
词语导航
基本信息
词语:铁铸件
繁体:鐵鑄件
拼音:tiě zhù jiàn
英语翻译
【机】 iron castings
分词翻译
铁的英语翻译:
determine; iron; unalterable; weapon
【医】 Fe; ferri; ferrum; iron; mars; sidero-
【经】 iron
铸件的英语翻译:
cast
【电】 casting
翻译例句
1. 并应用芯线法生产出10吨优质球铁铸件。
And 10 tons qualified castings have been produced.
2. 提出了用气化模铸造型内球化处理生产球铁铸件的方法及其工艺要点。
This paper presents a kind of method for producing ductile iron castings with the technique of evaporative pattern casting and in mould spheroidizing, and introduces its main measures.
3. 轮毂、制动毂等高牌号合金铸铁,球铁铸件毛坯及其他汽车配件毛坯。
High-performance alloy casting iron such as hub break hub. Rough nodular casting and other casting of automobile replacement parts.
4. 目前已初步形成“气发电、电炼铁、铁铸件、钢轧材、渣产建材”良性循环的产业链。
Has taken shape in the current "gas power generation, electric iron, iron castings, rolled steel, slag production materials" virtuous circle of industry chain.
5. 江铃铸造厂是以生产发动机铸件及车用薄壁高强度灰铁和球铁铸件为主的专业铸造厂。
JMC Casting Plant(JCP) specializes in producing automobile engine, gray iron and nodular iron castings, which are thin-walled, and in high strength.
6. 主营灰铁铸造、球铁铸件、搪瓷、高温漆、炉具铸件以及户外家具喷漆、喷塑等铸件。
Main gray iron casting, ductile iron casting, enamel, high-temperature paint, stove castings as well as outdoor furniture, painting, spray casting and so on.
7. 该公司生产的核心,在密集的灰铸铁铸件,球铁,铝,铜合金产品,为欧洲工业市场的各种。
The company produces core-intensive castings in grey iron, ductile iron, aluminium, and copper alloys for a wide variety of products for the European industrial market.
8. 叙述化学成分、孕育工艺、铁液温度及浇注系统等因素对薄壁球铁铸件缩孔和缩松形成的影响。
The influence of chemical composition, inoculation process, temperature of molten iron and pouring system on the formation of shrinkage cavity and porosity was described.
9. 适用范围:锌合金、铝合金、铜合金、非铁金属、不锈钢精密铸件、钢、铁铸件的表面清理、光饰、强化。
Application Range: Applied to surface cleaning, polishing, and intensity of zinc alloy, aluminum alloy, cooper alloy, non-ferrous metal, exact stainless steel casting, steel or iron casting.
10. 经批生产考核,精铸球铁铸件的金相组织可达到球化级别2级,石墨球大小6级,珠光体含量10 %的要求。
Some batches of production showed that microstructure of nodular iron in investment casting can reach to 2 grade nodularization, 6 grade nodule size and 10% pearlite.
11. 公司专业从事铁制螺栓、螺帽等紧固件及铁铸件的热浸锌、达克罗及电镀锌加工,年实现产值在一亿人民币以上。
Professional companies engaged in metal bolts, nuts and other fasteners to the hot-dip zinc and iron castings, and Dacromet Zinc processingachieving more than 100 million yuan in output value.
12. 金属铸工安装和操作各种铸造机,铸造铁和非铁金属产品;手工舀取熔化的金属,并倒入模具,生产铸件。
Metal casters set up and operate various casting machines to cast ferrous and non-ferrous metal products; hand ladle and pour molten metal into moulds to produce castings.
13. 根据铸件大面积铁刺缺陷的技术攻关,论述了造成铸件缺陷的影响因素,制定一套可行的工艺参数,对改进工艺参数有一定参考作用。
The factors which have an effect on the formation of a kind of defect called "iron thorn"on the large area of casting are discussed, and process parameters are presented for the process improvement.
14. 在分型面确定的基础上,完成了凸轮轴铸件相应冷铁的结构优化设计,并详细的介绍了其优化过程。
Based on determining of mold joint, the thesis finished the structure optimization design of chill, and introduced the process of optimization in detail.
15. 在薄壁铸件中获得无游离渗碳体和铁素体基体的稀土球铁的关键是高碳过共晶原铁水。
Therefore, in thin section castings, for eliminating eutectic carbides and obtaining ferritic matrix, melts treated by re need high carbon content and hypereutectic composition.
16. 比较五种冒口工艺方案,采用边暗冒口工艺生产球铁件转动环,提高了铸件质量和经济效益。
By comparison of five kinds of riser, the paper recomends the casting process design of side-blind riser which can assure the casting quality and reduce the casting cost.
17. 介绍均衡凝固的基本原理,叙述铸件结构、冒口位置和冷铁对补缩的影响。
The basic principle of the proportional solidification theory was introduced, and the influences of casting construction, feeder position and chill on feeding effect was described.
18. 应用钇基重稀土镁复合球化剂,铸造厚大断面高韧性球铁冷却壁,成功地获得了铸件中心部位铸态高性能。
The RE(Y)-Mg-Si-Fe nodularizer had been used to cast heavy sectioned high ductile nodular iron cooling wall castings.
19. 阐述了铸件成品率与金属炉料有效率、铁液利用率、工艺出品率、铸件合格率四个比率的关系,指出了铸件成品率与铸造生产的全过程有关。
The relationship between casting yield and effective rate of metal charge, usage ratio of molten iron, technology yield and pass rate of castings were surveyed.
20. 铁液含有过量的氧、氢、氮都能促使铸件产生气孔缺陷。
Molten iron containing excessive oxygen, hydrogen and nitrogen would promote the blowhole to form.
21. 在实验研究了铝锰黄铜中初生富铁相的上浮条件与铁在铸件内的分布规律、偏析量与防止方法。
The conditions of floating off of iron-rich phase for Al-Mn brass, the distribution of iron in castings, the iron segregation and its prevention have been investigated in laboratory.
22. 通过实验研究,用甲苯磺酸作催化剂的呋喃树脂自硬砂与稀土镁作催化剂生产的球铁件,通常在其铸件表层出现异常组织。
The abnormal structure usually appears at the surface layer of nodular iron castings produced by furan-sulfonic acid cured sand mold.
23. 验证了这一装置对于厚大断面球铁 铸件研究的有效性。
The validity of the apparatus to the research on the solidification behavior of ductile iron with heavy section was verified.WWw.wenTIyI.coM
24. 天哲公司提供各种牌号灰铁、球铁、合金铸铁、铸钢和合金钢等铸件。
TINDER can provide alloy casting, gray iron casting, ductile iron casting, and, steel casting etc.
25. 无铸造有害元素,特别适合大型球铁件、风电铸件和铸钢件的稳定生产。
No foundry harmful elements, especially suitable for stable production of big nodular iron castings, wind power castings and steel castings.
26. 无铸造有害元素,特别适合大型球铁件、风电铸件和铸钢件的稳定生产。
No foundry harmful elements, especially suitable for stable production of big nodular iron castings, wind power castings and steel castings.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
