位移补偿用英语怎么说,位移补偿的英文翻译


词语导航

基本信息

词语:位移补偿

繁体:位移補償

拼音:wèi yí bǔ cháng

英语翻译

【计】 bit shift compensation

分词翻译

位移的英语翻译:

displacement
【计】 bit shift

补偿的英语翻译:

compensate; redeem; retrieve; equalize; expiate; repair; compensation
expiation; reparation
【计】 compensating; REC
【医】 anastate; compensation
【经】 bote; compensating; compensation; counter-performance; indemnification
indemnity; made good; offset; recompense; recoup; recoupment; remedy
reparation

翻译例句

1. 对压缩、拉伸、扭转变形能较好地起到位移补偿作用;

The compression, tensile, reversing the deformation can better play a role in displacement compensation;

2. 从结构、工作原理和安装定位方面,介绍了一种具有轴向位移补偿和径向支撑功能的动密封装置。

A type of dynamic seal device with functions of axial displacement compensation and radial support, is introduced from respects of structure, working principle and installment localization.

3. 台面设有X、Y、Z方向移动、双刮刀双向印刷、双向抬版、双向位移补偿,能确保线路转角夹缝无漏印、贯孔饱满等完美印刷效果。

The table with X, Y, Z axes to move, double squeegees with two directions printing, two directions put on the stencil and sure the circuit board can be printing by the through-hold.

4. 本文介绍了一种新型强度补偿型二维光纤位移传感器。

This paper describes a two dimensional fiber optic displacement sensor with intensity compensation.

5. 本文介绍了一种强度补偿型光纤位移传感器。

An optic fiber displacement sensor with intensity compensation is introduced in this paper.

6. 为了补偿轴向位移,经常在双十字万向联轴器的中间轴上采用轴向滑动装置。

In order to compensate axial displacement, an axial sliding mechanism is often used in the intermediate shaft of a double universal joint.

7. 位移相位中心法在合成孔径声呐载体运动误差较小时是一种运动补偿的有效方法。

Displaced phase center algorithm is an effective motion compensation method when the motion error along the synthetic aperture is small.

8. 主要用在蒸汽管道上面,补偿蒸汽管道因热胀冷缩产生的位移。

Mainly used in steam pipe above, the compensation steam pipe for heat bilges cold shrink from the displacement.

9. 其结构采用了国外先进的多层结构,位移刚度小,补偿能力增强。

We adopted overseas advanced multilayer structure, with little displacement and stronger compensating capability.

10. 介绍一种适用于大行程位移检测,并具有误差补偿功能的智能型检测系统。

This paper presents an intelligence measurement system of long displacement with error compensation ability.

11. 理论分析和实验结果表明,强度型光纤位移传感系统采用补偿技术之后,其测量精度和稳定性有了明显提高。

Theoretic analysis and experimental result indicate that, the optic fiber displacement sensing system which adopts the compensatory technology obviously increases its measuring accuracy and stability.

12. 该方法经改进后,可应用于深海采矿升沉补偿系统中,为采矿船提供实时、准确的升沉位移数值。

After being improved, this system can be uesd in the heave compensation system for deep sea mining system, and provides real time and exact heave distance for the mining ship.

13. 本文着重对电涡流位移传感器的温度补偿系统及其补偿手段进行分析研究。

In this paper, we emphasize on the temperature compensation system and its means of Electric Eddy Transducer.

14. 提出一种具有绝对零位标识的光栅位移测量系统的误差补偿方法。

A method for compensating the measuring error of the grating displacement measurement system with absolute zero mark is presented.

15. 补偿器通过受力构件来承受压力推力,只需固定中间支架,产品只能吸收轴向位移。

The compensator bears the pressure or thrust as long as fixed the mid supporting frame and it can only absorb axial displacement.

16. 沿断裂带滑动速率具明显的非均匀性特点,表现为自东向西水平位移具累积滑动亏损特征,垂直位移则具补偿性。

The horizontal displacement has cumulative slip deficit from east to west, while the vertical displacement has the nature of compensation.

17. 实时比较工件径向位移信号是否超出预设范围,同时参考刀具磨损方程的定量估计结果,决定是否送机床刀具补偿信号。

Comparing radius change of workpiece with limitation real time , at the same time taking into account the result of tool wear model to decide whether send offset signal to machine tool or not.

18. 在深入分析位移相位中心算法的基础上,提出了一种改进的多接收元合成孔径声纳运动补偿算法。

Based on the deep study of displaced phase center algorithm, an improved movement error estimation algorithm for multi-hydrophone SAS was proposed.wWW.wenTiYI.cOm

19. 这种可补偿型光纤位移传感器的输出与传感器光源的特性、环境介质以及被测目标表面的性质无关。

The outputs of this kind of optical fiber reflective sensor are independent of the characteristics of the light source, of the losses in the ambient medium and the target reflectivity.

20. 在分析位移相位中心运动补偿法的基础上,提出了一种改进算法。

Based on analyzing the so-called displaced phase center algorithm, an improved algorithm is proposed.

21. 实验结果表明,该方法不但可以有效补偿尖峰误差,而且可以大幅提高位移测量系统的测量精度。

Experimental results show that the method may not only effectively compensate the spike error but also greatly improve the precision of the measuring system.

22. 同时得出了金属波纹管本身具有较大的横向补偿位移的能力,可适应较大的变形和沉降要求。

At the same time, that the metal corrugated pipe has outstanding capacity of axial supplement displacement is educed, which can meet the demands of rather larger deformation and settlement.

23. 提出一种加入补偿因压力损失导致顶锤位移产生的误差,并结合单神经元pid的控制方法。

A control method of compensation for the top hammer displacement error caused by pressure loss and combining the single neuron PID is proposed in this paper.

24. 还研究了对船舶摇摆引起的线位移作补偿的平台数学模型,研究了船舶有线运动时的平台的数学模型。

This article also builds up platform mathematical model of compensating linear displacement caused by ship"s shaking and platform mathematic model of the ship"s linear moving.

25. 根据对用于镗孔加工刀具补偿的微位移技术的分析以及对柔性铰链机构的研究,研发了一套具有自主知识产权的平行四边形弹性镗杆结构的镗孔刀具微量补偿装置。

Based on the research on micro movement and elastic gemels, a boring cutter micro compensation device amounted on the parallelogram elastic boring rod is developed with self owned intelligence right.

26. 通过位移预补偿方式减小了时域微分估计中的不准确性,极大地提高了光流计算精度。

However, the error of the optical flow estimation derived from the error of temporal differential estimation is not taken into account in above methods.

27. 本文介绍了WX—042磨床的单片机控制系统,它由8031单片机、步进电机伺服装置及光栅位移检测装置等组成。具有砂轮磨损自动补偿功能。

The control system of WX-042 grinder consisted of 8031 single chip computer, stepping motor servo device and grating displacement tester, can automatically compensate the wear of the wheel.

28. 文章提出了四种抑制或补偿超磁致伸缩驱动器热位移的方法。

This paper puts forward 4 methods for restraining and compensating the thermal-deformation of the giant magnetostrictive actuator.

29. 波纹膨胀节是用于补偿管道的热膨胀及各种位移的新型补偿元件。

The expansion joint is a new type of device used for compensating the thermal expansion or other movements of piping systems.

30. 本文提出了三个有源补偿rc二阶带通滤波器,给出了这类电路主极点位移的一般公式。

Three active RC second-order bandpass filters with active compensation are introduced. A general formula for analysing the shift in dominant poles is also presented.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!