钢合金用英语怎么说,钢合金的英文翻译


词语导航

基本信息

词语:钢合金

繁体:鋼合金

拼音:gāng hé jīn

英语翻译

【机】 steel alloy

分词翻译

钢的英语翻译:

steel
【化】 steel
【医】 steel

合金的英语翻译:

alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy

翻译例句

1. 最后对工具钢合金化及热处理质量控制问题进行了介绍。

Finally on tool steel alloying and heat treatment quality control problems were introduced.

2. 广泛用于碳钢、低碳合金钢、不锈钢、钢及钢合金的焊接。

It"s widely used in the welding of carbon steel, low carbon alloy steel, stainless steel, steel and alloying steel.

3. 结果表明,研究不锈钢合金系统的超高温腐蚀行为十分必要和迫切。wWw.weNTiyI.cOM

The results show that it is necessary and urgent to research the super-temperature corrosion behavior of the stainless steel alloying system.

4. 而杆的大部分可由钛基粉末材料制成,其杆头可由高强度硬化材料,例如钢合金制成。

While a majority of the stem may be made from a titanium-based powder material, its tip may be made of a high strength hardened material, such as a steel alloy.

5. SUS304不锈钢合金即已用于薄膜型LNG货物围护由于其晃荡载荷的结构能力。

Stainless steel alloy i. e. SUS304 has been used for the membrane type LNG cargo containment because of its structural capacity for sloshing loads.

6. 系统总结了管线钢合金设计的基本思想,力求为研制综合性能更佳的管线钢指明方向。

This paper systematically summarizes the basic design idea aiming at developing the pipeline steel with better comprehensive properties.

7. 作为合金元素加入钢中可使钢合金化,增加钢的强度、硬度、延展性、韧性和耐磨性等。

As an alloy element, silicon manganese can alloy the steel, strengthen the intensity, hardness, malleability toughness and wearability of the steel.

8. 利用中间过渡层的作用,在镁基金属复合材料上激光熔覆了不锈钢合金层,熔覆层与基体为冶金结合。

With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding.

9. 随着439不锈钢合金成分中铝含量的增加,冷轧退火板的晶粒尺寸较小,硬度、屈服强度和抗拉强度升高。

When the aluminum content increases, the grain size of cold-rolled annealed panel becomes small, but the hardness, yield strength and tensile strength of stainless steel 439 increase.

10. 重点介绍了按金相组织分类的贝氏体、马氏体类合金结构钢和铁素体、马氏体、奥氏体类不锈钢合金焊丝的生产工艺。

It mainly introduces the production processes of alloy structural steel welding wires of bainite and martensite and stainless steel welding wires of ferrite, martensite and austenite.

11. 阀杆应该是以镀镉钢合金或316不锈钢作为标准配置。备选的阀杆材料可以根据要求提供,例如,钛,不锈钢,等等。

The shaft shall be cadmium-plated steel alloy or 316 stainless steel as standard equipment. Optional shaft materials shall be available on request, i. e. , titanium, stainless steel, etc.

12. 通常简称为“18 - 8”(18%的铬,镍8%)的T- 304是基本的不锈钢合金,利用最常用的丝布编织。

Often referred to as "18-8" (18% chromium, 8% nickel) T-304 is the basic stainless alloy most commonly utilized for wire cloth weaving.

13. 虽然K - 5的机身紧凑、小巧,但是却异常坚固和耐用,外壳采用耐用且轻量的镁金属合金,骨架采用高强度的不锈钢合金。

Despite its compact dimensions, the K-5 is built to be exceptionally solid and durable, with a body of sturdy yet lightweight magnesium alloy, and a chassis of highly rigid stainless steel.

14. 线棒——是由一种钢合金与高分子塑料的复合管,其外层与内层均为复合塑料涂层,通过粘合剂与中间层钢合金管道复合成一体的柔性管道。

The flexible pips are made by one kind of steel alloyed and the macromolecule plastic composite pipe (lean pipe). The outer and inner layers of the pipe are coated composite plastics.

15. 运送废燃料的容器极为坚固,是用钢或钢铅合金制成的。

Flasks for the transport of spent fuel are extremely strong containers made of steel or steel and lead.

16. 产出的钢在强度和韧性方面的综合性能可与合金含量非常丰富的现代钢相媲美,因此价格非常昂贵。

The resulting steel appears to achieve a combination of strength and toughness that is comparable to that of modem steels that are very rich in alloy content and, therefore, very expensive.

17. 由此产生的钢似乎达到了强度和韧性的结合,这与合金含量非常高因而非常昂贵的现代钢相当。

The resulting steel appears to achieve a combination of strength and toughness that is comparable to that of modern steels that are very rich in alloy content and, therefore, very expensive.

18. 渐渐地,他不再直接使用这些小钢块,而是利用它们压制出中等大小的模具,用这些模具可以批量生产出铅合金的字母块。

Eventually, instead of printing from these directly, he employed them to stamp out intermediate dies which were then used as moulds to mass produce letter blocks made of a lead alloy.

19. 钢是铁与碳的合金,焦煤便是熔炼过程中碳的来源。

Steel is an alloy of iron and carbon. Coking coal is a source of carbon in the smelting process.

20. 门厅的票房以不锈钢、绿大理石、青铜和银铜合金制成,配有装饰格子,是20世纪早期设计风格的绚烂结晶。

The foyer box-office, for instance, is a gorgeous piece of early 20th-century design in stainless steel, green marble, bronze and silver bronze with ornamental grilles.

21. 大约有一半的铸铝工艺是高压模铸(HPDC),在这种工艺中,通过压力将液态铝合金注入钢模,或模具。

About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.

22. 不锈钢、磁铁、硬币、吉他弦、电池等多种合金都含有镍。

Nickel is used in stainless steel, magnets, COINS, guitar strings, batteries, and in many different alloys.

23. 可以用于铸造的材料类型有:铝合金、青铜、工具钢、不锈钢、钨铬钴合金、镍基合金和贵金属。

Thee types of materials that can be cast are aluminum alloys, bronzes, tool steels, stainless steels, stellite, hastelloys, and precious metals.

24. 而假如变紫红色:无磁性的为高锰钢,有磁性的通常为通常钢或低合金钢。

And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.

25. 而假如变紫红色:无磁性的为高锰钢,有磁性的通常为通常钢或低合金钢。

And if the purple red: nonmagnetic as high manganese steel, magnetic usually usually steel or low-alloy steel.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!