脆性断裂用英语怎么说,脆性断裂的英文翻译


词语导航

基本信息

词语:脆性断裂

繁体:脆性斷裂

拼音:cuì xìng duàn liè

英语翻译

【化】 brittle rupture

分词翻译

断裂的英语翻译:

part; rupture
【计】 break-away; breakout
【化】 breakage; cracking; failure breaking; fracture
【医】 fragmentation

翻译例句

1. 出现小裂纹必然是脆性断裂的前兆。

Crazing is the invariable precursor of brittle fracture.

2. 此属于解理和准解理脆性断裂。

The rupture is brittle cleavage fracture.

3. 本复合材料断裂表现为脆性断裂。

The fracture mechanism of this composite was brittle fracture.

4. 脆性断裂则形成岩石状花样。

And rocky pattern meams brittle fracture.

5. 细化晶粒可抑制脆性断裂。

Crystalline fining grain can restrain the cleavage fracture.

6. 涂层磨损机制主要为犁沟切削和脆性断裂。

Wear mechanisms of coating was mainly micro-ploughing and brittle fracture.

7. 钻杆接头的各种纵向开裂属于低应力脆性断裂。

Longitudinal crack of drill pipe box joint is brittle fracture at low stress.

8. 引起脆性断裂的原因是成型模产生了回火脆性。

The fracture is brittle fracture, and the reason is that material of forming dies takes place the temper brittleness.

9. 气体分馏装置脱乙烷塔顶冷却器浮头螺栓,半数发生脆性断裂。

Half the number of bolts in floating head of deethanizer overhead cooler were brittle fractured.

10. 利用弥散裂缝理论,提出了压实黏土拉伸状态下的脆性断裂模型。

Based on the smeared cracking theory, a brittle fracture model for tensile state of compacted cohesive soil is proposed.

11. 为工程中的裂纹体的脆性断裂分析与评定,提供了必要的计算依据。

The results of this peper provide a basis for the analyses and judgements for problems of brittle fracture in engineering fracture problems.

12. 干态试样的断裂形式都为脆性断裂,湿态试样只有在高温下未发生断裂。

The fracture mode of dry samples is all brittle fracture; Wet samples are not fracture only at high temperature.

13. 叉车货叉失效方式主要表现为塑性变形超差,脆性断裂和早期疲劳断裂。

Fork failure of a forklift truck mainly takes a form of plastic deformation exceeding allowable limit, fragile breakage and early stage fatigue breakage.Www.wenTiyI.COm

14. 断裂形貌考察表明,POM/NBR共混物的断裂面呈脆性断裂特征;

The impact fracture surface showed a tough morphology for POM/NBR/Novolak blends and brittle one for POM/NBR blends.

15. 论述了热轧过程中球墨铸铁复合轧辊的掉皮破损属于疲劳脆性断裂的原因。

It is recognized that the scaling failure of nodular iron composite rolls in hot rolling is a problem of fatigue brittle fracture.

16. 综述和简要评价了晶界偏聚和材料脆性断裂之间关系的理论研究进展情况。

An overview of the recent progress in the theoretical study of relationship between grain-boundary segregation and brittle fracture is provided.

17. 首次提出了变形局部化的形成与演化是材料准脆性断裂主要内因的新见解。

A new view that the formation and evolution of the deformed part is the main internal cause of stress fracturing material is firstly put forward.

18. 这种界面冶金结合层并不会引起脆性断裂,具有与基材相同的韧性断口形貌。

The interface layer of metallurgical bonding will not induce brittle fracture and will share the ductile SEM fractographs of the substrate.

19. 前两种为脆性断裂方式,热解炭基体的断裂应变是这类材料强度的控制因素。

The former two types are brittle ones, and the fracture strain of pyrolytic carbon matrix is the controlling factor of the strength.

20. 金矿化的构造控制作用主要体现为剪切带的动力作用和脆性断裂作用两方面。

The structural controlling in mineralization mainly results from driving force in shear zone and fracturing.

21. 结果表明,该阀体爆裂属脆性断裂,爆裂系截止阀材质、组织及铸造质量差所致。

It was concluded that brittle fracture of the valve body was the result of poor casting quality.

22. 结果表明所给出的单奇异性V形切口的脆性断裂准则有效、简单且便于工程应用。

The findings indicate that the brittle fracture criterion for V-notches with single singularity is valid and simple, so it can be applied to engineering conveniently.

23. 本文介绍了焊接残余应力对金属结构的静强度、脆性断裂以及应力腐蚀开裂的影响。

The paper discusses over the influence exerted by welding residual stress on the static strength, brittle fracture and stress-corrosion cracking of metal structure.

24. 结果表明,钢丝热浸镀时走速过快和镀层不均匀是导致扭转脆性断裂的主要原因。

And quick wire movement during hot-dipping and inhomogeneous coating was identified as the main cause.

25. 灰斑的存在易导致接头的脆性断裂。因此,控制灰斑对保证钢轨接触焊质量举足轻重。

The existence of grey spot may cause brittle crack of the joint, therefore, controlling grey spot occupy a decisive position to ensure the quality of rail resistance welding.

26. 电镜图片表明,纯环氧树脂断裂面呈现明显的脆性断裂,而改性环氧树脂为韧性断裂。

It show that the fracture surface of pure epoxy resin appears brittle fracture, but the modified epoxy resin appears gliding fracture.

27. 材料的断裂方式由沿晶脆性断裂转变为沿晶脆性断裂和韧窝韧性断裂的混合断裂方式。

The fracture of the material was diverted from the manner of intergranular brittle fracture to the manner of intergranular brittle fracture with dimple gliding fracture.

28. 钠腐蚀后,两种钨试样的沿晶脆断特征变得更为显著,为沿晶和穿晶混合型脆性断裂。

The brittle morphologies become much more notable, and appear the inter-and trans-granular fracture mode after sodium corrosion at high temperature for both of W-specimens.

29. 钠腐蚀后,两种钨试样的沿晶脆断特征变得更为显著,为沿晶和穿晶混合型脆性断裂。

The brittle morphologies become much more notable, and appear the inter-and trans-granular fracture mode after sodium corrosion at high temperature for both of W-specimens.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!