球形阀用英语怎么说,球形阀的英文翻译


词语导航

基本信息

词语:球形阀

繁体:球形閥

拼音:qiú xíng fá

英语翻译

【机】 screwed valve

相关词条

1.globebodyvalve  2.ballvalve  3.globecock  4.ballcock  5.globevalve  6.ballclack  7.balltypevalve  

分词翻译

球形的英语翻译:

roundness; sphericity

阀的英语翻译:

clique; valve
【化】 valve
【医】 limen; limina; valve

翻译例句

1. 它将可取代闸阀、截止阀及球形阀。

It will be replaced valve, the cut-off valve and ball valve.

2. 它将可取代闸阀、截止阀及球形阀。

It will be replaced by valve, the cut-off valve and ball valve.

3. 当一个最漂亮的球形阀本身没有任何过错。

There"s nothing wrong with being the prettiest ballcock valve.

4. 并在理论上探讨将锥形阀瓣改为球形阀瓣,提高密封面的稳定性。

It also approach theoretically to change the conical valve gag into globe valve gag to raise the stability of the seal plate.

5. 阐述了高性能截止阀的结构特点及工作原理,介绍了球形阀瓣工作行程的计算公式。

This article elaborates the structural feature and operating principle of the high performance stop valve and to introduce the calculative formulas of working movement of the globe disk.

6. 球形阀阀座磨损后,可用一钢球放到阀座上,用金属棒轻轻敲击钢球数次,直到球阀与阀座密合为止。

After the ball valve seat wear and tear, can be a ball into the seat, and with the rod lightly tapping ball several times, until the valve with the valve seat up close together.

7. 形端口阀内件截止阀比塞形阀瓣或球形阀瓣截止阀具有更加线性的节流曲线,但是,所有这些类型的截止阀都不建议连续用于严格的节流应用中,这种情况可能需要采用控制阀。

V-port trim has a more linear throttling curve than plug or ball discs, but none of these trims are recommended for continuous severe throttling which may require using a control valve.

8. 重力球形止回阀可以变为通风阀,只需用漂浮球体更换标准球体,然后在安装时将阀门倒置,使其阀座向上即可。

Gravity ball check valves are converted to vent valves by replacing the standard ball with a floater ball and inverting the valve at installation-with seat up.

9. 注意:这种阀门是采用两个球形制动器实现静电接地,确保阀杆阀体和球体之间的电镀连续性。

Note: Valves are static grounded by two ball detents that insure electro-continuity between the stem body and ball.

10. 球形逆止阀能够允许液体单向通过,防止回流,适用于提升阀不是用的应用条件。

Ball check valves allow free flow in only one direction, prevent backflow, and are for applications where poppet style valves may not be suitable.

11. 泵阀件采用带导向杆的半球形柱塞结构,弹簧制动,精确控制阀球与阀座对中,启闭动作及时。

The pump valve has a structure of semi-spheric plunger with guide rod, and its seat and ball are aligned by means of a spring, and it is opened and closed in time.WwW.wEnTIYI.COm

12. 锻钢止回阀阀瓣形式还分别有截流形,针形,球形您可以根据实际情况合理选用我们的阀门。

Forged steel check valve is respectively cut manifold, needle, ball you can according to the actual situation of reasonable selection of our valves.

13. 我们建议采用型号DET膨胀罐,美国瓦茨Governor 80球形旋塞带整体热膨胀安全阀,或一个530C刻度压力安全阀。

We suggest the use of a model DET expansion tank, the Watts Governor 80 ball cock with integral thermal expansion relief valve, or a 530C calibrated pressure relief valve.

14. 我们建议采用型号DET膨胀罐,美国瓦茨Governor 80球形旋塞带整体热膨胀安全阀,或一个530C刻度压力安全阀。

We suggest the use of a model DET expansion tank, the Watts Governor 80 ball cock with integral thermal expansion relief valve, or a 530C calibrated pressure relief valve.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!