通用计用英语怎么说,通用计的英文翻译


词语导航

基本信息

词语:通用计

繁体:通用計

拼音:tōng yòng jì

英语翻译

【电】 universal meter

分词翻译

通的英语翻译:

all; authority; connect; general; go to; notify; open; through; understand
whole
【医】 make; per-

用计的英语翻译:

maneuver

翻译例句

1. 提示、设计过滤和通用计算。

Prompts, Design Filters, and Common calculations.WWW.wENtiyI.Com

2. 但现在,通用计划再次向公众出售股票。

But now GM plans to sell stock to the public again.

3. 这是一个与地球上的通用计划直接干预的方式。

This was a way to directly interfere with the Universal plans for Earth.

4. 虚拟仪器描述了可编程仪器和通用计算机的结合。

Virtual instrument describes the combination of programmable instruments with general-purpose PCs.

5. 根据轨迹的求解过程,运用VB编制通用计算程序。

A general calculation program has been developed with VB, according to the solution procedure.

6. 最后给出了具体的蕴含算子来验证提出的通用计算公式。

At last, a concrete implication was used to test the general calculation formula.

7. 一台通用计算机,它通过串口或网络连接与目标机通讯。

A general - purpose computer that communicates with the target via a serial port or network connection.

8. 应用微积分方法推导出指标因素影响分析的通用计算公式。

A general formula is derived for analyzing the effect factor of indices by using calculus method.

9. 建立了计算旋风分离器压降及速度分布指数的通用计算式。

A semitheoretical modeling to calculate pressure drop and exponent of vortex velocity profile is deduced.

10. 本文提出了一种新的液体火箭发动机功率平衡通用计算方法。

A general method for the cycle power balance calculation of the liquid rocket engine is proposed in this paper.

11. 介绍一种以大规模集成电路为核心组成的通用计数器的设计。

The design of an universal electronic counter which mainly consists of LSICis introduced.

12. PCI是DSP应用系统与通用计算机高速通信的理想接口。

PCI is an ideal interface for high-speed communication between DSP application system and general computer.

13. 提出了该逆变器的通用计算机辅助分析与设计框图和源程序。

Computer aided analysis and design flow chart and program for current source inverter circuit are presented.

14. 由于微处理器是通用计算机的核心部件,故仍称为计算机数控。

As microprocessor core is a general computer components, it is still known as the CNC.

15. 简要的叙述了光学薄膜光学特性的通用计算方法,即特征矩阵法。

A general calculating method of optical character of optical thin films, namely characteristic matrix method is stated concisely.

16. 该计时器既扩展了通用计数器的功能,又提高了计时器的准确度。

The developed timer extends the functions of general counter and improves the accuracy of timer.

17. 嵌入式系统开发与通用计算机系统开发相比,具有明显不同的特点。

The development of embedded system is obviously different with the one of general computer system.

18. 有限元法实质上是变分问题的一种数值解法,是物理问题的通用计算方法。

Essentially, the finite element method is a numerical technique for the variational problems, which is a general approach to physical problems.

19. 本文是为了用微机控制现有型钢矫正机最佳压下规程而设计的通用计算程序。

A general calculating program designed for optimum reduction rules for existing bar section leveller with minicomputer is introduced in the article.

20. 通用计算器的掌上电脑是一个计算器,它可以让您的计算基本和复杂的算术运算。

IFD calc for Pocket PC is a calculator, that allows you to calculate basic and complicated arithmetic expressions.

21. 本文提出了高速与超速离心机所用各类不同型号转子的离心半径的通用计算公式。

A common formula for various types of rotors of different centrifugal radii on high speed centrifuges and ultracentrifuges were suggested.

22. 目前在化学文献中还没有一个能够包括各种混合酸碱的复杂体系的通用计算公式。

Up to the present, no general formula, covering all kinds of multiple equilibrium systems of mixed acids and bases has appeared in chemical literature.

23. 它可以彻底消除由噪声引起的寄生脉冲,现已成功地应用于通用计数器的设计中。

It can quit clearly the autoeciousness impulses brought by the noise and it has been used in the design of general counter.

24. 介绍了汽轮机组热力性能试验通用分析软件的组成,给出了汽轮机加热器的通用计算模型。

The composition on general Analysis Software of steam turbine Thermal Performance Tests is introduced, and general calculation model of heater for steam turbine is given.

25. 但对定位误差通用计算模型的研究涉及甚少,而对角向尺寸定位误差通用建模的研究则更少。

However, little has been done on the generalized mathematical modeling of locating errors, especially for angular dimensions.

26. 虚拟仪器技术指在包含数据采集设备的通用计算机平台上,根据需求高效率地构建起的测量系统。

Virtual instrument technology allows the efficient construction of measurement system on universal computer platform containing data acquisition device according to specific requirement.

27. 本文以通用计算机系统软件为基础,对专用阵列计算机ABC95的系统软件进行了探讨与实践。

Based on the general computer system software, the research and practice on ABC95 Array computer system software are explored in this paper.

28. 通用计划2010年将伏特车推向市场,或者,在大众买得起的锂离子电池研发成功后,立即上市。

M. plans to put the Volt on the market in 2010, or as soon as an affordable lithium-ion battery can be developed.

29. 结合现有的转子结构动力特性计算方法,开发出分析航空发动机转子系统动力特性的通用计算程序。

According to the calculating methods of current rotor structure dynamic characteristics, a general calculating program of analyzing aero-engine rotor system is developed.

30. 这些合同将使美国海军获得舰载网络基础设施服务,以及生产、工程和通用计算环境等领域的相关支持服务。

The contracts will let the Navy obtain shipboard network infrastructure services and related support services in the areas of production, engineering and common computing environments.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!