
词语导航
基本信息
词语:丙烯基
繁体:丙烯基
拼音:bǐng xī jī
英语翻译
【化】 propenyl【医】 allyl; propenyl
分词翻译
丙的英语翻译:
third烯基的英语翻译:
【化】 alkenyl翻译例句
1. 研究了新的仿生农用杀菌剂邻丙烯基苯酚的残留分析方法及其在番茄中的消解动态和最终残留。
The method of residue analysis of a new synthesized fungicide 2 propenylphenol simulated the active structure in Gingko biloba L.WWw.WEnTIyI.COM
2. 本文介绍了从十字花科植物芥菜种籽中提取丙烯基芥末油的方法并对其生产工艺进行了新的研究。
This essay studies the extraction of the allyl mustard oil from the leaf mustard seeds, a kind of plant of the mustard family and does further new probe in method.
3. 对甲基异丙烯基酮的合成工艺进行了改进,比较了在不同温度下,对醇酮中间体和脱水反应收率的影响。
Improvement of synthesis process of methyl isopropenyl ketone was introduced, and the yields in different temperature was compared.
4. 结论丙烯基硫脲可抑制酚氧化酶活性而对钉螺、螺卵的成活及其产卵量、卵壳的形成、孵化率均有影响。
It is concluded that acryl thiourea effects not only snail eggs, but also their rates of egg-laying, its egg shell and the rate of breeding.
5. 通过用聚丙烯微孔膜含浸混合单体然后原位共聚合的方法成功地制得了新型聚丙烯基互穿聚合物网络复合膜。
A novel polypropylene based interpenetrating polymer networks (IPN) was prepared via insitu copolymerization of mixed monomers within the pores of a microporous polypropylene membrane.
6. 用熔融共混法制备出聚丙烯基纳米复合材料,研究了形状和大小不同的纳米介孔MCM - 41填充物对聚丙烯基纳米复合材料的拉伸性能与热性能的影响。
The influences of the different shape and the different size of nano-sized mesoporous MCM-41 on the tensile properties and thermo-stability were investigated.
7. 如今研究人员创造的胶囊是通过把氰基丙烯酸正丁酯和有愈合功效的化合物悬浮其中的油类混合而制的。
The capsules the researchers have come up with are made by mixing butylcyanoacrylate, a chemical found in superglue, with an oil carrying the healing compounds.
8. 首席研究员戴维-基平说:“比煤炭或者是最黑的丙烯酸颜料反射性还小——这让它成为迄今为止发现的最暗的行星。”
"Being less reflective than coal or even the blackest acrylic paint-this makes it by far the darkest planet ever discovered," lead study author David Kipping said.
9. 聚丙烯纤维作为各种纤维材料中的一种,以其极好的化学稳定性和优良的技术经济性能,在水泥基复合材料中得到日益广泛的应用。
Polypropylene fiber is a kind of all kinds of fiber materials, with its perfect chemical stability and excellent technical and economic performance, is widely used in cement based composite materials.
10. 每个微滴都有一颗油核,周围包裹着一层薄薄的氰基丙烯酸正丁酯。
Each droplet has an oil core surrounded by a thin layer of butyl cyanoacrylate.
11. 合成了铕-磺基水杨酸-邻菲咯啉配合物和水性丙烯酸酯共聚物。
The complex of Europium with sulfosalicylic acid and phenanthroline asas waterborne - polymer of acrylate has been synthesized.
12. 在超选微导管置入后,向撕裂血管的近端或损伤血管的残端轻缓注入N-羟丁基2-氰基丙烯酸酯(NBCA。
N-butyl 2- cyanoacrylate (NBCA) is gently deposited proximally to the arterial tear or at the level of the stump of the traumatized artery after superselective microcatheterization.
13. 氰基丙烯酸酯粘合剂如误入眼部,将粘附于眼部蛋白质之上,而后通常在数小时之内陆续脱落。
Cyanoacrylate introduced into the eyes will attach it self to the eye protein and well disassociate form it over intermittent periods, generally covering several hours.
14. 目的:探讨微波加热法处理聚甲基丙烯酸甲酯(pmma)基托材料的力学性能。
Objective: To study the mechanical properties of microwave cured polymethylmethacrylate (PMMA) denture base resins.
15. 用自由基化学接枝共聚的方法制作聚丙烯香烟滤材,以提高其表面能,增加自粘性。
The polypropylene used for making cigarette filters was prepared with the process of free radical graft copolymerization in order to raise the selfadhesive power and surface energy of the PP.
16. 采用熔融法把纳米钠基蒙脱土填充到聚丙烯中。
The nano Na-montmorillonite was filled into PP by melting method.
17. 结果发现,通过丙酮溶解丙烯酸树脂基有机释放膜,可获得厚度十分均匀的铝膜或铝鳞片。
Result shows that the organic releasing film basing on propanone dissolved acrylic resin can give aluminum film or aluminum flake with uniform thickness.
18. 目的:比较钛合金与甲基丙烯酸脂义齿基托表面细菌粘附的差异性。
Objective: To compare the difference of bacteriology between titanium alloy base and methyl methacrylate base.
19. 利用凝胶纺丝方法制备了聚丙烯腈基碳纤维原丝。
The PAN-based carbon fiber precursor was prepared with gel spinning method.
20. 以聚丙烯为基料,POE为增韧剂,活化滑石粉为增强剂,研制出了冰箱压缩机后罩专用料。
Using PP as matrix resin, POE as toughener, activated talc as reinforcer, compound for back cover of refrigerator compressor is prepared.
21. 本文合成了侧链上带有酰胺基、羧基、酯基和羟基的水溶性聚丙烯酸树脂。
A water soluble acrylic coatings with amide, carboxyl, ester and hydroxyl group on side-chain have been synthesized.
22. 在氮气保护下,反应不能引发丙烯酰胺聚合,说明在反应中没有自由基产生。
Under the protection of nitrogen the reaction system does not induce polymerization of acrylamide indicating no generation of free radicals.
23. 文章探讨了聚丙烯腈基碳纤维的生产技术、形成机理,阐明了碳纤维的主要用途及广阔的发展前景。
The production technique and forming mechanism of polyacrylonitrile carbon fibre are discussed and the main use of carbon fibre as well as its vast development vistas are expounded.
24. 根据聚丙烯腈基碳纤维生产工艺路线,从原丝、 预氧化、碳化工艺及结构上分析了聚丙烯腈基碳纤维焦油形成的原因。
The reasons for tar formation from polyacrylonitrile-based carbon fiber were analyzed from the structure and the production line, from as-spun fiber, pre-oxidation to carbonization.
25. 本工作定量测定了2-乙烯基吡啶-甲基丙烯酸甲酯-铑络合物的烯烃催化加氢性能与共聚物配体序列结构的关系。
The quantitative relationships between the catalytic ability of Rh-complex of 2-vinyl pyridine-methyl methacrylate copolymer and the sequence structures of the copolymer ligands have been determined.
26. 研究了磷酸对聚丙烯腈基低温碳材料的改性作用。
Modification function of phosphoric acid to low temperature carbon based on polyacrylonitrile was investigated.
27. 介绍了聚丙烯腈基活性碳纤维的制备工艺和其制品开发的技术措施,并论述了活性碳纤维在医药及食品工业方面的应用。
The technique of making the active carbon fiber and the technical measure of developing its product were introduced, and its application in medical and food industry were expounded in this article.
28. 介绍了聚丙烯腈基活性碳纤维的制备工艺和其制品开发的技术措施,并论述了活性碳纤维在医药及食品工业方面的应用。
The technique of making the active carbon fiber and the technical measure of developing its product were introduced, and its application in medical and food industry were expounded in this article.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
