
词语导航
基本信息
词语:水力轮机
繁体:水力輪機
拼音:shuǐ lì lún jī
英语翻译
【机】 water turbinewwW.WENtiYI.CoM
分词翻译
水力的英语翻译:
hydraulic power; waterpower
【电】 hydraulic power; water power
轮机的英语翻译:
【机】 de laval turbine de laval; turbine; turbo-
翻译例句
1. 这额外的补充来自于添加的大约100台小型天然气轮机和更多的水力发电,同时,许多公司的电能由自己供给。
The extra capacity comes from an additional 100 or so small natural-gas turbines; firms generating their own power; and more hydroelectricity.
2. 其生产产品包括风力涡轮机,水力电力,核能,太阳能发电等所有的战略资源,以减少对化石燃料的依赖。
This includes wind turbines, hydro-electric power, nuclear energy, and solar power-all of the strategic sources to reduce dependence on fossil fuel.
3. BPA随后解释道,并不是说非要进行水力发电不可。因为只有额定的水量能流经涡轮机组,注入水坝中。
Not making electricity is not an option on the river, the BPA argues, because only a limited amount of water can be kept out of turbines and spilled over federal dams.
4. 文章就龙滩水轮机转轮的水力设计、模型试验、转轮结构设计、转轮工地制造及转轮的最终验收,进行评述并提出一些建议。
The thesis comments on the hydraulic design, the model test, the runner structure design, the runner field fabrication and the acceptance check. Some proposals are put forward also.
5. 根据电站参数设计出性能优良的模型转轮是水轮机水力设计的关键。
Designing the satisfactory model runner according to the parameters of the power station is the key in hydraulic design.
6. 许多研究成果表明,影响水轮机水力稳定性有多种因素,其中一个重要因素是尾水管内水流的压力脉动。
Many study results showed that pressure fluctuation in draft tubes is one of the most important factors that affects the stability of turbines.
7. 此外,该设计方法也可用于轴流式水轮机转轮的水力设计。
Besides, it can be used for the hydraulic design of axial flow turbine runner.
8. 本文作者探索了水轮机选型设计过程中的数据处理及数据库的建立方法,并建立了水轮机过流部件水力设计库。
In this paper, research on data process and database creating method is conducted during the design of hydraulic turbine and the hydraulic design database for flow parts is built.
9. 变速恒频水轮发电机系统是一个涉及水力、水轮机和发电机的综合系统。
Hydrogenerator system with DFG is a synthetical system including water, hydroturbine and generator portion.
10. 概要介绍混流式水轮机转轮计算机设计的水力设计方法,其一般原理同样适用于离心泵和混流泵叶轮的设计。
A brief presentation on computer aided hydraulic design of Francis Turbine runners is given, the general principle of which are also applicable to centrifugal and mixed flow pump runners.
11. 在数学模型中计入水轮机,发电机,负荷特性,调速器参数以及水力系统的特性。
The characteristics of turbine, generator and load, governor parameters and hydraulic characteristics sre considered in mathematic model.
12. 一些潮汐能设施的运作就像传统的水力发电计划一样——潮水直接在涡轮机中流过。法国兰斯的一个有42年历史的堰坝,就属于这一类。
A few tidal projects, such as the 42-year-old barrage at rance in France, operate like traditional hydro schemes, in which tidal water simply rushes through turbines.
13. 以具有上下游调压井的典型复杂水力系统为对象,建立了用于电力系统暂态稳定分析的水轮机和输水系统不同形式的数学模型。
Based on typical complex hydraulic system with upper and lower surge tanks, different models of hydro-turbine and conduit system used in power system transient stability analysis are presented.
14. 本文建立了水轮机引水部件多目标水力优化的数学模型,并进行了计算机数字仿真。
The mathematical model is established for the multi-objective hydraulic optimizations of the diversion components of hydraulic turbines, and the computer simulation is carried out.
15. 蜗壳、固定导叶和活动导叶组成的引水、导水部件的水力设计对水轮机性能有着举足轻重的作用。
The hydraulic design of diversion components and guiding device which are composed by volute, stay vanes and guide vanes is very important to the performance of hydraulic turbine.
16. 混流式水轮机转轮前后的流场研究对于转轮水力设计,改善其性能有着重要意义。
The study on flow field in front and at back of a Francis turbine runner is very important for the runner in its hydraulic design and characteristic improvement.
17. 计算结果表明,多目标水力优化设计可以改善水轮机引水部件的综合水力性能。
The computational results has shown that the global hydraulic performances of the diversion components of hydraulic turbines can be modified by means of the multi-objective hydraulic optimizations.
18. 但由于机组转动惯量小,稳定性差,相应水轮机水力振动对其影响也较大。
But because of small rotating inertia of units and lack of stability, thus hydraulic vibration induces huge effect.
19. 水轮机采用设置在转轮外缘出口处的可调筒阀进行过流量的调节后,各项水力性能均将有所改善。
An adjustable cylindrical valve is used for overflow regulation at outlet of water-wheel outer periphery to improve various hydraulic performances.
20. 采用高速摄影、连续拍照等技术手段,对大型水轮机叶片底侧式浇注系统的充型过程进行了水力模拟研究。
In this paper, water has been used to simulate the bottom-sides gating system of the large hydro-turbine blades by means of high-speed and continuous photographic techniques.
21. 混流式水轮机的水力稳定性与机组运行工况密切相关。
The hydraulic stability of Francis turbines is closely related to the operating conditions.
22. 水轮机中的减压管对于水力发电机组稳定性的影响,已经引起了研究人员和运行人员的普遍关注。
The vibration of the hydropower unit caused by the relief pipes of the turbine has attracted scholars and station staffs attention.
23. 本文采用黏性三维湍流流动分析法,通过Fluent软件分析了重力场对灯泡贯流式水轮机流场分析和水力性能预估的影响。
The software FLUENT for 3d viscous turbulent flow is used to analyze the influence of gravity on flow field analysis and hydraulic performance evaluation of bulb turbine.
24. 本文采用黏性三维湍流流动分析法,通过Fluent软件分析了重力场对灯泡贯流式水轮机流场分析和水力性能预估的影响。
The software FLUENT for 3d viscous turbulent flow is used to analyze the influence of gravity on flow field analysis and hydraulic performance evaluation of bulb turbine.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
