
词语导航
基本信息
词语:磨损机器
繁体:磨損機器
拼音:mó sǔn jī qì
英语翻译
【电】 abrasion machine
分词翻译
磨损的英语翻译:
wear and tear; abrasion; fray; fret
【计】 wear-out
【化】 abrasion and wear
【医】 abrade; abrasio; abrasion; arrosion; wear
【经】 attrition
机器的英语翻译:
apparatus; enginery; machin; machine; machinery
【计】 MEC configuration
【化】 engineering; machine
【医】 engine; machine
【经】 machine
翻译例句
1. 这些是第一批能经得住连续碾碎玻璃造成的磨损的机器。
These are the first machines that can stand the wear and tear of continuously crushing glass.
2. 世界上没有永不磨损的机器,无论双螺杆压缩机还是蜗杆压缩机,在若干年后,均需对主机进行维修保养。
The world does not have never worn machine, no matter double screw compressor or worm compressor, in a few years, all needs to carry out the maintenance of the host.
3. 这就是机器零件在使用中磨损的原因。
That is why the machine parts wear away during use.
4. 机构铰接副处过大间隙将引起异常的振动与噪声,加速了疲劳与磨损,严重地影响了机器的动态性能。
Excessive clearance of mechanism joint pair will cause abnormal vibration and noise, accelerate fatigue and wear and seriously affect the dynamic performance of machine.
5. 那就是机器零件在使用过程中磨损的原因。
That is why the machine parts were wearing away during use.
6. 定期维修机器可以大大减少不必要的磨损。
Regular maintenance of machine reduces much needless wear and tear.
7. 该轴承有一层密封涂层,可以阻挡95%的矿业尘埃粒子,以此来延长机器磨损寿命。
The bearings have a layer of seal coating, can stop the 95 per cent of mineral dust particles, which extend the machine wear life.
8. 采用机器视觉测量技术实现对车轮轮缘踏面磨损的在线自动检测,对提高我国铁路车轮轮对的检测水平,具有重要的现实意义。
It is significant to improve the inspection level by using machine vision measurement technology in on-line automatic inspection for train wheel flange and tread wear rates.www.weNtiYI.com
9. 正常磨损的任何机器需要收费,电脑也不例外。
Normal wear and tear on any machine takes a toll, and computers are no exception.
10. 密封处已经磨损,机器漏油了。
The seal has worn and the machine is losing oil.
11. 无法降低的成本,像工资、租金、机器磨损等等。
The expenses that you cannot reduce, like wages, rent, machinery depreciation, rtc.
12. 基于该理论,通过研究磨屑群的特征,就可以推测机器所处的真实磨损状态。
For this reason, the real wear condition will be deduced by studying the group characteristic of debris group in the ferrogram.
13. 慢速旋转将减少搅拌过程中机器的磨损效应。
The slow speed reduces mechanical wear effect in the agitating process.
14. 应及时更换已磨损到位的电刷,及时清除机器灰尘、杂物等。
Replace timely worn or damaged electric brush. Remove timely dusts, small pieces and etc.
15. 磨损颗粒,也叫碎屑,是从相对运动的两个物体表面,特别是当机器进入一种超常的磨损模式时脱落的材料碎屑。
Wear particles or debris can be seen as the product of the removal of material from surfaces in relative motion, especially when a machine enters an abnormal wear mode.
16. 因此研究磨粒磨损的机理,探索造成机器磨损失效的原因,寻求有效而经济的耐磨材料和抗磨技术是一项刻不容缓的任务。
Therefore, it"s an essential task for us to research the principle of abrasive wear, find the reasons of abrasive wear and invent a kind of effectively and economically method.
17. 至于那台机器,它的活动机件已经磨损。
As regards that machine, its moving parts have been worn out.
18. 为提高基于磨粒的机器状态监测的准确性,研究了磨粒特征随滑动磨损进程的变化规律。
The evolutions of wear debris characteristics as wear progress in sliding wear process was studied.
19. 机器设备应接地,电线应可靠绝缘,并装在蛇皮带内,经常检查电机接线是否磨损和漏电。
The machine should be grounded parts the electrical wire should be insulated and installed in the snakeskin annultions. Check out whether the motor is abrasion or creepage.
20. 一般说来,磨损快慢取决于原料的硬度、薪棒的密度、操作人员对机器的操作熟练程度及修复推进器所使用的合金焊条质量。
In general, the speed depends on material hardness of the wear and tear, salaries rod density, the operator of the machine operating proficiency and propeller repair welding alloy used in the quality.
21. 滑油中磨粒的数量、成分和形态反映着机器零部件的磨损形式和磨损程度。
The quantity, composition and morphology of debris in machine oils are a reflection of wear modes and degrees of engine parts.
22. 采用本实用新型的装订机专用导电橡胶垫座,不仅方便了用户装订操作及提高装订工 作效率,而且可避免机器产生运行故障和钻头出现早期磨损。
The utility model is featured with convenient bookbinding operation and high working efficiency, and can avoid operation faults of the machine and early wearing of the drill.
23. 产品的成本取决于原材料,机器的生产磨损费用,人工,管理,销售,仓储和物流等。
The cost of the product depends on raw materials, production costs for machines and labors, management and sales, warehousing and logistics, and overhead.
24. 铁谱技术是近年来应用于监测机器设备运行状态和判断磨损故障的有效方法之一。
Recently, ferrography technique has been one of the effective methods for machine condition monitoring and fault diagnosis, which is based on the analysis of wear particle.
25. 本实用新型在碳刷磨损达到极限时,可以及时提醒用户更换碳刷,避免了机器非正常损坏。
When the wear of the carbon brush reaches to the limit, the wear limit alarm device can timely remind the user of replacing the carbon brush, so the non-normal damage of the machine is avoided.
26. 含有油齿轮箱,使机器运转减少磨损,延长机器使用寿命,提高了机器的利用率。
It contains an oil gear box which reduces abrasion to the machine during the operation, thus prolonging the life span of the machine, enhancing the utilization ratio of the machine.
27. 含有油齿轮箱,使机器运转减少磨损,延长机器使用寿命,提高了机器的利用率。
It contains an oil gear box which reduces abrasion to the machine during the operation, thus prolonging the life span of the machine, enhancing the utilization ratio of the machine.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
