
词语导航
基本信息
词语:弹性聚合物
繁体:彈性聚合物
拼音:dàn xìng jù hé wù
英语翻译
【化】 elastomeric polymer
分词翻译
弹的英语翻译:
ball; bomb; flip; pellet; play; shoot; spring
【医】 bomb; bullet
聚合物的英语翻译:
【化】 polymer
【医】 polymer; polymerid; polymeride
翻译例句
1. 研究了粘弹性聚合物溶液在盲端孔隙模型中的流动与驱替特性。
The flow and displacement characteristics of the viscoelastic polymer solution in the pore model with blind ends are studied.
2. 近年来,出现了两种通过在光弹性聚合物材料中添加非发光染料或发光染料的新的光弹性涂层制作方法。
In recent years, two new photoelastic coatings fabricated by adding either non-luminescent dye or luminescent dye into photoelastic polymer materials have been proposed and well developed.
3. 弹性体是聚合物的一个种类,它的应力-应变曲线表明其变形是完全弹性的,即很低的应力变化就会产生很大的可回复应变。
Elastomer is a class of polymers whose deformation displayed by strain-stress curve is totally elastic i. e. large recoverable strains produced at low stress levels.
4. 就其流变性而言,聚合物溶液和碱—表面活性剂—聚合物(ASP)复合体系均属粘弹性流体,但在中等剪切速率的简单剪切流动条件下,其流变性可用幂律模式描述。
The compound of Alkali Surfactant Polymer (ASP) is a kind of viscoelastic fluid, its rheological behavior can be formulated by power law model in simple shear flow within medium shear rate.
5. 聚合物—形成次防水膜,赋予弹性、伸长率; 形成—无机质弹性复合防水涂膜。
Polymer -- - form times waterproof membrane, giving flexibility, elongation, Form - inorganic compound waterproof coating quality elasticity.
6. 实验研究了大庆工业品HPAM聚合物三元共混体溶液的黏性和弹性。
The solution viscosity and elasticity are investigated for tri-component blends of Daqing"s commercial HPAM polymers.
7. 这一检查可以发现粘多糖或叫GAG,这种聚合物使得关节软骨(关节的衬垫)牢固而又有弹性。粘多糖减少导致骨性关节炎的发生。
The test detects glycosaminoglycan or GAG, the polymer that gives cartilage (the material that cushions our joints) it"s toughness and elasticity. Loss of GAG heralds the onset of osteoarthritis.
8. 此类密封胶包括经硫化可形成真正弹性状态的液体聚合物,它们具有承受重复的接缝变形能力。
Such sealants include the formation of sulfide can be really flexible polymer liquid state, they have to bear the ability to repeat the joint deformation.
9. 提出用形变恢复能力来表征聚合物溶液弹性的大小。
The recovery after deformation was proposed to characterize the elastic property of polymer solution.wWw.WeNTiYI.CoM
10. 聚合物溶液的有效粘度由剪切粘度和弹性粘度组成。
The effective viscosity of polymer solution consists of shear viscosity and elastic viscosity.
11. 阐述了适于弹性纤维熔融纺丝的聚合物聚氨酯和聚醚酯的结构特点;
The structural characteristics of the polymer feedstock, polyurethane and polyether ester, practicable for elastic fiber melt spinning were described.
12. 辐射或化学交联能在聚合物内部产生弹性网络结构,赋予材料高弹态及不熔不溶性。
Radiation or chemical cross-linking in the polymer network structure inside the elastic, giving material melting high-elastic state, and not insoluble.
13. 硬弹性材料是结晶或非结晶聚合物在特定的条件下加工而形成的,这类材料表现出高弹性、高模量和突出的低温弹性。
Hard elastic materials are a class of crystalline or non-crystalline polymers produced under special processing conditions, which show high modulus and high elasticity under very low temperature.
14. 有机硅聚脲基础聚合物,其制备的弹性体,其制备方法及其应用。
Organic silicon polyurea base polymer, elastic body prepared by the same, preparation method and application thereof.
15. 弹性蛋白的表面层几乎是汇合的但在易发生动脉粥样硬化的分叉点却是缺失的,高密度的胶原-蛋白聚合物暴露。
A nearly confluent elastin surface layer was present throughout but was missing at atherosclerosis-susceptible branch points, exposing dense collagen-proteoglycan complexes.
16. DNA是重要的生物大分子聚合物,近年来DNA和其它一些生物聚合物的结构和弹性性质已经成为研究的热门课题之一。
DNA is an important biopolymer. In recent years, the configurations and elastic property of DNA and other biopolymers have been one of the pop researching topics.
17. 分析了具有不同黏弹性质的聚合物溶液在油藏多孔介质中的流动规律。
The flow laws of the polymer solutions of different viscoelastic properties in porous reservoir media are obtained.
18. 在聚合物驱油过程中,聚合物溶液的粘度和粘弹性对提高驱油效率起到了至关重要的作用。
In the process of displacement of oil by polymer solution, the viscosity and viscoelasticity of polymer solution are vital to displacement efficiency.
19. 聚合物溶液的粘弹性越大,其在地层孔隙中的渗流阻力越大,弹性效应在增高注入压力中所占的份额也越大。
The larger viscoelasticity of polymer solution, the higher percolation resistance, and the greater of proportion of high injection pressure arising from elastic effect.
20. 证明了简化非线性粘弹性本构关系对聚合物一类材料的适用性;
The practicability of simplified nonlinear viscoelastic constitutive relations for a class of materials as polymers is verified.
21. 聚合物基复合材料的动态粘弹性能在现代科学技术领域应用日益广泛。
The polymeric matrix composites are applied to the modern scientific and technical field.
22. 热塑性弹性体(TPE)是一种极具发展潜力的聚合物材料。
Thermoplastic Elastomer (TPE) is a kind of polymer material which has great potential for development.
23. 新型承压堵漏剂在传统桥接堵漏单纯架桥、填充的基础上,引入具有较强吸水弹塑变形功能的聚合物弹性颗粒sd - 1。
Polymer elastic granule SD-1, has great hydroscopicity, was introduced to fill and squeeze and to enhance plug intensity on the traditional techniques.
24. 它的高度剪切敏感性流动行为意味着它仍然很容易分散,即使在更不相容的聚合物中,如热塑性弹性体。
Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers.
25. 它的高度剪切敏感性流动行为意味着它仍然很容易分散,即使在更不相容的聚合物中,如热塑性弹性体。
Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
