
词语导航
基本信息
词语:裂化器
繁体:裂化器
拼音:liè huà qì
英语翻译
【化】 cracker
分词翻译
裂化的英语翻译:
【化】 cracking
器的英语翻译:
implement; organ; utensil; ware
【医】 apparatus; appliance; crgan; device; organa; organon; organum; vessel
翻译例句
1. 这场努力的目标,是使用流化床催化裂化器把原油转化为汽油。
The aim of their efforts an effective catalytic cracker to convert crude oil into gasoline using a fluidised bed.
2. 这场努力的目标,是使用流化床催化裂化器把原油转化为汽油。
The aim of their efforts, an effective catalytic cracker to convert crude oil into gasoline, using a fluidised bed.
3. 汽车的催化裂化器以及发电厂的过滤器降低了空气中的烟、雾、尘。
Catalytic converters on the cars and better filters on power-plant smoke-stacks have greatly reduced smog, smoke and soot in the air.
4. 加氢裂化反应流出物空冷器(简称REAC)管束属于特种设备,承受高压临氢多相流的冲蚀,易引发恶性事故。
The hydrocracking REAC pipes are special equipments, and easy to lead to serious accidents, for they suffer from the erosion of multiphase flow under the environment of high-pressure hydrogen.
5. 分析了重油催化裂化(RFCC)沉降器结焦的影响因素和机理。
The factors influencing coking within resid fluid catalytic cracking(RFCC) disengagers and the mechanism are analyzed.
6. 长岭炼油厂新型催化裂化装置再生系统旋风分离器尺寸小,不能采用常规氧化铝内衬保护。
Cyclone of a regenerating system in a catalytic cracking unit in the Changling Oil Refining Plantcan not be protected by using conventional linner of alumina because of its small size.
7. 加氢裂化装置空气预热器翅片管经常发生腐蚀,同时产生了大量的腐蚀产物堵塞空气预热器,造成预热器流通不好。
The corrosion often happens to the tubes of air pre-heaters in hydrocracking plants and blocks air pre-heaters so much, that the circulative effect is not well.
8. 催化裂化装置高效汽提技术可有效降低焦炭产率,减轻再生器负荷。
The high efficiency steam stripping technology of catalytic cracking unit can efficiently decrease the coke yield, and mitigate the regenerator"s load.
9. 文章详细分析了形成这些缺陷的原因,并对维护加氢裂化反应器及其系统安全稳定运行提出了建议。
This paper analyzed causes of the defects in details, and raised proposals on maintaining hydrocracking reactor to ensure safe and stable operation of the system.
10. 本文介绍了旋流式分离器的结构、原理和特点以及在催化裂化能量回收系统中的应用情况。
The structure, principle, essential design features and application of the windspoutseparator in FCC energy recovery system are described.
11. 考察了加氢裂化装置高压空冷器加工高硫原油后出现的腐蚀问题,并进行了加注syDY- 101加氢裂化阻垢缓蚀剂的工业试验。
The corrosion happened on the high-pressure air cooler of the hydrocracking unit when processing sour crude was investigated, and corrosion inhibitor SYDY-101 was added for solving the problem.
12. 中国石油庆阳石化分公司催化裂化装置余热锅炉采用ESW激波吹灰器取得了显著的节能效果。wWw.weNTIYI.cOm
It has a remarkable result of energy conservation been obtained by using ESW shock wave sootblower on FCC waste heat boiler in Qingyang Petrochemical Company Branch.
13. 参照加氢裂化某工业装置使用的循环氢气液凝聚器,设计制造了一台相同工艺尺寸的气液凝聚器试验模型。
An industrial full scale cold model of an agglomerator for recycle hydrogen in hydrocracking process was designed and manufactured.
14. 催化裂化(FCC)装置再生器排放的烟气是炼厂最大的空气污染源,包括颗粒物、硫氧化物、氮氧化物和一氧化碳等。
The smoke emitting from FCC regenerator is the largest air pollution source in refining plant, which includes particulates, oxysulfides, oxynitrides, carbon monoxide, and so on.
15. 锦州石化公司一套催化裂化装置沉降器工况不好,导致油浆系统固体含量高而影响装置正常生产。
The high solid content in slurry system, caused by the bad working condition of reactor for the first FCC unit in Jinzhou petrochemical company, affected the normal production of unit.
16. 热壁加氢反应器是炼油工业加氢裂化装置中的关键核心设备,制造工艺复杂,技术难度大。
The hot wall hydrogen reactor which has complicated manufacture process and needs high technology is a key equipment of hydrocracking apparatus in refinery.
17. 催化裂化装置反应器、再生器、烟道、提升管斜插口等部位。
Reactor, regenerator, flue, inclined inserting mouth and so on in catalyst cracking apparatus.
18. 对金陵石化公司炼油厂加氢裂化装置高压空冷器的结垢原因进行了分析,垢物剖析表明该系统结垢物主要由稠环芳烃组成。
The causes of fouling of high pressure air cooler of hydrocracker in Jinlin Petrochemical Company, s refinery were analyzed. The analysis showed that the fouling was formed from polycyclic aromatics.
19. 用动态优化的方法求解催化裂化装置再生器的工艺裕量与控制设计。
The problem of margin analysis and control design of FCC regenerator was solved through multi-objective mixed-integer dynamic optimization.
20. 摘要介绍了近年来催化裂化装置汽提器的研究现状,主要包括档板汽提器的气固流态化行为,环流汽提器和填料型汽提器。
The progress in FCC stripper, including he flowing behavior of gas - solid in baffles stripper, annular stripper and packing stripper, was introduced.
21. 催化裂化提升管反应器数学模型基本上都是基于平推流反应器的假设建立起来的。
Mathematical models for Fluid Catalytic Cracking (FCC) riser reactors were built generally on the basis of assumption of "plug flow" pattern within risers.
22. 建立了前置烧焦罐式高效再生器催化裂化装置的提升管反应器和汽提段的动态数学模型。
A dynamic model of mechanism has been developed for the reactor and stripper of a fluid catalytic cracking unit (FCCU) with a high efficiency regenerator.
23. 以炼油厂催化裂化汽油轻馏分为原料,在固定床微型反应器中对几种分子筛催化剂的醚化活性进行了考察。
Etherification activities of various molecular sieve catalysts were investigated with FCC light ends as feedstock carrying on a fixed bed micro reactor.
24. 以择形分子筛制备的规整载体催化剂,在规整固定床反应器上,进行催化裂化汽油中烯烃转化产低碳烯烃的裂化反应。
The olefin conversion of FCC naphtha to produce light olefins over regular carrier catalyst preparated from shape-selective molecular sieve was studied in a regular fixed-bed reactor.
25. 采用气相色谱-脉冲火焰光度检测器(GC -PFPD),对几种催化裂化汽油中的硫化物进行了定性和定量研究。
Gas chromatography-pulsed flame Photometric Detector (GC-PFPD) was used for the qualitative and quantitative analysis of sulfur compounds in several fluid catalytic cracking gasoline.
26. 在实验室采用固定流化床反应器,研究了催化裂化汽油裂化时的焦炭生成。
Study of coke formation during FCC naphtha cracking was carried on a laboratory fixed-fluidized bed reactor.
27. 以三种轻燃料油为反应原料,在实验室固定流化床反应器上用工业平衡催化剂进行催化裂化反应。
Three kinds of light oil were cracked as feedstocks on regenerated zeolite catalysts in a laboratorial fixed fluidized bed reactor.
28. 根据超短接触时间催化裂化工艺的特点,开发了具有新型原料雾化和剂、油接触方式的下行式反应器。
A newly down flow reactor with new ways of feed atomization and oil catalyst contact was developed according to the characteristic of ultra short contact time catalytic cracking process.
29. 本文针对催化裂化工业装置的提升管反应器以三集总催化裂化反应动力学模型为基础,利用工业装置的现场数据对模型中的参数进行了拟合。
Based on three lumping kinetic model of catalytic cracking, the parameters in the model are estimated with actual operation data of a commercial catalytic cracking riser.
30. 本文针对催化裂化工业装置的提升管反应器以三集总催化裂化反应动力学模型为基础,利用工业装置的现场数据对模型中的参数进行了拟合。
Based on three lumping kinetic model of catalytic cracking, the parameters in the model are estimated with actual operation data of a commercial catalytic cracking riser.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
