轮齿用英语怎么说,轮齿的英文翻译


词语导航

基本信息

词语:轮齿

繁体:輪齒

拼音:lún chǐ

英语翻译

【机】 gear tooth

相关词条

1.cog  

分词翻译

轮的英语翻译:

annulus; ring; take turns; wheel
【医】 wheel

齿的英语翻译:

tooth; tine
【医】 dens; dent-; dentes; denti-; dento-; odont-; odonto-

翻译例句

1. 齿轮齿条套车部件,保证荷载同轴。

Rack and pinion telescoping section ensures proper load alignment.

2. 介绍一种精确求解齿轮齿形误差的新算法。

A new precise algorithm for the profile deviation of gears is introduced.

3. 根据齿轮啮合原理,建立了轮齿的精确齿形。

Based on gear engagement theory, the exact model of gear teeth is produced.

4. 提出了任意转角位置的渐开线齿轮齿廓的参数方程。

The parameter equation of involute tooth profile on any angular position is presented.

5. 焊接钢型滚轧链条。焊接钢牵引链。附件和链轮齿。

Welded steel type mill chains, welded steel drag chains, attachments and sprocket teeth.

6. 大多数是轮齿间有灰尘、异物,使轮系齿间相互卡住。

Most are between those dust and foreign bodies, the train stuck between teeth.

7. 分析了齿轮副各几何参数及误差对轮齿振动产生的影响。

Analyzed the effects on teeth vibration exerted by geometry parameters and errors of gears.

8. 为了平顺地传递运动,齿轮齿的接触面必须精加工成特殊齿廓。

To transmit motion smoothly, the contacting surfaces of gear teeth must be carefully shaped to a specific profile.

9. 大模数齿轮齿条的承载能力是关系海洋平台可靠性的重中之重。

The strength of large module gear-rack is very important for the reliability of the ocean platform.

10. 我们现在还不是中国这个大齿轮上不足挂齿轮齿,至少现在不是。

And yet we are not cogs in a Chinese wheel, at least not yet.

11. 订购时,请指定链轮齿和‘链条编号或美国尼伯科阀门型号和通径。

When ordering specify either the sprocket and chain number or the NIBCO valve figure number and size.

12. 对齿轮齿面接触应力计算中曲率系数的计算依据作了进一步的研究。

Further study of the calculation basis of curvature coefficient for calculating the surface durability stress are made.

13. 这种新方法特别适用于大齿轮齿形误差在位检测仪器的研制和开发。

This new method is especially suitable for developing on-line measuring instruments for large gear"s profile.

14. 考虑系统误差和轮齿综合柔度,对齿轮弯曲强度的计算力点进行研究。WwW.WEnTiYi.Com

Considering the system errors of gear drive and teeth synthetic flexibility, the loading point of bending strength was studied.

15. 对于多级齿轮传动系统的齿轮齿数分配问题,需要具体情况具体分析。

About the teeth number distribution of multistage gear transmission system, concrete analysis should be made according to concrete circumstance.

16. 结果表明。本文提出的预测单个轮齿起振力的方法是一种较有效的方法。

The result shows that the method of predicting exciting force at tooth put forward is effective.

17. 结合机床调整参数、齿轮啮合原理,建立了螺旋锥齿轮齿面误差修正模型。

The error correction model of tooth surface was established by machine tool adjustment parameters and meshing principle.

18. 根据渐开线齿轮的原理和渐开线的基本性质,介绍渐开线齿轮齿廓的形成。

On the base of principle of involute gear and its property, the formation of tooth surface are introduced.

19. 通过对有内螺纹的塑件结构分析,确定采用齿轮齿条机构脱模的模具结构。

Through analyzing the structure of plastics with inner screw, determined mold structure with gear and rack stripping screw mechanism.

20. 下面的讨论中假定轮齿加工没有误差,轮齿表面完全光滑,轮齿为绝对刚体。

The following discussion assumes the teeth to be perfectly formed, perfectly smooth, and absolutely rigid.

21. 脉冲的SL 85车轮印有大会提供比传统的齿轮齿车轮更高的脉冲计数磁极。

The SL85 pulse wheel assembly is imprinted with magnetic poles that provide higher pulse counts than traditional gear tooth wheels.

22. 整个齿轮齿条式转向器装载金属壳内,其齿条从转向器伸出来与转向摇臂连接。

A rack-and-pinion gear set is enclosed in a metal tube, with each end of the rack protruding from the tube.

23. 通过分析锥齿轮的加工方法和齿轮啮合理论,建立了螺旋锥齿轮齿面数学模型。

A mathematical model of spiral bevel gear tooth surface was built by analyzing manufacture method and meshing theory.

24. 最核心的部分是一个“太阳能追踪器”,由废旧的自行车链轮齿、弹簧和石头组成的。

At its heart is a "solar tracker" made of old bicycle sprockets, springs and rocks.

25. 对齿轮齿面损坏造成的齿轮失效进行了分析,并提出了一些提高齿轮接触强度的方法。

This paper analyzes gear failure resulted by damage of teeth surface and puts forward some methods improving touch strength of gear.

26. 利用I-DEAS软件本身的参数化设计功能,编写了摆线轮齿面接触有限元建模程序;

Modeling program of cycloid profile contact finite element was finished by use of parametric function in I-DEAS software.

27. 齿轮和齿轮托可以是铸铁或铸钢,可以有铸造或机加工的齿轮齿,取决于负载和应用环境。

The gears and gear brackets may be either cast iron or cast steel and may have cast or cut teeth, depending on the loads and the application.

28. 齿轮和齿轮托可以是铸铁或铸钢,可以有铸造或机加工的齿轮齿,取决于负载和应用环境。

The gears and gear brackets may be either cast iron or cast steel and may have cast or cut teeth, depending on the loads and the application.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!