砂孔用英语怎么说,砂孔的英文翻译


词语导航

基本信息

词语:砂孔

繁体:砂孔

拼音:shā kǒng

英语翻译

【机】 sand hole

分词翻译

砂的英语翻译:

【机】 sand

孔的英语翻译:

aperture; bore; foramen; hole; os; ostium; vulva
【化】 hole; opening
【医】 apertura; aperturae; aperture; bore; coel-; foramen; foramina; hiatus
mesh; opening; pore; Pori; porosity; porus; trema

翻译例句

1. 结果表明,射砂孔位置的气流和砂流速度有显著差别。

It has been shown that the velocity of sand flow and airflow at the entry of core-box was quite different.

2. 前言: 湿砂型铸铁件产生砂孔和渣孔缺陷的主要原因是:(1)芯头或砂台的间隙偏小;

The reasons causing sand inclusion and slag inclusion are: ( 1 ) gaps between mould and core prints or cods too small;

3. 辅以少量增孔助剂,对砂孔进行固结试验。 在固化剂和扩孔剂用量范围内,利用正交试验优化固砂剂组成。

Within the dose range of curing agent and enlargement agent , the composition of sand consolidation agent is optimized by using quadrature test .

4. 精密注塑、压铸、模具的修补金属饰品及配件、精密冲压件的焊接、失蜡铸件、铝铸件、不锈钢产品砂孔修补。

Precision injection molding, casting, mold repair metal jewelry and accessories, precision stampings, welding, lost wax castings, aluminum castings, stainless steel sand hole repair.

5. 所有我需要做的就是这个核心刮砂的,将有一个很好的通过铸造直孔。

All I need to do is scrape this core sand out and there will be a nice straight bore through the casting.

6. 它采用高孔密大孔径深穿透射孔弹和大压差抽吸炮眼清洗技术,不仅能提高油井产能,解除近井带污染,还可以改善防砂完井效果。

The technology uses deep penetration perforation charge with high perforation density and large perforation diameter and surging perforation with greater pressure differential.

7. 本工程防渗墙在富含水砂卵砾石地层施工中,由于各种因素引起严重塌孔,施工中采用了深井井上降水措施。

The impervious wall of this project is located in water bearing sand and gravel, the collapse hole takes place due to some factor affect, the deep well lower water level measures are adopted.

8. 对射孔器和射孔器适用性,地层出砂机理以及目前现场使用的各种防砂方式进行分析,提出了利用高孔密射孔进行防砂的思路。

Based on the analysis of the perforation applicability, sand production mechanism of formations, and sand control methods in production, a new method of sand control using high shot density was given.

9. 砂固结预应力锚杆的锚固力是由砂体与锚孔壁之间的摩擦力提供的。

The anchorage force of consolidated anchorage with prestressed bolt is actually the friction resistance between sand and the wall of drill hole.

10. 本文阐述了利用自制的砂带磨削装置,对液压机主缸内孔行进磨削加工。该方法为深盲孔的磨削加工提供了经济可靠的工艺方法。

The main cylinder of hydraulic press is ground by self-made belt grinding device. The method supplys grinding of deep blind hole a economic and reliable technology.

11. 配制了专用芯砂,成功地解决了异型盲孔的清砂问题。

He has prepared a special core sand and solved the problem of cleaning blind holes successfully.

12. 研究区葡萄花油层段储层主要为中孔低渗储层,砂体连通性差,非均质性强。

Putaohua oil bearing reservoir primarily is middle prosperous and low permeable with sand bodies of bad conjunction and high heterogeneity.

13. 泥浆的主要功用之一是通过自身的循环,有效地清除钻孔内破碎下来的岩屑,特别是对于水平孔,可以避免砂床的形成,减少钻孔内的事故。

Drilling mud can clean out the cuttings by its circulation, especially for horizontal hole, it can avoid the sand-bed formation and reduce downhole troubles.

14. 砂体沉积时,沉积环境(水动力条件)控制了砂岩中孔喉等效半径分布规律。

While the sand bodies were depositing, the pore texture and the distribution of pore radius in the sandstone were controlled by the sedimentary environments (the dynamic condition of water agents).

15. 本工艺标准适用于工业和民用建筑中粘土、粉质粘土及含少量砂、石粘土层,且地下水位低的人工成孔灌注桩工程。

This technology is applicable to industrial and civil construction clay, silty clay and containing a small amount of sand, stone clay, and low groundwater levels Artificial hole pile works.

16. 在砂土层中钻进时,要及时开启泥浆分离器,降低含砂率,保证钻进速度和孔壁的稳定。wWw.WENtIyI.Com

When drill hole in sandy soil the desander should be timely turned on to reduce the sand content and ensure the drilling progressing and stability of the hole.

17. 由于缺少有效的将砂带导引入内孔机构,使目前砂带磨削无法普遍应用于内回转表面的加工。

Because there was no effective belt leading mechanism, the belt grinding usually could not be used for internal processing, especially small diameter internal processing.

18. 由于缺少有效的将砂带导引入内孔机构,使目前砂带磨削无法普遍应用于内回转表面的加工。

Because there was no effective belt leading mechanism, the belt grinding usually could not be used for internal processing, especially small diameter internal processing.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!