分析试验用英语怎么说,分析试验的英文翻译


词语导航

基本信息

词语:分析试验

繁体:分析試驗

拼音:fēn xī shì yàn

英语翻译

assaying

分词翻译

分析的英语翻译:

analyze; construe; analysis; assay
【计】 parser
【化】 analysis; assaying
【医】 analysis; anslyze
【经】 analyse

试验的英语翻译:

experiment; test; try; try on; try out; examination; experimentation; trial
trial run
【计】 breadboarding
【医】 probation; test; tria
【经】 test; trial

翻译例句

1. 此外还学习记录和分析试验结果。

They also learn to record and analyze test results.wwW.WentiYi.COM

2. 负责分析试验数据并编制技术报告。

Be responsible for analysis of test data and writing technical reports.

3. 金相组织、扫描电子显微镜分析试验。

Metallographic structure, Scanning electron microscope analysis test.

4. MacDonald将为研究和分析试验结果提供理论指导。

MacDonald will provide theoretical guidance for the studies and analysis of the experimental results.

5. 经过对材料的分析试验,发现其具有高温回火脆性。

By analytical testing the material discovered that it has high temperature temper embrittlement.

6. 对电渣重熔高速钢轧材方型偏析形成原因进行了分析试验。

The origin of square segregation in high speed tool steel bars in electroslag refining is analyzed.

7. 阐述了排刷式剥叶元件有限元分析试验平台设计的基本方法。

The basis method of the FEA experiment platform for cleaning element in brush shape is elaborated.

8. 通过故障检查、机理分析和逐级分析试验,最后找到了故障原因。

And the cause of the stabilization trouble is found by examining the trouble mechanism study and testing step by step.

9. 热分析试验表明,损伤对以硝酸酯为主的基体材料的热分解有影响。

The results of thermal analysis show that the damage affects thermal decomposition of nitrate(NG/BTTN).

10. 用来分析试验以从铅中分离贵重金属的用骨灰制成的小的多孔渗水的碗。

Small porous bowl made of bone ash used in assaying to separate precious metals from e. g. lead.

11. 本文还采用混合有限元法分析试验模型,并与试验结果进行了对比分析。

The model was analyzed by the mixed finite element method and comparison of theoretical and experimental results was also carried out.

12. 对复合材料氧乙炔烧蚀试验及其系列热分析试验的结果进行了计算和分析。

Many results of oxyancetylene. ablation experiments and systematic thermal analysis of some composites have been calculated and analyzed in this paper.

13. 提出了密度计法颗粒分析试验的一种曲线拟合及修正方法,经验证效果较好。

A curve fitting and revising methods to solve hydrometer grain analysis is presented, and proved good satisfactory.

14. 运用正交试验方法对半球形零件进行切削试验,采用方差分析法分析试验结果。

The machining experiment is made on semi-spherical part by orthogonal test method. The results of test are analyzed by variance analysis.

15. 在分析试验结果的基础上,提出了确定裂缝闭合弯矩(或应力)的力学模型和计算公式。

Based on the test results, the calculation model and the method for predicting crack closing moments (or stresses) are presented.

16. 在详细分析试验和有限元计算结果的基础上,提出了复杂应力状态下的低周疲劳寿命模型。

Based on experimental data and finite element analysis results, a low-cycle fatigue life model is proposed for the powder metallurgy superalloys under multiaxial stress states.

17. 分析试验结果表明,这些陶瓷涂层大幅度提高了基底金属在腐蚀介质及氧化环境中的寿命。

The results indicate that the ceramic coating films increase drastically the lifetime of the substrate metal in corrosive media and oxidizing atmosphere.

18. 在反应堆1:10模型上进行了堆芯吊篮结构的空气和静水中模态分析试验,获得动态特性。

After having completed the model analysis of the pressurized water reactor (PWR) core barrel in an 1:10 model, the dynamic characteristics are obtained.

19. 在反应堆1:10模型上进行了堆芯吊篮结构的空气和静水中模态分析试验,获得动态特性。

After having completed the model analysis of the pressurized water reactor (PWR) core barrel in anl: 10 model, the dynamic characteristics are obtained.

20. 分析了轮胎模态分析的试验方法及其在轮胎设计中的应用,并建立了轮胎模态分析试验系统。

The tire modal test and its application to the tire structure design were analysed, and a tire modal analysing test system was established.

21. 分析试验结果得出,对于表面刮削破碎和体积破碎两种岩石破碎状态,钻压对扭矩的影响不一样。

The result of experiment shows that the effect of weight on bit on the torque is different for two different conditions of surface scraping rock break and volume break.

22. 介绍了堆焊工艺试验,在分析试验结果、计算堆焊层稀释率的基础上,选定了合理的堆焊工艺规范。

The surfacing process test is introduced. Based on the analysis of test results and the calculation of dilution rate of surfacing layer, the reasonable surfacing specification is selected.

23. 应用可靠性设计方法,对超高压圆筒耐压试验压力进行探讨,定量分析试验压力与影响因素之间的关系。

In this paper, by using reliability design methods, the test pressure of ultrahigh cylinder is studied.

24. 本文对主梁的颤振导数识别,采用与主梁颤振分析试验相同的节段模型和测量装置,以自由振动法进行试验。

This paper makes use of free vibration method, using the same model and measuring device to identify the flutter derivatives of the girder.

25. 应用可靠性设计方法,对钢制外压圆筒形容器压力试验进行了研究,定量分析试验压力与影响因素之间的关系。

The test of external pressure is studied for steel-walled pressure cylinder by using reliability method. The relation of external pressure test and influencing factor is analyzed.

26. 方法:采用均匀设计与正交试验法,以外观评分和包封率评分为指标,综合分析试验结果来确定制备工艺条件。

METHODS: Taking the score of appearance and the score of drug embedding ratio as indexes, the technical conditions were determined by uniform design and orthogonal test.

27. 方法:采用均匀设计与正交试验法,以外观评分和包封率评分为指标,综合分析试验结果来确定制备工艺条件。

METHODS: Taking the score of appearance and the score of drug embedding ratio as indexes, the technical conditions were determined by uniform design and orthogonal test.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!