焊接部分用英语怎么说，焊接部分的英文翻译

词语导航

基本信息

词语：焊接部分

繁体：焊接部分

拼音：hàn jiē bù fēn

英语翻译

【化】 welding portion

分词翻译

焊接的英语翻译：

seal; solder; weld
【医】 solder; soldering

部分的英语翻译：

part; section; portion; proportion; sect; segment; share
【计】 division; element
【医】 binary division; fraction; mero-; pars; part; Partes; portio; portiones

翻译例句

1. 目前现有技术造价较高，其网袋焊接部分是间歇式工作，不利于提高生产效率。

Prior art has relatively high construction cost; the mesh bag welding part works intermittently, which cannot facilitate the increase of productivity.

2. 克里斯精心挑选出废弃巴士的一部分车身，然后将它们同废弃的城市巴士上取下的座椅一同焊接好。

To create it Chris carefully chose pieces from the scrapped buses and then welded them together along with seats taken from an old city line.

3. 安装和焊接金属部件或部分在一起，用于制造锅炉，容器，储罐，热交换器，管道和其他重金属产品。

Fit and weld metal parts or sections together to fabricate boilers, vessels, tanks, heat exchangers, piping and other heavy-metal products.

4. 两部分的氩弧焊焊接在一起。

The two parts are TIG welded together.

5. 在经过切割、铜焊、焊接后，金属中没有熔融的部分，但其微观结构和物理特性已被改变。WWw.weNTIYI.CoM

The part of a metal that is not melted during cutting, brazing, or welding, but whose microstructure and physical properties are altered by these processes.

6. 如果你一直小心划出和削减第一页上的这些部分都应该准确地排队准备焊接概述的部分。

If you have been careful when marking out and cutting the parts outlined on page one these parts should all line up accurately ready to weld.

7. 道岔与无缝线路焊接后，随着轨温的变化，长钢轨纵向温度力将直接作用于道岔的撤叉和转撤部分。

When a turnout is connected with CWR through welded joints, the longitudinal rail temperature force ACTS directly on the frog and the switch section along with the variation of rail temperature.

8. 对那些可见部分用于分段合拢的临时填充应整洁地将其去除，损坏的母材应通过焊接和打磨进行修复。

Where exposed to view, the temporary filling used for erection to be neatly removed, damages to the base material to be repaired by welding and grinding.

9. 同时，针对汽车纵梁部分直线段模型进行焊接变形分析，并与试验数据进行了对比，验证了该方法的有效性。

At the same time, analyze the welding deformation of straight-line segment model of side rail, and compare the results with test data, verify this method is efficient.

10. 它可能发生在焊接的任何部分。

It can occur in any part of the weld.

11. 这两个巨大的钢，这是放在精心以上干船坞并排部分，现在是焊接在一起。

These two giant sections of steel, which are placed carefully side by side above the drydock, will now be welded together.

12. 介绍了一台适合于钛合金及其它活性金属惰性气体整体保护焊接设备的结构、各部分的功能、设备的工作原理及使用效果。

This paper introduces the structure of an inert gas -shield equipment for titanium alloy and other active metal welding , functions of its corresponding parts and its working theory.

13. 他们是印度这个雄心勃勃的国家的一部分：普贾里的父亲拥有两家焊接店，深信儿子会出人头地，找到一份坐办公室的工作。

They were a slice of aspirational India: Poojary"s father, who owned two welding shops, was adamant that his son would rise to a higher place in society, an office job.

14. 对GB150的部分焊接接头分类标准与国际标准进行了对比分析，提出了压力容器检验标准的改进建议。

It makes comparative analysis about parts of GB150 welding connection classified standard and international standard. It also makes improvable Suggestions of pressure containers" testing criterion.

15. 如果你是新的焊接，或有点生疏，您可能希望只在一时间解决几个部分。

If you are new to soldering, or a bit rusty, you may want to only tackle a few parts at a time.

16. 这类鞍形管卡的优点是可对管道泄漏点进行永久性修理，把钢板和管子焊接，然后拆走螺栓部分。

An advantage of this type of saddle clamp was that permanent repair could be made by welding the steel piece to the pipe and then removing the bolted portions.

17. 通过设置不同部分壳体单元的不同厚度，巧妙地处理了车体钢骨架与车体侧墙板及其他各种板件的焊接关系。

We set the thickness of the shell elements of the welding parts of the steel structure of the car body and its sheathings, such as side wall sheathing, as the sum of their thickness.

18. 钢衬塑运输槽罐的钢体部分的制作，按照JB/T4735-1997《钢制焊接常压容器》标准。

Transport steel tanks lined with plastic body parts of the steel production, in accordance with the JB/T4735-1997 "welded steel pressure vessel" standard.

19. 整条生产线由放料系统、冲孔系统、成型系统(焊接技术)、切断系统、电控系统等部分组成。

The production line is composed of de-coiler, punching, roll forming (welding), cutting system, electric control system, etc.

20. 基于模糊控制的智能化闪光焊机控制系统是闪光焊机焊接系统的重要组成部分。

The Intellectual Control System of Flash Butt Welding, the main and basic part of the Flash butt welding machine, is the basic to realize the automation of the welding process.

21. 一位提供消息的人说，烧穿点可能发生在火箭的第三和第四部分之间的焊接点上。

A source said the burn-through probably occurred at a seal point between the booster "s third and fourth sections.

22. 译文主要介绍了焊接技术中焊接合部分的特性、常见缺陷及预防措施。

This paper chiefly studies the welded joint characteristics, general weld defects and precautions are principally introduced.

23. 主要适用于焊接不锈钢、铝、铜及部分有色金属。

Mainly used for welding stainless steel, aluminum, copper and some ferrous metals.

24. 大型储罐焊接机是由机械部分、测量传感部分和控制部分组成。

The weld machinery is made of machinery parts, measurement and sensor parts and control parts.

25. 大型储罐焊接机是由机械部分、测量传感部分和控制部分组成。

The weld machinery is made of machinery parts, measurement and sensor parts and control parts.