
词语导航
基本信息
词语:程序的初始程序
繁体:程序的初始程序
拼音:chéng xù de chū shǐ chéng xù
英语翻译
【计】 routine initializer
分词翻译
程序的英语翻译:
formality; ground rule; procedure; proceeding; process; program
【计】 P; problem determination aid; PROC; program; related channel program
【化】 sequence
【经】 program; sequence
初始程序的英语翻译:
【计】 initial program
翻译例句
1. 因此,您在自己的小程序中承载转换器,这个程序在启动并初始化后将始终运行,可以随时通过远程API从任何程序对其进行调用。
So you host your converter in its own little program that starts up, initializes, and is always running and can always be called from any of your programs through a remote API.
2. 这是因为每个应用程序都需要一个主程序,而在缺省情况下并没有初始关联的用户程序。
This is because a main program is required for every application project, but, by default, no program is initially associated with it.
3. 这个表格包含中断与中断服务程序之间的处理器的映射,必须由程序员进行初始化。
This table contains the processor"s mapping between interrupts and interrupt service routines and must be initialized by the programmer.
4. 如果(或者一旦)企业初始产品可以得到利用,程序应该从这些产品开始,并获取需要执行程序的变更。
If (or once) the enterprise as-is artifacts are available, the program should start with these artifacts and capture the changes that are needed to implement the program.
5. 当应用程序正在初始化或者应用程序的工作负载增加时,应用程序的内存使用自然也将增加。
The memory usage of an application will naturally increase when the application is initializing and if the workload of the application increases.
6. 在应用程序启动期间执行的任务和分配的内存越多,应用程序准备的时间就越长,初始工作集就越大。
The more tasks performed and memory allocated during application startup, the longer before an application is ready and the larger the initial working set.
7. 它们也可以作为运行单元跨越程序的生命周期,并针对每个程序或方法条目重设初始值。
They can also span for the lifetime of a program as run units and are reset to their initial value on each program or method entry.
8. 如果应用程序已在运行,则TCP客户机将被初始化并把URL实参传递给在运行的RCP应用程序中等待收到此类通知的嵌入式TCP服务器。
If the application is already running, a TCP client would be initialized and pass the URL arguments to the embedded TCP server waiting to receive such notification in the running RCP application.
9. 它们允许您在应用程序中初始化一些变量或对象,然后在应用程序的其他位置使用。
They allow you to have variables or objects that can be initialized early in your application, and then can be leveraged anywhere in the application.
10. 一种在应用程序的时间敏感型部分避免类加载延迟通用技术是,在应用程序启动或初始化期间预先加载类。
A generic technique to avoid class-loading delays during the time-sensitive parts of your application is to preload classes during application startup or initialization.
11. 不佳的程序员,就好像不好的初始,程序本身就是一种挑战。
For bad programmers, like bad cooks, the mere mechanics of programming are challenging.
12. 初始化相应的HTTP模块后,ASP.NET引擎将确定为给定的请求调用哪个HTTP处理程序或HTTP处理程序工厂。
After initializing the appropriate HTTP modules, the ASP.NET engine determines what HTTP handler or HTTP handler factory to invoke for the given request.
13. 使用普通的聚合初始化程序时,缺少的值会被认为它们已经被初始化程序指定为0来处理。
As with a normal aggregate initializer, missing values are treated as though they"d been given 0 as an initializer.
14. 扩展处理程序遵循扩展处理程序生命周期:初始化、处理和销毁,发生的过程如下。
Extension handlers adhere to the extension handler lifecycle: initialization, handling, and destruction, which occurs as follows.
15. 它将为您“正确地”配置选中的模块(EJB或Web应用程序组件)并为选中的模块类型初始化和启动应用程序服务器。
It will do just "the right thing" for you to configure the selected module (EJB or Web application component), initialize and start the application server for the selected type of module.
16. 在进行初始化时,设备驱动程序会分配一个net _ device结构,然后使用必须的程序对其进行初始化。
At initialization time, a device driver allocates a net_device structure and then initializes it with its necessary routines.
17. 它涉及到加载一个初始ram磁盘(initrd),然后将控件传给一个名为init的程序,通常作为sysvinit包的一部分安装的一个程序。
It involves loading an initial ram disk (initrd) and then passing control to a program called init, a program that is usually installed as part of the sysvinit package.
18. 在图1的右侧显示了URL提供程序版面,列出了唯一一个被称为Default URL Provider的URL提供程序,他被包含在了初始applicationServer配置里面。
The right side of Figure 1 shows the URL Providers panel, listing a single URL provider named Default URL provider that is included in the initial Application Server configuration.
19. 当初始化支持RRD的应用程序的远程部分时,会使用与扩展处理程序描述符对应的ExtensionConfig解析对象启动每个扩展处理程序。
When the remote portion of an RRD-enabled application is initialized, each extension handler is initialized with a parsed ExtensionConfig object corresponding to the extension handler descriptor.Www.wEntiYI.cOm
20. 该小程序是一个bootloader,可以初始化附带的内存控制器,可能从某些外部源载入主程序,然后跳入主程序。
This tiny program is a bootloader that will initialize the attached memory controllers, possibly load the main program from some external source, and jump to it.
21. NUM_INITAGENTS参数决定空闲代理程序的初始数量,这些代理程序是在DB2START时在代理程序池中创建的。
The NUM_INITAGENTS parameter determines the initial number of idle agents that are created in the agent pool at DB2START time.
22. 应用程序的初始加载时间将明显少于部署非构建Dojo应用程序时所用的时间。
The initial load time for the application is reduced to fractions of what would be observed if you deployed with an un-built Dojo application.
23. 然而DB2通用驱动程序需要userID和口令,因为必须通过 DB2 通用驱动程序的初始身份验证,所以需要这些值。
However the DB2 Universal Driver that Network Server uses does require a userID and password. Since the initial verification done by the DB2 Universal Driver must be passed, these values are required.
24. 任何其它试图使用子系统的应用程序必须首先附加到共享内存区域并作为API初始化进程的一部分注册,所以pkcsslotd知道应用程序。
Any other applications attempting to use the subsystem must first attach to the Shared memory region and register as part of the API initialization process, so pkcsslotd is aware of the application.
25. 这意味着,尽管所有bundle在应用程序初始部署时都可以处于1.0.0版,但应用程序已被组装为支持这些bundle的未来更新。
What this means is that, while all the bundles can be at version 1.0.0 when the application is initially deployed, the application has been assembled to accommodate future updates of the bundles.
26. “类型转发”是指将类、结构、接口、委托或枚举的定义重新分配到从中进行初始定义的程序集以外的一个程序集。
Type forwarding means reassigning the definition of a class, structure, interface, delegate, or enumeration to an assembly other than the one in which it was originally defined.
27. 循环经常被用于进行数值运算的程序中,这种程序往往是有一个近似值作为初始值,然后逐渐迭代去改进以接近真实值。
Loops are often used in programs that compute numerical results by starting with an approximate answer and iteratively improving it.
28. 一小段程序。每次开机就自动地读入内存,然后,由它把操作系统的其余部分读入内存。可参阅初始化程序的装入。
Boot. A small routine, read into main memory when the computer is turned on, which reads the rest of the operating system into memory. See also initial program load.
29. 最后讨论了基于上述硬件系统的软件设计,主要分为三个部分:dsp的初始化程序、中断服务程序和语音编解码程序。
Finally, this paper discussed the software system design based on above hardware platform, including the DSP initialization program, the interrupt request service and speech coding.
30. 并阐述了该系统软件的关键部分:初始化子程序、发送子程序和接收子程序。
The key parts of the system software, which is composed of the initialization, transmission and receiver program, are described in details.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
