程控制是热轧粗轧调宽过程中改善带钢端部形状、减少成材率损失的主要方法,而宝钢某热轧机组采用的传统的折线式短行程控制效果较差。

Short Stroke Control(SSC) is the main method to optimize the shape of strip ends and reduce metal loss in hot roughing, but the traditional broken line SSC model was not effective enongh at Baosteel.

23. 短行程控制是热轧粗轧调宽过程中改善带钢端部形状、减少成材率损失的主要方法,而宝钢某热轧机组采用的传统的折线式短行程控制效果较差。

Short Stroke Control(SSC) is the main method to optimize the shape of strip ends and reduce metal loss in hot roughing, but the traditional broken line SSC model was not effective enongh at Baosteel.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!