金属壳用英语怎么说,金属壳的英文翻译


词语导航

基本信息

词语:金属壳

繁体:金屬殼

拼音:jīn shǔ ké

英语翻译

【化】 metallic shell

相关词条

1.metallicshell  

分词翻译

金属的英语翻译:

metal
【化】 metal
【医】 metal
【经】 metal

壳的英语翻译:

carapace; hull; rind; shell; shuck
【化】 cover
【医】 crust; crusta; crustae; putamen; shell; testa

翻译例句

1. 耐用的电动盲孔铆钉安装工具,用于金属壳建筑构造。

The rv73g is a rugged electric bulb-tite installation tool designed for use in metal clad building construction.

2. 如果条件允许,还可以在电烙铁的金属壳部分缠上一根地线。

If the conditions allow, but also electric iron in the metal shell wraps part of a ground wire.

3. 迪欧斯说:“最具挑战的部分是在一个金属壳内做文章,发挥的空间实在很小。”

The most challenging part with this project is trying to build something inside a metal hull -- it"s just really, really tight.

4. 备注:玻璃球面金属壳封装,产品照片及尺寸仅供参考,具体请以实物为准。

Note: Product picture & dimensions are for reference only. Detailed information is in accordana with the final product.

5. 整个齿轮齿条式转向器装载金属壳内,其齿条从转向器伸出来与转向摇臂连接。

A rack-and-pinion gear set is enclosed in a metal tube, with each end of the rack protruding from the tube.

6. 该金属壳件具有一主壳体及至少一组装开口,该组装开 口设置于该主壳体上。

The metal shell has a main shell and at least an assembled opening which is arranged on the main shell.

7. 聚苯乙烯薄膜介质扩展箔电容器详细规范。单向端接矩形非金属壳。全面附加评定级。

Detail specification for polystyrene film dielectric capacitors, extended foil - Rectangular non-metallic case, unidirectional terminations - Full plus additional assessment level.

8. 并且他说营救人员正在辩论他们是否实际需要铺设金属壳的营救管道作为计划,这个过程将花费几天!

And he said rescuers were debating whether they would in fact need to line the rescue tunnel with metal casing as planned, a process that would take several days.

9. 波纹式头部设计,防止固体颗粒从密封面上撞出,使得密封能够抵抗更高的压力和旋转速度,避免金属壳接触到密封环。

The crimped head design, prevents solids from dislodging the seal face, allows the seal to withstand higher pressure and rotational speed and eliminates the metal shell from contacting the seal ring.

10. 本文对电弧喷涂快速制模技术进行了系统的研究,发现喷涂金属壳和背衬材料的性能优劣直接影响到整个模具的使用寿命。

Investigating Arc-spraying Rapid Tooling by the Numbers, we find that performance of spraying metal shell and the backup material influences the employ life of Arc spraying die.

11. 板块运动是地幔运动的表面现象。地幔是位于地壳和金属内核之间的一层厚厚的岩石壳。

Plate movements are the surface expressions of motions in the mantle—the thick shell of rock that lies between Earth"s crust and its metallic core.

12. 然后把栗子放在一个金属板上,用微波炉高温加热40秒,栗子壳就会像蒸熟的蛤一样裂开。

Then he lays the nuts on a plate and microwaves them on high power for 40 seconds.The shells pop open like steamed clams.

13. 然后把栗子放在一个金属板上,用微波炉高温加热40秒,栗子壳就会像蒸熟的蛤一样裂开。

Then he lays the nuts on a plate and microwaves them on high power for 40 seconds. The shells pop open like steamed clams.

14. 更沉重的壳:锈蚀斑斑的波浪形铁,坍塌的墙,或是留在好望角巨大的混凝土块,人工做的悬崖,用古代的金属丝做成的胡子等等。

Heavier coverings: rusting corrugated iron, broken-down walls, or at Hope cove giant concrete blocks, mimicking the cliffs, whiskered with antique wire.

15. 金属拱型波纹屋顶是一种新的拱型薄壳结构,得到了较为广泛的应用。

Metal corrugated arch roof is a new kind of thin-shell structure and has a wide application.

16. 通过采用真空压差铸造工艺,结合铸造型壳的制造,成功制造出金属零件。

Some metallic parts are successfully fabricated using a vacuum pressure difference casting technology and a casting mould shell technology.

17. 关键制模工艺包括:母模制备、金属型壳制造、模框制作、背衬强化层制作、脱模以及后处理等。

Arc spray tooling process mainly includes: master pattern preparation, surface pretreatment, fabrication of the metal shell, frame fabrication.

18. 汽车车身是由金属薄片壳、车窗、车门、发动机罩和行李舱盖等共同构成。

An automobile body is a sheet metal shell with Windows, doors, a hood, and a trunk deck built into it.

19. 有些废旧产品的外部塑料壳和内部金属元件可重新利用等。

The external plastic material casings of some old and useless produces with the interior metal element may utilize once more.

20. 其屏蔽盒应用主气隙,防止原电流产生的磁场集中在屏蔽壳的金属板内。

Its shielded box should be used the main air gap and prevent the primary current to produce the magnetic field concentrating in the shield shell metal plate.

21. 广泛应用于不锈钢筒灯、管状灯具、防火材料灯杯、电源处壳、筒状灯、其它金属灯壳、电源铝壳、压环等部件。

Be widely used in stainless steel tube light, tubular lamps and lanterns, fireproof lamp cup, tubular lamp, other metal lamps shell, power supply aluminum shell, adapter and other components.

22. 以环己烯、苯和苯乙烯为探针物,采用原位FT-IR技术对贵金属催化剂上(活性组分呈壳层分布)吸附烃类的原位加氢反应进行了研究。

Using cyclohexene, benzene and styrene as probe molecules, hydrogenate reaction in situ of hydrocarbons adsorbed on noble metal catalysts (egg-shell distribution) were researched by in situ FT-IR.

23. 结疤。通常由钢锭缺陷引起的、附着在完好金属表面上的薄壳状或镶片状缺欠。

Scab. An imperfection in the form of a shell or veneer, generally attached to the surface by sound metal. It usually has its origin in an ingot defect.

24. 纯金属抛壳,美。

Metal polishing shell, beautiful designed.

25. 试验和生产结果表明,对于锥形起重电机定子壳的生产,液态金属模锻工艺比压力铸造工艺更合理。

It has been proved by the results of experiment and production that molten metal forging is more advanced and reasonable than pressure casting for the production of crane motor stator shell.

26. 金属拱形波纹屋盖结构是一种新型的金属拱形薄壳结构。

Arched Corrugated metal Roof (ACMR) is a new type of metal arched thin shell structure.

27. 在大型金属模具方面,现在已能生产48英寸电视的塑壳模具、大容量洗衣机的金属模具,以及汽车保险杠、整体仪表板等模具。

In large metal molds, it is now able to produce the plastic shell mold 48-inch TV, large capacity washing machine metal mold, and the bumper, the whole instrument panel mold.

28. 在大型金属模具方面,现在已能生产48英寸电视的塑壳模具、大容量洗衣机的金属模具,以及汽车保险杠、整体仪表板等模具。WWW.wEnTIYI.COm

In large metal molds, it is now able to produce the plastic shell mold 48-inch TV, large capacity washing machine metal mold, and the bumper, the whole instrument panel mold.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!