
词语导航
基本信息
词语:保压时间
繁体:保壓時間
拼音:bǎo yā shí jiān
英语翻译
【化】 hold time; holding time; pressure hold time; pressure holding time
分词翻译
保压的英语翻译:
【化】 pressure holded时间的英语翻译:
hour; time; when; while【化】 time
【医】 tempo-; time
【经】 time
翻译例句
1. 变量泵可在长的保压时间内节省能源。
A variable displacement pump could save energy during the long holding time.
2. 降低注塑压力,减少成型和保压时间。
Lower to note the pressure of mold, reduce to model and protect to press time.
3. 保压时间太短:重量不足,产品内部空洞,尺寸偏小。
Too short holding time: Not enough weight, empty inside, small dimension.
4. 其中保压时间、冷却时间及保压压力是最重要的因子。
The packing time, cooling time and packing pressure are the most important factors.
5. 适当提高注射速率和减少保压时间也可减小制品翘曲。
Moreover, fast filling and less time for holding were also dedicated to reduce the warpage of product…
6. 在同样的压型压力下,保压时间对合金性能的影响较弱。
The influence of dwell time for alloy performance is weak comparatively.
7. 该输氧器结构简单、安全可靠、贮氧量大、保压时间长。
The oxygen respirator is with simple structure, high reliability, large oxygen storage and long time for keeping pressure.
8. 保压时间的确定以浇口冷凝为依据。通过产品称重来确定。
Holding time is determined by the solidification time of the gate. We decide it according to the weight.
9. 保压时间大约是冷却时间的80%,冷却时间常常小于其设定值。
The packing time is about 80% of the cooling time which itself is often less than that which is set.
10. 随着保压时间延长和温度升高,梨汁中PPO相对活性逐渐降低。
The activity of PPO in juice decreased step by step with the increasing of heating temperature and pressure holding time.
11. 压药压力、加压速度、保压时间等重要工艺参数都直接影响其质量。
The important parameters such as pressing powder pressure, pressing speed and holding pressure time etc, will affect directly the quality of initiating explosive device.
12. 压力、行程、速度、保压时间、闭合高度均可按需求调整,方便操作;
The pressure, stroke, speed, dwell time and shut height can be adjusted according to request, allowing for convenient operation;
13. 随着保压时间的延长和温度的升高,桃汁中多酚氧化酶相对活性逐渐降低。
The activity of PPO in the juice decreased gradually with the rise of heating temperature and the extension of pressure holding time.
14. 方法一:换上新的止回阀,延长保压时间依然没有料垫,则说明料筒损坏。
Method 1: Change into a new non-return valve; prolong the holding time, if there is still no melt cushion, it means the cylinder is broken.
15. 挤压成型过程中原材料、挤压力、保压时间和成型温度对制品的品质影响较大。
The raw materials, extrusion pressure, pressure holding time and molding temperature during extrusion moulding have great effects on the quality of products.
16. 结果表明:I阶段保压时间对泡孔直径及泡孔密度的影响大于II 阶段保压时间;
The results indicate: the effect of packing time at stage I on cell diameter and cell density is greater than that of the packing time at stage II;
17. 之后对混合粉进行冷压制坯,发现压制压力、加压速度和保压时间对冷压坯的密度都有重要影响。
The cold-pressed compacts have been made of such WCu powders, and it is found that the pressure force and loading speed have important effects on the relative density of the compacts.
18. 试验结果表明:热压温度、保压时间等工艺参数对梯度合金的热压致密化及梯度组织的形成有着明显的影响;
The results show that a continuous gradient distribution of Co could be obtained by controlling the hot pressing parameters.
19. 结果表明:温度、压力和保压时间对灭活大肠杆菌影响显著,升压速度和卸压速度对灭活大肠杆菌影响不显著。
Result showed that the pressure, temperature and pressure holding time were the major affecting factors for high hydrostatic pressure inactivation while the ramp rate and depressurization rate not.
20. 针对金刚石两面顶液压机吨位高、做功行程小、保压时间长的特点,介绍了一种新型节能两面顶金刚石液压机。
Due to the features of advantageous like high capacity, short working stroke, long holdup time, a novel energy - saving hydraulic press is presented.
21. 保压间就是产品重量开始稳定时的时间。
The holding time will be the time when the part weight start to be stable.
22. 在保压阶段采用了压力随时间成正比下降的近似PVT控制。Www.wENtiyi.COm
An approximate PVT control making pressure to decrease proportionally to time is adopted for holding pressure.
23. 对掺加粘结剂的脱硫石膏的凝结时间、压折强度、保水性能、剪切粘结强度的测试。
Testing the setting time, flexural strength, compressive strength, water retention, adhesive strength of gypsum with the adhesive agents.
24. 输入预压、波头、焊接时间、保压、焊接电流等参数。
Input preloading, wave head, welding time, the pressure, welding current parameters.
25. 随成型压力的增加,当保压一定时间、添加一定量助烧剂时,生坯密度随之增加,饱和磁化强度也相应提高。
With the increase of molding pressure, holding pressure for certain time and adding a certain amount of boric acid doping, the compact density and saturation magnetization correspondingly increase.
26. 结果表明:随着温压温度、压制时间以及保压压力的提高,黏结复合磁体的磁性能呈现先增大后减小的趋势。
The results show that the magnetic properties firstly increase and then decrease with the increase of temperature, pressure and time.
27. 结果表明:随着温压温度、压制时间以及保压压力的提高,黏结复合磁体的磁性能呈现先增大后减小的趋势。
The results show that the magnetic properties firstly increase and then decrease with the increase of temperature, pressure and time.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
