
词语导航
基本信息
词语:面涂层
繁体:面塗層
拼音:miàn tú céng
英语翻译
【化】 finishing coat
分词翻译
面的英语翻译:WwW.wEntiyi.COM
face; surface; cover; directly; range; scale; side
【医】 face; facies; facio-; prosopo-; surface
涂层的英语翻译:
coating
【计】 coating
【化】 coating
翻译例句
1. 表面涂层:用于改变面材的表面特性。
Surface coating: used to alter the surface properties of face stock.
2. 由该底层涂料组合物形成的底涂层与由紫外光固化涂料组合物形成 的面涂层之间的附着力较强。
There is strong adhesive force between base coat formed by the prime paint combination and top coat formed by the ultraviolet light solidified paint combination.
3. 本发明延伸至半导体光催化剂在底漆组合物中作为面涂层对底漆层的附着促进剂或者作为底漆层对面涂层的分层抑制剂的用途。
The invention extends to the use of a semiconductor photocatalyst as a top-coat to primer adhesion promoter or as a primer to top-coat delamination inhibitor in a primer coating composition.
4. 如果单层纳米管道的另一面被覆盖了金属锂的涂层,这样的平板就颇似一个锂离子电池。
A sheet containing one layer, but with a coating of metallic lithium on the other side, ACTS as a lithium-ion battery.
5. 第一要用温水来洗净方便面,搅拌它,倒出含有蜡涂层的水。
Wash the instant noodles with warm water first, stir it and pour away the water containing the wax coating.
6. 一般来说,喷涂底漆多选用大口径喷枪,喷涂中间涂层时选用中口径喷枪,喷涂面漆时多选用小口径喷枪。
In general, more choice of large caliber gun spraying paint, spraying coating used in intermediate caliber gun, small caliber gun with spray paint.
7. 怎样知道面漆涂层质量是好的?
How do you know the finish coating is of good quality?
8. 有很多方法来完成来完成这最后一步,比如施粉、氯化、使用高分子涂层或采用聚氨酯饰面。
Now there are several different ways to go about finishing a glove, including polymer coating, chlorination and polyurethane finishes.
9. 另一方面,47%的患者出现了再狭窄,而应用裸支架的患者再狭窄发生率据报道是28%,而应用涂层支架的是6%。
On the other hand, restenosis developed in 47% of patients, versus reported rates of 28% for bare metal stents and 6% after drug-eluting stents.
10. 首先要用温水洗净方便面,然后搅拌,倒掉含有蜡涂层的水。
Wash the instant noodles with warm water first, then stir it and pour away the water containing the wax coating.
11. 涂层对入射光的散射作用可以分为面散射和体散射两部分。
The action between incident light and coatings can be divided into two parts, surface scattering and volume scattering.
12. 要求不能涂层的面需要能用机械或者物理的方法遮盖。
Surface which must not be coated should be capable of being covered by a mechanical, or physical mask.
13. 为了装卡需要,模具上需要有孔,螺纹或者允许不涂层的面。
In order for the tool to be held, there must be holes, a thread or a surface which can remain uncoated.
14. 明智的做法是,在我们吃另外的一包方便面之前要有一个2 -3天的休息,因为我们的身体大约需要3天把那层蜡涂层从我们的身体清理出去。
It is advisable to have a break of 2-3 days before we start to eat another packet of instant noodles as our body need about 3 days to clear that layer of wax coating away from our body system.
15. 讨论了耐雨蚀面漆中聚酯树脂、多元醇和颜料对其性能的影响,施工工艺对耐雨蚀涂层与底涂层之间配套性能的影响。
The influence of polyester resin, polyols, and pigments on performance of topcoat and influence of application technology on compatibility between primer and topcoat are discussed.
16. 浸渍涂布:纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
Dip coating: coating method in which the web is passed around a roller immersed in solution.
17. 明智的做法是,在我们吃下一包方便面之前要有一个2 -3天的间隔。因为我们的身体大约需要3天才能把那层蜡涂层从我们的身体清理出去。
It is advisable to have a break of 2-3 days before we start to eat another packet of instant noodles as our body need about 3 days to clear that layer of wax coating away from our body system.
18. 评述了汽车面漆的主要考察指标及影响因素,重点讨论了汽车面漆的户外耐久性,涂层的外观和物理机械性能。
This article has discussed the main examine items and influencing factors for automotive top coatings, focusing on the outdoor durability, film appearance and mechanical properties.
19. 于所述刹车面与陶瓷涂层之间还附着有一金属底层。
A bottom layer of metal is attached between the braking face and the ceramic coating.
20. 本文介绍了LX88A制取的工艺特点及涂层性能,并分析了类似于流化床作业面所经受的冲蚀磨损与磨粒磨损过程。
This article introduces the technology characteristics and coating functions of LX88A, as well as the abrasion and erosion wear resistance processes.
21. 本文介绍了黑涂层热阻的测量,进而推及热电型电校准辐射计锥腔型灵敏面黑涂层热阻的校正因子。
Measurement of thermel resistance black painting was described, and thus calibration factor of the black painting of the response area of the absolute radiometer.
22. 待修复的区域必须进行清理,除去缺陷。修复面必须平整、光滑、以保证涂层和原涂层一样。
The area that need repaired must be blast cleaning and remove the defect. The repairing surface must be neat, smooth to keep the coating accord with original coating.
23. 被分隔成两间展室的地下室采用红色的涂层饰面。
The basement floor is finished with red coat and is divided into 2 exhibition spaces.
24. 钢板材质箱体出厂前已覆盖粉末涂层,面漆为灰色的RAL7001。
Steel plate material box factory has covered before powder coating, paint for gray RAL7001.
25. 由于表面铝板的色泽涂层是通过连续式辊涂技术将面漆附着在铝板上面,并且是一次性完成,保证其色泽的一致性。
Since the color coating process on the skin aluminum is to attach the paint on aluminum plate through continuous roller coating technique and finished in one time, so the color has super uniformity.
26. 为防止锅炉受热面泄漏,可在电站锅炉吹灰器吹损的管壁表面喷涂耐磨涂层。
To prevent the leakage of power station boiler, the coating resistant to abrasion was prepared on the tube surface damaged by the power station boiler soot blowers.
27. 为防止锅炉受热面泄漏,可在电站锅炉吹灰器吹损的管壁表面喷涂耐磨涂层。
To prevent the leakage of power station boiler, the coating resistant to abrasion was prepared on the tube surface damaged by the power station boiler soot blowers.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
