后倾角用英语怎么说,后倾角的英文翻译


词语导航

基本信息

词语:后倾角

繁体:後傾角

拼音:hòu qīng jiǎo

英语翻译

【机】 caster; caster angle

分词翻译

后的英语翻译:

after; back; behind; offspring; queen
【医】 meta-; post-; retro-

倾角的英语翻译:

incidence; inclination; obliquity
【化】 angle of inclination; angle of tilt; inclination; oblique angle
【医】 dip

翻译例句

1. 前大王销后倾角会影响直线的稳定性,以及在不同跑道下的行路表现。

The caster angle of the front hubs effects the straight line stability of the car and the way it reacts to different track conditions.

2. PD C切削齿尺寸、后倾角和布齿密度是影响PD C钻头性能的重要设计参数。

PDC cutter size, back rake and density are very important design parameters affecting the performance of PDC bit.

3. 进而通过主销横向、纵向偏移距以及主销内倾角和主销后倾角,计算出内倾拖距和后倾拖距。

Then through these two offsets, as well as kingpin inclination and caster, kingpin offset and caster trail can be calculated.

4. 简要介绍空气悬架导向臂的设计改进过程,并对改进前后的导向臂和主销后倾角进行简要分析。

This text introduces the process of design improvement of the air suspension guide arm, and analyzes the guide arm and kingpin caster Angle before and after the improvement.

5. 两种座椅后倾角可以适应不同体形的飞行员,尽管比斯利认为绝大多数飞行员会选择更为垂直的那种角度。

Two seatback angles accommodate pilots of differing sizes, though Beesley expects most pilots to select the more upright angle.

6. 试验模拟了切削面积、接触弧长、切削面形状、切削齿后倾角和岩石性能对PDC切削齿破岩受力的影响。

The effects of cutting area, contact arc length, the geometry of cutting face, back dip angle of PDC cutter and rock performance on force of PDC cutter breaking rock were simulated experimentally.

7. 目的:测量、比较分析中国人胫骨后倾角与半月板后倾角,为人工全膝关节置换术中胫骨侧截骨提供参考。

Objective To compared the posterior slop between tibial plateau and meniscus in Chinese population for determining the angle of tibial osteotomy during total knee replacement(TKA).

8. 基于汽车主销倾角测量原理,从车轮转角测量误差角度出发,对汽车主销内倾角和主销后倾角的测量误差进行了分析。

Based on vehicle kingpin Angle measuring theory, the paper analyzes the measuring errors of kingpin inclination Angle and kingpin caster Angle from wheel steering Angle measuring errors.

9. 汽车车速、转向系统扭转刚度和主销后倾角对回正性能的影响较大,而转向系统的粘性摩擦系数对回正性能的影响相对较小。

Returnability is affected mainly by automobile velocity, torsional stiffness of steering system and caster angle and relatively little by viscous friction coefficient of steering system.

10. 本文对刮削过程中工作角度问题进行了探讨,并对工作刃倾角、工作前角和工作后角进行了具体计算,得到了一些变化规律。

A study is made on the working Angle in scraping process, practical Calculations are taken up to the Angle of working edge, rake Angle and back Angle. Some patterns of such change are found out.

11. 利用地震能量分位数频率、倾角方差和瞬时倾角等叠后地震属性可对裂缝发育带进行定性预测。

Post stack seismic attributes such as seismic energy fractile frenquecy, dipping angle variance, instantaneous dipping angleetc. can be used to predict fracture developing band.

12. 优化后,在剪切区,剪刃剪切倾角和连杆水平速度均匀性两项指标均有所提高。

After optimization, the cutting Angle and the difference between the instantaneous velocity and the average velocity in the cutting area of the shear are decreased.

13. 考虑扩容效应后,剪切带的倾角和宽度均增加,剪应变率的局部化程度降低。

The inclination Angle of shear band and its width increase as dilatation Angle is increased. The extent of localized deformation decreases as dilatation effect is considered.

14. 蹬完第三次腿后浮出水面,保持尽可能小的一个倾角,只要能抑制住呼吸,尽可能远地滑行。

Surface after the third kick, at as low an angle as possible and continue gliding as far as possible for as long as you can hold your breath.

15. 针对动能杆式弹大倾角斜撞击靶板产生的靶后破片,建立了其初始破片云数学描述模型,并在此基础上对斜撞击靶后破片特征分布进行了建模。www.weNtIyi.COm

For the description of the debris behind oblique single plate target perforated by kinetic projectile, an initial armor debris cloud model has been proposed.

16. 针对动能杆式弹大倾角斜撞击靶板产生的靶后破片,建立了其初始破片云数学描述模型,并在此基础上对斜撞击靶后破片特征分布进行了建模。

For the description of the debris behind oblique single plate target perforated by kinetic projectile, an initial armor debris cloud model has been proposed.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!