加劲肋用英语怎么说,加劲肋的英文翻译


词语导航

基本信息

词语:加劲肋

繁体:加勁肋

拼音:jiā jìn lèi

英语翻译

【化】 stiffening rib

分词翻译

加劲的英语翻译:

【化】 stiffening

肋的英语翻译:

costal region; rib
【医】 costa; costae; costo-; rib

翻译例句

1. 最后提出了加劲肋设计公式,供工程参考。

In the end, the design formula of stiffener is put forward which can supply reference to engineering.

2. 加劲肋不要过高、过窄,因为这会造成材料流动困难。

Ribs should not be high or narrow; this makes it difficult for the material to flow.

3. 刚性横梁(8)的高度在侧边加劲肋板(2)顶部之上。

The height of the rigid crossbeam (8) is arranged above the top part of the side stiffening rib plate (2).

4. 试验结果表明,十字加劲肋钢板剪力墙具有较好耗能能力及延性。

The test results shows that good energy dissipation and displacement ductility capacities can be achieved.

5. 此外,采用波纹钢腹板就避免了平钢腹板中通常都要布置的加劲肋。

Besides, adopting corrugated steel web can save the stiffening ribs, which usually need to be added in flat steel web.

6. 计算长度的取值正确与否,将直接影响到支承加劲肋的稳定性验算。

Whether correct or not this will affect the calculation of the overall stability of bearing stiffeners directly.

7. 两侧加劲肋可以有效地提高试件的承载力,并对试件耗能性能有影响。

Both sides stiffening rib could effectively improve specimens" supporting capacity and has a influence on energy dissipation property.

8. 垂直加劲肋节点适于柱截面较小的方钢管(矩形管)柱和H型钢梁节点。

The vertical stiffener connection is suitable for rectangular steel tube column that the sectional area is smaller and H-steel beam connections.

9. 身体:从挤压铝,刚性,重量轻,坚固的设计,制造内部加劲肋支持运输。

Body: Made from extruded aluminum, rigid, light weight, rigid design, internal stiffening ribs support carriage.

10. 垂直加劲肋节点适用于柱截面较小的方钢管(矩形管)柱和H型钢梁节点。

A vertical stiffening rib joint is suitable for rectangular steel tube column with smaller section to H-beam connection.

11. 加劲板模型可包含多种加劲肋形状,推导过程中计入焊接残余变形的影响。

The panel can be composed of various shapes of stiffeners. Post-weld initial deflection is considered during the process.

12. 对纵向加劲肋的构造影响进行了参数分析,开讨论了纵向加劲肋的合理构造。WWW.WENtIYi.coM

The structural parameters of longitudinal stiffening rib are studied, and the reasonable parameters for which is also discussed.

13. 研究了柱加劲肋、螺栓排列、螺栓数目、槽钢宽度和槽钢下伸长度等的影响。

Effects of column stiffeners, bolt arrangement, bolt number, U-steel width and U-steel extended length are studied.

14. 研究焊缝长度、加劲肋和横隔板等对腹板应力的影响,探讨锚固区设计的进一步优化。

For further optimization design, the influences of weld length, stiffening rib and diaphragm plate for the web stresses distribution are studied and compared.

15. 当两种桥面板获得的总体受力性能接近时,夹层桥面板可以大大减少加劲肋的数量。

While both decks obtain the similar overall mechanical performance, the SPS decks just need relatively less longitudinal stiffeners.

16. 在循环加载试验中首次综合探讨了柱轴力大小、加劲肋构造措施等对连接性能的影响。

Effects of column axial force and rib stiffener on hysteretic behavior of connections were synthetically considered for the first time during cyclic-loading.

17. 算例表明,应用所给出计算式,能较容易地解决门式刚架构件设置腹板加劲肋的问题。

Examples show that by using the calculating formulas, the problems of arranging web stiffeners in structural members of gabled frames can be easily solved.

18. 同时,采用不同钢材、不同厚度和加劲肋形式,可以获得不同的承载力、延性和耗能能力。

At the same time, by using different steel, thickness, stiffening ribs, we could have different strength, ductility and energy dissipation capacity.

19. 分析了节点端板厚度、螺栓类型、端板的加劲肋等因素对节点刚度以及抗弯承载力的影响。

The factors, such as end -plate thickness, bolt"s types , beam and column " flank , that can effect on the joint rigidity and moment capability, are analyzed.

20. 为了提高腹板的临界应力,通常都设有腹板横向加劲肋,有时还在梁中段加设纵向加劲肋。

To raise the critical stress of the web, we always lay some transverse stiffeners on the web, and also lay some longitudinal stiffeners sometime.

21. 同时,对高腹板结构设计进行了研究,对竖向与水平加劲肋的刚度及稳定性进行了计算分析。

At the same time, the high web structure was researched, and the deformation and stability of the vertical and level stiffener was analyzed.

22. 在这种情况下,为了提高桥面板的承载能力,在桥面板纵向布置加劲肋成为一种新的构造措施。

In this case, there is a new structural measure that setting lengthways stiffened bars under the bridge deck slab in order to improve the loading ability of the bridge deck slab.

23. 利用能量法分析了加肋平板的稳定问题,推导了纵向临界力的计算公式,并探讨加劲肋的合理布置。

The paper analyses the stability of rib slab on method of energy, the formula of longitudinal critical force is deduced, and rational arrangement of stiffening rib is discussed.

24. 现行钢结构设计规范(GB50017- 2003)规定梁的支承加劲肋计算长度取腹板高度。

Effective length of bearing stiffeners of steel girders has been taken as the web depth in the current Code for design of steel structures (GB50017-2003).

25. 最后着重介绍的设计要点有:横向抗倾覆稳定计算、纵向加劲肋设置、横梁计算、人孔设置、钢结构涂装等。

Finally, several design points were emphasized such as transverse anti-overturning stability calculation, vertical stiffener layout, beam calculation, manhole and steel structure coating, etc.

26. 本文介绍了梁柱端板连接的一种满足某种建筑要求的加劲方法,即采用槽钢代替传统的加劲方式作为加劲肋。

This paper based on the theory of Cold Roll Forming for groove steel, discuss the methods for confirming the figures and the dimension for groove steel.

27. 本文根据试验和理论的分析结果,并参考相关设计规程,给出了外隔板式节点、垂直加劲肋式节点的设计建议。

The dissertation gives out the suggestion of outer diaphragm and flange stiffened joints based on the test, the academic analysis results and relative design codes.

28. 本文根据试验和理论的分析结果,并参考相关设计规程,给出了外隔板式节点、垂直加劲肋式节点的设计建议。

The dissertation gives out the suggestion of outer diaphragm and flange stiffened joints based on the test, the academic analysis results and relative design codes.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!