合金陶瓷用英语怎么说,合金陶瓷的英文翻译


词语导航

基本信息

词语:合金陶瓷

繁体:合金陶瓷

拼音:hé jīn táo cí

英语翻译

【化】 ceramal

分词翻译

合金的英语翻译:

alloy; metal
【化】 alloy
【医】 alloy
【经】 alloy

陶瓷的英语翻译:

【电】 ceramic

翻译例句

1. 合金陶瓷调整电位计部件中的铅。

Lead in cermet-based trimmer potentiometer elements.

2. 陶瓷合成材料、纳米技术和外形记忆合金卓越地体现于其机体和超高涵道比的推进系统结构。

Ceramic composites, nanotechnology and shape memory alloys figure prominently in the airframe and ultra high bypass ratio propulsion system construction.

3. 在美国,受创最为严重的是触媒转换器制造商。其次是合金与陶瓷生产行业。

In the United States, manufacturers of catalytic converters would suffer the most, followed by the metal alloying and ceramic-making sectors.

4. 每片涡轮机叶片由高强度单晶合金制成,上面覆盖强韧陶瓷涂层。

Each blade is grown from a single crystal of alloy for strength and then coated with tough ceramics.

5. 用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。

For carbide glass ceramics stone precious stones and other heavy-load cutting grinding wear resistance.

6. 成品装置要镀上一层陶瓷泥浆,将陶瓷泥浆烘干再将蜡加热溶化,只留下陶瓷模型,这样融化的合金就可以从中倾倒出来。

The completed assembly is coated with a ceramic slurry, allowed to dry and then heated to melt out the wax leaving a ceramic mould into which the molten alloy is poured.

7. 表壳、表带的材料常见的有塑料、铜、不锈钢、钨钛合金、高科技陶瓷、金等。

Atlas, strap material of common plastic, copper, stainless steel, tungsten titanium alloy, high-tech ceramics, metal, etc.

8. 用不同孔径的泡沫陶瓷过滤器过滤a00、ZL 102合金。

A00 and ZL102 were filtered by the ceramic foam filters which have different aperture diameters.

9. 用于硬质合金、玻璃、陶瓷、石材、宝石等重负荷切割、磨削耐磨性好。

For carbide, glass, ceramics, stone, precious stones and other heavy-load cutting, grinding wear resistance.

10. 用途:用作陶瓷釉,镨黄颜料和稀土永磁合金的原料。

USES: Raw materials for producing yellow pigment in ceramics and RE permanent magnets alloys.

11. 采用稀土改进的化学镀法在多孔陶瓷载体上共沉积钯-银合金膜。

Rare earth improved electroless plating method was developed for simultaneously depositing Pd-Ag alloy film on ceramic support.

12. 金刚石砂轮广泛用作硬质合金、工程陶瓷、光学玻璃、半导体材料、花岗岩等硬脆难加工材料的磨削工具。

Diamond grinding wheels are widely used as grinding tools in manufacturing of hard and brittle materials, such as hard alloy, engineering ceramics, optical glass, semiconductor materials, and granite.

13. 叙述了粉末合金成形的各种方法及陶瓷成型技术原理。

Different methods of powder alloy moulding and the moulding technology principle of ceramics are stated respectively.

14. 用微弧氧化的方法在铸造铝-硅合金基体上获得陶瓷层。

Ceramic coating was obtained by micro arc oxidation on the substrate of casted aluminum silicon alloy.

15. 含油轴承、擦材料、软、性元件、子陶瓷、工合金等。

Oil-retaining bearing, friction material, (soft and hard) magnetic element, electronic ceramics, electrical alloy, etc.

16. 研制成功了可替代合金泵套的陶瓷泵套,既提高了使用寿命,又降低了成本。

Ceramic pump sleeve that may be substituted for alloying pump sleeve was prepared. The pump sleeve has high service life and low production cost.

17. 综述了国内外近年来在惰性阳极方面所做的研究,包括金属氧化物陶瓷阳极、合金阳极、金属陶瓷阳极。

The research works in the field of inert anode are reviewed, including metal oxide ceramic anode, alloy anode, cermet anode.WWW.WeNTIyi.cOM

18. 其中金属陶瓷、金属合金和梯度材料是当前研究的重点。

Currently the cermets, alloys and functional grade materials (FGMs) are focus of researches.

19. 氧吸收或氧化对金属电阻膜、合金电阻膜及金属陶瓷膜的影响及作用机理差别很大。

The effects of oxygen absorption and oxidation on the resistor films of metal, alloy and cermet, and their operation mechanism are quite different.

20. 本机床主要适用于高速钢、硬质合金及陶瓷刀具切削加工黑色金属、有色金属及部分非金属零件的内外圆柱面、内外圆锥面、沟槽、平面。

This series machine is suitable of ferrous, nonferrous metal and some kinds of non-metal materials with hard alloy, high capacity and high speed steel tools.

21. 实验结果得出:含纳米陶瓷涂层能有效的阻滞合金的高温氧化进程,极大的提高了合金的耐高温抗氧化性能。

The experiment results indicate that the nano-ceramic coating can retard inward diffusion of oxygen, which can obviously improve oxidation resistance of the alloy at high temperature.

22. 提出了嵌入形状记忆合金丝和压电陶瓷片作为联合变形驱动器的二元智能结构,并建立了有限元模型。

A hybrid smart structure integrated with shape memory alloy slims and piezoelectric ceramic patches as united actuators, was presented and modeled by finite element methods.

23. 密封面材料:结构陶瓷或超硬表面合金材料二种。

Seal the surface material: Structure pottery or exceeding two kinds alloy materials of hard surface.

24. 利用微弧氧化技术对ZL 108铝合金活塞第一道环槽进行了陶瓷化处理。

The ceramic treatment for the first ring groove of ZL108aluminum alloy piston was conducted with micro-arc oxidation technique.

25. 该研磨纸可 用于众多工件的研磨和抛光,包括金属、金属合金、陶瓷、光学元件、光纤连接器、硬盘、半导体等领域。

The emery paper is applicable in the grinding and polishing of most work pieces including metal, metal alloy, ceramic, optical element, fiber connecter, hard disc and semiconductor, etc.

26. 该研磨纸可 用于众多工件的研磨和抛光,包括金属、金属合金、陶瓷、光学元件、光纤连接器、硬盘、半导体等领域。

The emery paper is applicable in the grinding and polishing of most work pieces including metal, metal alloy, ceramic, optical element, fiber connecter, hard disc and semiconductor, etc.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!