
词语导航
基本信息
词语:局部冷却
繁体:局部冷卻
拼音:jú bù lěng què
英语翻译
【化】 sub-cooling
分词翻译
局部的英语翻译:
part
【计】 L; LOC
【医】 mero-; topo-
冷却的英语翻译:
cool; cooling; refrigeration
【计】 chilling; cooling
【化】 cooling
【医】 cooling; refrigeration
翻译例句
1. 运用AN SYS软件对圆柱体坯料局部加热和局部冷却过程进行了热分析。
The process of local heating and local cooling on cylinder billet is analyzed by the ANSYS software.
2. 为解除故障,对火焰筒进行了局部冷却结构的改进设计。文中并给出了测试数据。
To cope with such problems, the author recommends an improved design for the combustor local cooling with measuring and test data being given in the paper.
3. 经过适当的输入变换和动态解耦,结合轧辊的热传输特性,最后获得了简单、实用的轧辊局部冷却控制模型。
By proper transforming of the system input and dynamic decoupling, a simple and useful model for partial cooling control has been obtained on the basis of the thermal transfer characteristic of rolls.
4. 无论从简单的局部冷却到复杂的,长期冷却方案,还是从24小时的紧急服务到便携式的配电支持,TEMP- AIR均可提供全套的冷却设备。
From simple spot-cooling to sophisticated, long-term solutions, TEMP-AIR offers complete assistance - from 24 hour emergency service to portable power and distribution support.
5. 对陨石球粒质地的研究证实,它们的冷却速度相当快,短则几分钟,长则数小时,因此形成陨石球粒的高温活动肯定是局部的。
Study of the textures of chondrules confirms that they cooled rather quickly, in times measured in minutes or hours, so the heating events that formed them must have been localized.
6. 焊接过程对被焊工件来说,是局部的不均匀加热过程和不均匀冷却过程。
The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.
7. 在薄板焊接中,由于局部加热和迅速冷却产生了沿焊缝方向的焊接收缩应力,而导致焊接薄板发生屈曲变形。
Localized heating from the welding process and subsequent rapid cooling induces welding shrinkage stresses along weld bead during welding thin-wall plate and causes structural buckling distortions.
8. 热图像真实地反映出每一股射流的冲击冷却局部换热特征。
The thermal images show truly the features of local heat transfer for each jet impingement cooling.
9. 对叶片弦中区内部有、无冲击射流的气膜出流冷却方式中,冷气侧气膜孔局部换热特性进行了实验研究。
Experimental investigation of the turbine blade local heat transfer characteristics at the inner side of the mid-chord region near film holes was conducted, with and without impingement cooling.wwW.wENTIyi.cOm
10. 结果表明,采用局部加热冷却的方法可以有效地减小叶片危险区域的残余拉应力峰值。
The result shows that the method of local heating-cooling can decrease the residual tensile stress peak in dangerous area of the blade.
11. E6608气体冷却器失效形式属于典型的不锈钢局部腐蚀,既有冲刷腐蚀、晶间腐蚀、又有高温酸性环境下的过氧化腐蚀。
The corrosion type of E6608 gas cooler included eroding corrosion, intercrystalline corrosion and overoxidation corrosion in acidic high temperature environment.
12. 在金属结构上局部加热,使结构的某些部位被塑性压缩,冷却以后由残留的局部收缩而获得矫正。
Local heating on the structure of metal produces the plastic contract of some places of the structure. After cooling, the remained contract can repair the beams bend.
13. 这种失效的原因在这些局部可能是由于机械和热应力的双重作用超过了辊子自身的材质的抗屈服强度所导致的,并且在进一步冷却中还会进一步扩展。
These cracks occur when the combination of mechanical and thermal stresses within these local areas pass over the yield strength of the barrel material and are exaggerated during subsequent cooling.
14. 型产品提供开放式工作区域的手工冷却和过程冷却以及选择性的局部减温。
Type m units provide man cooling and process cooling for both open work areas and selective spot cooling.
15. 结果是可以得到一种构件,其在快速冷却的区域中具有局部的高强度,而在较缓慢冷却的区域中具有局部改变的冶金性能以改进机械加工性。
The result is a component with local high strength in the rapidly cooled zones and locally altered metallurgical properties to improve machinability in the more slowly cooled zones.
16. 当横流雷诺数与射流雷诺数之比大于0.5之后,有横流时的冲击射流冷却局部努赛尔数比无横流时有较为显著下降。
When the cross-flow to jet Reyuolds number ratios are greater than 0. 5, the jet impingement Nusselt numbers arc obviously lower than that without cross-flow.
17. 当横流雷诺数与射流雷诺数之比大于0.5之后,有横流时的冲击射流冷却局部努赛尔数比无横流时有较为显著下降。
When the cross-flow to jet Reyuolds number ratios are greater than 0. 5, the jet impingement Nusselt numbers arc obviously lower than that without cross-flow.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
