程控通信用英语怎么说,程控通信的英文翻译


词语导航

基本信息

词语:程控通信

繁体:程控通信

拼音:chéng kòng tōng xìn

英语翻译

【计】 programmed communication

分词翻译

程的英语翻译:

order; rule
【化】 range

控的英语翻译:

accuse; charge; control

通信的英语翻译:

communitcate by letter; correspond; correspondence
【计】 communication

翻译例句

1. 月球所具有的这一优势以及远程控制的机器人设备的使用,为在月球快速搭建基础通信设施提供了条件,也有利于协调全球范围对月球勘探和开发的管理运作。

These advantages, and use of robotic devices, will allow for a rapid build-up of lunar base facilities as well as world-wide coordination of exploration and development efforts.

2. 作为一种新兴业务,其计费系统与通信过程控制非常紧密地结合在一起。

As a kind of newly developing business, its charge system and communication course control are closely combined together.

3. SCPI规范化了所有的通信命令内容和格式,给程控仪器的软件开发提出更高要求。

The SCPI rules all the communication commands content and format, which brings forward the higher request to soft development of programmable instrument.

4. 介绍了串口编程技术,RS485总线驱动模式和RS485串口驱动程序。 然后在此基础上设计和实现了SDM300远程控制模块和异步信道的通信模块。

Findally, we implement SDM300 remote control module and Async communication module on the basis of introducing technology of serial programming , RS485 bus driving mode and RS485 serial driver.

5. 在工矿自动化远程控制通信中,一部分通信结构采用的RS485总线方式。

During the remote automatic control communication, the partial communication structure USES RS485 bus.

6. CAS通信自动化系统,综合布线、宽频网路、移动电话楼内覆盖系统、有线电视及数字程控电话系统。

CAS (communication Automation system) includes cabling system, broadband network system, mobile phone coverage system, cable TV and digital communication system.

7. 图1所示的存储控制模块MCB在数字程控交换机等通信设备和自动控制设备中得到大量应用。

The memory control block (MCB) shown in Fig. 1 is widely used in digital program-controlled switching systems, telecommunication equipments and other automatic control equipments.

8. MVB通信网络是为快速的过程控制优化的总线,且适合用作车辆总线,这就使得MVB逐渐成为下一代车辆的通讯总线标准。

MVB communication network is an optimized bus for control system, and it is suitable for vehicle bus. Then it is becoming the communication standard for future railway vehicles.

9. 在电力系统中,由于对通信的可靠性要求较高,因此程控数字交换机正在得到广泛的应用。

In electric power system, Digital Program Controlled Exchange has been used broadly because communications requests high reliability.

10. 该系统具有电子秤程控及远程通信的突出特点。

The system had the outstanding characteristics of program control to the electronic weighbridge and distant data-communication.

11. 在所考虑的离散分布控制系统中,每个可编程控制器作为一个控制结点,结点之间通过网络进行连接保持通信。

In the discrete distributed control system presented, each programmable logic controller is a control node and keeps communication with other nodes through network.

12. 介绍一种电力开关远程控制系统中基于单片机的通信系统协议的设计与实现。

In this paper, the design and implementation of communication protocol of remote control system for power switch is introduced.

13. 模拟器分为四个模块:线程控制模块,存储控制模块,通信控制模块和指令系统模块,分别实现。

The simulator is divided into four modules and realized separately: thread control module, memory control module, communication control module and instruction set module.

14. 以电路交换为基础的程控交换技术在当前的通信网中占有重要比重,它仍是当前通信的主要手段和研究内容。

The Digital Program Control Switch System, which based on the circuit switch, is still the main means of telecommunication field and plays an important role in the telecom network system.

15. 通讯:光纤、数字微波、卫星、程控交换、数据与多媒体等多种通信网络覆盖全区。

Telecommunication: a number of telecommunication networks as optical fiber, digital microwave, satellite, program control switching, data and multimedia cover the whole zone.

16. 以电路交换和数字程控交换技术为基础的电话网更是在整个通信网中占据着重要的地位。

The telephone network based on circuit-switching and digital program controlled exchanging technology plays an important role in the whole communicating networks.

17. 同时串行通信还应用于交通控制、分布数据采集系统、通信距离扩展、电力系统数据采集与控制系统、高速公路收费系统、远程控制、保密通信系统和教学实验等等。

At the same time, serial communication is also used in many other ways, such as transportation control, collecting system of distributive data, expanding the communication distance and so on.

18. 除渣机械手控制系统能够和上位机控制系统进行通信,从而保证整个自动浇注生产线在预定的生产流程控制下进行生产。

Slag manipulator control system can communicate with PC control system and can ensure the automatic casting production line work under the control of the production process.

19. 文章着重介绍了该操作系统的资源管理、多机通信、过程控制以及状态监视与故障处理等技术。

The paper discusses the resource management, interprocessor communication, process control, state monitor and error processing, which are important technical problems for RCDOS.

20. 整个调制解调器采用FPGA进行时序控制,采用DSP对CMB909进行编程控制、数据帧的打包以及和PC机的串口通信。

Modems used for the entire time series FPGA control, the use of DSP to CMB909 executable program control, data and images of the packaging and communications between PC machine and serial interface.

21. 在许多像计算机远程控制和数据采集这样的应用系统中,通信模块是必不可少的。

A communication module is a must in many applications such as remote control and data collections.

22. 然后以一小型锅炉为对象,以多协议转换器为核心设备,构建了能够兼容多种工业通信网络的小型过程控制系统。

Finally a small process control system, in which the core device was multi protocol converter and the controlled object was a small boiler, was constructed.

23. 说明:远程控制源代码,实现了一台通过网络通信 控制另外一台机器,可以用来进行调试使用。

Remote control the source code to achieve a network communication control another machine can be used for debugging use.

24. 本文在简要介绍某大型数字程控交换机系统的基础上叙述了其通信处理模块的研制与开发工作。

This paper describes the development and realization of CPM on the basis of introducing a large capacity digital SPC exchange system.

25. 建立程控交换电话网络实现电话通信需要大量的设备费、线路费、维护费和工程费等费用,并且需要一定的施工工期。

Instructing the switching network to realize the telephone communication needs much of equipment charges, lines charges, protection charges, project charges and time.

26. 升级交通信号就能让中央交通管理系统来远程控制它们,这比修建新道路便宜多了。

Upgrading traffic signals so they can be controlled remotely by a central traffic-management system is a lot cheaper than building new roads.

27. 在此基础上,针对变电站远程控制的安全需求,结合变电站自动化控制操作的动作序列,设计了变电站自动化远程控制的安全通信体系。

Based on this, by combining the operation sequence of control in substation automation, a security communication system of remote control for substation automation is designed.WWw.weNTIYI.COM

28. 采用CAN总线网络通信与集成技术,完成分布式远程控制和故障诊断。

Uses the CAN-Bus network correspondence and the integrated technology, completes the distributional long-distance control and the breakdown diagnosis.

29. 介绍一种基于串口通信,激光封装MEMS芯片的远程控制应用方案。

Based on serial port communication, a sort of long-distance control applications of MEMS packaging by laser was introduced.

30. 介绍一种基于串口通信,激光封装MEMS芯片的远程控制应用方案。

Based on serial port communication, a sort of long-distance control applications of MEMS packaging by laser was introduced.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!