支路法用英语怎么说,支路法的英文翻译


词语导航

基本信息

词语:支路法

繁体:支路法

拼音:zhī lù fǎ

英语翻译

【电】 branching

分词翻译

支路的英语翻译:

spur track
【计】 tributary channel
【化】 branch; by-pass

法的英语翻译:

dharma; divisor; follow; law; standard
【医】 method
【经】 law

翻译例句

1. 电路的一般分析方法有许多,如支路法、节点法、网孔法和回路法等。

There are many methods for analysing electronic circuit, such as branch current, node voltage, mesh current and loop current method.

2. 自导纳。互导纳的工作代之以一些很简单的求导运算。它与传流的支路法。回路法。节点法相比更加易于掌握。

Instead very simple derivation operation is used. It is easy to grasp this method compared with branch current method, loop current method or nod voltage method.

3. 采用高斯消去法和欠松弛迭代法并应用计算机对这些方程进行数值求解,从而计算出各支路的流量。

The equations are solved numerically using the method of Gauss elimination and under-relaxation iteration by computor, thus the air flows in every branch are determined.

4. 使用了支路追加法和导纳矩阵求逆法来形成节点阻抗矩阵,给出了两种算法的数学模型,分析了算法各自的特点和优势。

The aim of the paper is to receive nodal impedance matrix by adding - branch line algorithm and admittance matrix algorithm, to analyze the effect of them, and to provide the models.

5. 但是基本的回路分析法不能用于处理含有电流源支路的回路分析问题。

But fundamental loop analysis method can not be used for approaching the loop analysis problems of the loop containing current source branch.

6. 在电力系统静态安全分析中,静态N - 1支路开断模拟的主要分析方法有直流潮流法、补偿法以及灵敏度分析法等。

In static security analysis, the principal methods for static N-1 branch outage simulation include DC power method, compensation method and sensitivity analysis method.

7. 以回路电流法为基础,选定某一定子绕组为基准绕组,列写了用矩阵形式表示的、计算回路电流及支路电流的网络方程。

The network equations based on loop current method and expressed in matrix form are established, and the loop currents, then the brance currents, can be calculated by the equations.

8. 采用了频谱分析法和电压过零点控制相应的滤波支路投入运行。

Frequency spectrum analysis and the crossing point of voltage are adopted to control the corresponding filter branch switch.

9. 本文将故障验证技术中的伪电路法和支路诊断法结合起来,提出了线性模拟电路故障诊断的分组诊断法。WWW.wEntiyi.coM

Based on the methods of pseudo circuit and branch diagnosis, a grouping diagnosis for the fault in a linear analog circuit is proposed.

10. 针对电压稳定概率评估中难以考虑支路故障随机性的问题,提出了基于点估计法的电压稳定分析方法。

The problem of taking random branch outages into account in probabilistic evaluation of voltage stability is studied, and an efficient point estimate method based is proposed.

11. 目前广泛使用的低频信号检测法容易受到直流系统支路中存在的对地分布电容和环网的影响。

The detection method of low frequency signal injection, which is widely used, is easily influenced by the capacitors between ground and each branch and by the ring net.

12. 当电路的支路数目较多而节点数目较少时,运用节点电压法是一种更好的选择。

When the leg number of circuit is big and the node point number is small, it is a better choice to use the node voltage method.

13. 为研究含TCSC的电力系统的稳定性和动态特性及设计TCSC的实用化控制策略,提出了计及电抗器支路电阻影响并结合动态相量法的TCSC建模方法。

To better understand and control the interactions between TCSC and power system, a kind of dynamic phasors model of TCSC considering resistance influence of reactor branch is proposed.

14. 然后应用电路定律和电路网络分析的支路电流法进行分析,得出了基于电路网络分析的运动链同构判定依据,最后结合实例说明了运动链的同构判定方法。

Then the isomorphism judgment criterion based on the circuit analysis is obtained by applying the circuit laws and the method of branch current to the circuit models.

15. 然后,采用相量法求解出正弦电压激励下各并联支路的电流;

Then, the current of the paralleled branch coils excited by sine voltage is obtained by way of phasor.

16. 本文系统地阐叙了大规模RLC电路的计算机网络分析方法,即利用改进的节点电压法求rlc电路的节点电压、支路电流和支路电压。

In this thesis, network analyzing method is introduced for large scale RLC circuits. That is to say, making use of improved nodal analysis can get nodal voltage, branch current and branch voltage.

17. 利用基于拉普拉斯谱划分的递归二分法将电力网络进行支路切割,然后将支路切割转换为节点撕裂。

By means of Laplacian spectrum recursive bisection partitioning method, firstly the power network is partitioned into branch-cut form; then the branch-cut form is changed into node-split form.

18. 现在解决轮断问题的的方法主要是补偿法,但该方法还无法有效解决系统同时断开大于等于三条支路的情况。

Now the main solution for the break in turn is compensation method. However, it can"t solve the situations when the Numbers of circuits broken in system is more than or equal to three.

19. 根据限流措施优化配置问题的特点,提出先对候选可开断支路采用枚举法求解支路开断的优化方案,再采用改进离散粒子群算法(MDPSO)求解综合限流方案。

An enumeration method was used to get the optimal splitting of the candidate branches. A modified discrete particle swarm optimization algorithm (MDPSO) was used to get the final strategy.

20. 本文以关键线路法为基础,根据图论理论,给出一种支路节点压力通风网络调节计算方法。

In this paper, based on CPM method, a regulating and calculating method of pressure is given on a branch junction head in the mine ventilation network in accordance with graphic theory.

21. 本文采用了一种常态下利用双不对称电桥实时监测直流系统绝缘的方法,解决了上述问题。目前广泛使用的低频信号注入法容易受到直流系统支路中存在的对地分布电容的影响。

A new method of monitoring real-timely for DC system insulation using double asymmetrical Bridges in normal mode is adopted in this paper, and the shortcomings of symmetrical bridge are overcome.

22. 本文采用了一种常态下利用双不对称电桥实时监测直流系统绝缘的方法,解决了上述问题。目前广泛使用的低频信号注入法容易受到直流系统支路中存在的对地分布电容的影响。

A new method of monitoring real-timely for DC system insulation using double asymmetrical Bridges in normal mode is adopted in this paper, and the shortcomings of symmetrical bridge are overcome.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!